Getting To Know Your Machine DP-2000 Options Options DA-AR250/AS200/DS200/DS210/ES200/FG230/FG231/FK200/FK210/FS200/MD200 DA-NE200/PC200/PC210/SM08B/SM16B/SM28B/UC200/XN200/XT200; UE-410047/410048/403171 Making Copies Operating Instructions (For Copier) Before Starting Digital Copier Before operating this copier, please read these instructions completely and keep these operating instructions for future reference. Digital copier with options (See P.
Operation Chart Common Features and Usage ■ Basic Operation MULTI-SIZE FEED 2 SIDED 1 SIDED COPY COPY ENERGY SAVER INTERRUPT SORT FUNCTION RESET STAPLE Original DP-2000 SHIFT COPIED BLANK MEMORY IN COPY OHP 2 in 1 ORIGINAL SIZE 2 PAGE COPY BOOK EDGE COPY SIZE CLEAR REDIAL/ PAUSE ABC LEDGER MARGIN FLASH/ TEXT/ PHOTO ON LINE OUTPUT TRAY DIRECTORY SEARCH LEGAL TEXT ABBR LETTER INTERNET DEF 1 2 3 GHI JKL MNO SUB-ADDR PHOTO FAX MONITOR 4 5 6 PQRS TUV WXYZ 7 8 9
Getting To Know Your Machine Energy Star The DP-2000 copier complies with Tier 2 of the Environmental Protection Agency’s Energy Star Program. This voluntary program specifies specific energy consumption and usage standards for copiers. These copiers will automatically “power down” after a specified period of non-use. The use of these Energy Star compliant copiers will reduce energy consumption and ultimately benefit the environment.
Table of Contents Getting To Know Your Machine Operation Chart .............................................................................................................................. 2 ■ Common Features and Usage .............................................................. 2 Before Starting Precautions ..................................................................................................................................... 6 ■ For Your Safety ............................................
Table of Contents Table of Contents Options Accessories .................................................................................................................................. 38 ■ Components ....................................................................................... 38 ■ Automatic Document Feeder .............................................................. 39 ■ Finisher/Exit Guide Unit ......................................................................
Precautions For Your Safety ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. ■ Caution Labels DANGER-Invisible and hazardous laser radiation when open and interlocks defeated. AVOID DIRECT EXPOSURE TO BEAM.
Precautions Handling ■ Do not look directly at the exposure lamp when Before Starting copying. ■ Do not turn the power switch off or open the front panel during copying. C Do not drop paper clips or other metal objects into the copier. Toner and Paper ■ Store toner, drum and paper in cool areas with low humidity. C High quality paper of 16 lbs - 24 lbs (15 – 34 lbs via sheet bypass) may be used. C For optimum performance, it is recommended that only Panasonic Brand supplies are used in the copier.
Precautions Installation ■ The copier should not be installed in areas with the following conditions: C Extremely high or low temperature and humidity. Ambient conditions Temperature: 50°F – 95°F (10°C – 35°C) Relative humidity: 45% – 85% C Where temperature and humidity can change rapidly, causing condensation. C Direct exposure to sunlight. C Directly in the air conditioning flow. C In areas of high dust concentration. C In areas of poor ventilation. C In areas with chemical fume concentration.
Control Panel LCD Display 2 SIDED 1 SIDED COPY COPY MULTI-SIZE FEED ENERGY SAVER INTERRUPT SORT FUNCTION RESET STAPLE DP-2000 COPIED BLANK MEMORY IN ORIGINAL SIZE COPY OHP 2 in 1 2 PAGE COPY BOOK EDGE COPY SIZE CLEAR REDIAL / PAUSE LEDGER MARGIN FLASH/ TEXT/ PHOTO ON LINE OUTPUT TRAY DIRECTORY SEARCH LEGAL TEXT ABBR LETTER INTERNET DEF 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SUB-ADDR PHOTO FAX ABC 1 MONITOR STOP LETTER PRINTER ON LINE PAPER TRAY LIG
Control Panel No 0 1 2 3 4 5 NOTE 10 Contents Function Key C Use when changing the paper size, initial values for functions (default values) and key operator settings. Reset Key C Resets all features to the initial power-on state. Clear Keys C Clears the copy count in the display. Stop Key C Stops the copy run. 2 in 1 Key C From two 1-sided originals, side by side, to 1-sided copies. 2 Page Copy Key C Copying two facing pages on a ledger size original on two separate letter size sheets. Refer to P.
Control Panel 6 7 8 9 : ; = Contents Book Key C Eliminates dark inner binding shadows. Edge Key C Creates a blank edge. Margin Key C Shifts the image to the right or left. Cursor Keys C Select exposures (I or H) and copy ratio (F or G). Select function modes. Set Key C Set the present selection. ALARM LED C Lights when trouble occurs. ACTIVE LED C Lights when the machine is active. NOTE Refer to P.21 P.21 Before Starting No P.21 P.12 P.
Basic Copy Full Size Copying ■ Copying the Same Size Originals (1:1) Copy size is automatically selected.
Basic Copy Reduction or Enlargement Copying ■ Copying with Preset Ratios MULTI-SIZE FEED 2 SIDED 1 SIDED COPY COPY ENERGY SAVER INTERRUPT SORT FUNCTION RESET STAPLE DP-2000 SHIFT COPIED BLANK MEMORY IN ORIGINAL SIZE COPY OHP 2 in 1 2 PAGE COPY BOOK EDGE COPY SIZE CLEAR REDIAL/ PAUSE ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 LEDGER MARGIN FLASH/ SUB-ADDR PHOTO FAX TEXT/ PHOTO ON LINE OUTPUT TRAY LEGAL TEXT DIRECTORY SEARCH ABBR LETTER INTERNET MONI
Basic Copy Zoom Copying ■ Zoom Copies with variable zoom ratios from 25% to 400% in 1% increments.
Basic Copy Using the Sheet Bypass ■ Copying on Special Paper, etc. 1 Place the original. Open the sheet bypass. 2 Pull out the sheet bypass tray until it stops. (For Ledger size only) 3 # Place approximately 50 sheets of paper into the tray. Do not fill above. Insert the paper until it stops. Side Guides $ Adjust the side guides. Incorrect adjustment may cause the paper to wrinkle, misfeed or skew. Press START. ATTENTION NOTE C Do not feed curled paper through the sheet bypass to avoid misfeed.
2-Sided/Original H Copy (Duplex Copy) 2-Sided/1-Sided Copy ■ Key Operation Press 2-Sided/1-Sided Copy key (circulation) to select a 2-Sided/1-Sided Copy function.
2-Sided/Original H Copy (Duplex Copy) 1 \ 2/2 \ 1/2 \ 2 Copy ■ 1 \ 2 Copy ■ 2 \ 1 Copy From 1-sided originals to 2sided copies. (From Copier Platen & i-ADF/ ADF/ADU) ■ 2 \ 2 Copy From 2-sided originals to 1sided copies. (Using i-ADF) From 2-sided originals to 2-sided copies.
2-Sided/Original H Copy (Duplex Copy) Book \ 2 Copy ■ Book \ 2 Copy From book originals to 2-sided copies. Ledger size originals only.
2-Sided/Original H Copy (Duplex Copy) 2 in 1 Copy ■ 2 in 1 Copy From two 1-sided originals, side by side, to 1-sided pages.
2-Sided/Original H Copy (Duplex Copy) 2 Page Copy ■ 2 Page Copy Copying two facing pages on a ledger size original on two separate letter size sheets.
Margin Book/Edge/Margin ■ Book Key Eliminates dark inner binding shadows when copying from a book. ■ Edge Key Creates a blank edge. ■ Margin Key Shifts the image to the right or left.
Insertion Copy OHP Interleaving ■ OHP Interleaving Inserts paper between the OHP film.
Job Memory ■ Two Copy Jobs Can Be Programmed in Memory (M1 M2) for recall at a later time.
Other Features Energy Saver/Interrupt Mode Energy Saver Key Interrupt Key MULTI-SIZE FEED 2 SIDED 1 SIDED COPY COPY ENERGY SAVER INTERRUPT SORT FUNCTION RESET STAPLE DP-2000 SHIFT COPIED BLANK MEMORY IN ORIGINAL SIZE COPY OHP 2 in 1 2 PAGE COPY BOOK EDGE COPY SIZE CLEAR REDIAL/ PAUSE LEDGER MARGIN FLASH/ FAX TEXT/ PHOTO ON LINE OUTPUT TRAY DIRECTORY SEARCH LEGAL GHI TEXT ABBR LETTER INTERNET 1 ABC DEF 2 3 SUB-ADDR PHOTO MONITOR JKL 5 6 TUV WXYZ 7 8 9 LETTER
Other Features Skyshot Mode ■ When copying from the platen with the platen cover or ADF/iADF open, two types of Skyshot modes can be selected. Manual Skyshot Mode: Making copies from small originals without dark areas around the image. Digital Skyshot Mode : Making copies by detecting the skyshot area.
Other Features Skyshot Mode ■ Copying with the Manual Skyshot Mode C Set Manual Skyshot mode first.
Combined Function Table Other Functions Other Functions Zoom Copy A OOOOOOOOOOOOOOOOO A OO 1 \ 2 Copy O A A A A O A OOOOOOOOO ✕ ✕ A OO 2 \ 1 Copy O A A A A O A OOOOOOOOOO ✕ A OO 2 \ 2 Copy O A A A A O A OOOOOOOOO ✕ ✕ A OO Book \ 2 Copy O A A A A O A O O O O O O O O O ✕ ✕ A O O 2 in 1 Copy OO A A A O A OOOOOOOOO ✕ ✕ A OO 2 Page Copy O A A A A O A OOOOOOOOO ✕ ✕ A OO Book OOOOOOO A OOOOOOOOOO A OO Edge OOOOOOOO A OOOOOOOOO A OO Margin OOOOOOOOO A OOOOOOOO A OO Non-Sort OOOOOOOOOO A A A A A A OO A OO Sort OO
Function ■ Using Function Modes to Change the Initial Copy Modes Options General Functions Copier Settings Fax Settings Internet Fax Settings Printer Settings Internet Fax Settings for Key Operator Printer Settings for Key Operator Input Identification Code General Functions for Key Operator Copier Settings for Key Operator ■ Procedure Fax Settings for Key Operator Function Key Reset Key MULTI-SIZE FEED 2 SIDED 1 SIDED COPY COPY ENERGY SAVER INTERRUPT SORT FUNCTION RESET STAPLE DP-2000
Function General Functions No. Modes 00 SORT MODE DEFAULT 02 POWER ON DEFAULT 05 Function Selects the finisher mode. C Non-Sort, Sort, Staple-Sort, Shift-Sort, Shift-Group ∗ Initial Setting Non-Sort Copy SORT MEMORY USAGE Displays the amount of sort memory used on the panel. C OFF, ON OFF 06 DEPT. COUNTER Copy usage and copy limit of the selected department and total copy usage will appear on the screen. Consult your service technician. 08 SORT-ROTATE Select Sort-Rotate mode.
Function Copier Settings No. 30 Modes Function Initial Setting 00 MARGIN DEF. Selects the margin position and shift value. C Left, Right, Top, Bottom C 5 - 99 mm Left 10 mm 01 EDGE DEF. Equal rate 5 mm 02 BOOK MARGIN DEF. Selects the edge mode (equal rate or individual rate) and width. C Equal rate, Individual rate (Vertical and Horizontal) C 5 - 99 mm Selects the book void width. C 5 - 99 mm 03 FRAME MARGIN Selects the reduction ratio in margin mode. C OFF, ON OFF 04 2-SIDED MODE DEF.
Function General Functions for Key Operator Modes Function 00 PAPER SIZE Sets the paper size of each paper tray.* C Tray-1, Tray-2, Tray-3, Tray-4 01 AUTO RESET TIME 02 ENERGY SAVER MODE Selects the Control Panel reset time. C None, 30 seconds, 1 minute, 2 minutes, 3 minutes, 4 minutes Sets the Energy Saver mode and time.
Function Copier Settings for Key Operator No. Modes 00 PAPER SIZE PRIOR. Specifies the paper size in manual paper size setting mode. Letter 01 ORIGINAL (HOME) Text/Photo 02 TEXT CONTRAST 03 T/P CONTRAST 04 PHOTO CONTRAST 10 MAX.
Function Function Setting ■ Changing the Auto Exposure Setting You can select whether the copying density is adjusted automatically for text and photographic originals.
Function Function Setting for Key Operator ■ Changing the Paper Size The paper trays are designed to accommodate invoice, letter, letter R, legal and ledger size paper. To change the paper size, perform the steps shown below.
Function 3 Changing the Paper Guide and Paper Size Indicator in the Paper Tray # Pull out paper tray and remove paper. % Move the paper guide b to the paper width required. Pinch the stopper to move the paper guide b. Paper Guide a Stopper Paper Guide b & Change the paper size indicator. Size Indicator ( Close the paper tray. NOTE C It is recommended that the paper guide b be fixed in place with screws. Consult an authorized servicing dealer for details on how to fasten using screws.
Function Function Setting for Key Operator ■ Departmental Counter The Key operator can manage, limit copies, counters and code numbers for each department.
Function 3 Change the Department Counter number, limit the maximum number of copies and Department ID Code. 14 DEPT.COUNTER MODE 1:TOTAL COUNTER DEPT.COUNTER 01:123456 ) Press 2 and the SET key. * Press the Keypad and the SET key (or F G keys) to select the Department No. 01: 123456 Counter (6 digits) Department No. MAX COPIES 01:123456 + Press 0 and the SET key (Input “0”) to clear the counter. 01: 123456 Maximun number of copies (6 digits) Department No. I.
Accessories Components 1-Bin Finisher (or) Exit Tray (Outer) (DA-FS200) (DA-XT200) C Large capacity (Max. 1000 copies) ADF, Automatic Document Feeder (DA-AS200) C Feeds originals automatically. C For 2 in 1 copying. C Multi-size feeding. i-ADF, Inverting Automatic Document Feeder (DA-AR250) C Feeds originals automatically. C For 2 in 1 copying. C Multi-size feeding. C For duplex copying.
Accessories Automatic Document Feeder ■ ADF (DA-AS200)/i-ADF (DA-AR250) 1. Features # Automatic Original Feeding C The ADF/i-ADF tray can hold up to 50 originals of 20 lbs paper. (30 originals/legal, ledger) It can accommodate originals from invoice to ledger size. C Automatic original size detection. $ Duplex Copying (DA-AR250) CThe i-ADF allows you to copy 2-sided originals either manually or automatically. % Multi-Size Feeding C Different size originals can be copied full size (1:1) or same size.
Accessories Automatic Document Feeder 3.
Accessories Finisher/Exit Guide Unit 1. Features DA-FS200 (Finisher) Shift-Group Shift-Sort Staple-Sort C Shift electronic sort copy C Staple electronic sort copy DA-FK200/FK210 (Dual-Path Exit Guide Unit/Paper Transport Unit) C Feeds paper to finisher 2.
Accessories Finisher/Exit Guide Unit 3. Replacing the staple cartridge ADD STAPLES U11 42 The message shown on the left appears when the staples run out. 1 Hold the latch and pull out the finisher. 2 Remove the staple cartridge. 3 # Remove the empty staple case. 4 Pull out the tape. $ Install the new staple case.
Accessories 6 Return the finisher to the original position. (Check that the latch is securely fastened.) Options 5 Reinstall the staple cartridge.
Accessories Finisher/Exit Guide Unit 4. If the unit fails to staple after replacing the staple cartridge, follow the instructions below. 44 1 Remove the staple cartridge. 2 # Open the staple cover. $ Remove the residual staple. % Close the staple cover. 3 Reinstall the staple cartridge.
Problem Solving J) Adding Paper (J ■ 550-Sheet Paper Tray 1 Pull the paper tray out of the copier. 2 Place the paper with the copying surface facing upward. 3 Make sure paper is not loaded above the overfill indicator located in the paper tray. 4 Firmly push the paper tray back into the copier. Options Special papers, like glossy paper, mailing labels and transparencies cannot be used in the paper tray. Use the sheet bypass for special paper.
Problem Solving ?) Replacing the Toner Cartridge and Waste Toner Box (? 1 Open the front cover. 2 Slowly pull the waste toner box straight out. 3 Close the box with the enclosed cap. Cap 4 ATTENTION 46 Pull on the Green release latch to remove the Toner Cartridge out of the machine while holding it by the Green handle. C For optimum copy quality use the recommended Panasonic toner. Store toner in a cool dark place. Do not unseal toner before use. Use it as fast as possible after unsealing.
Problem Solving 5 Shake the new toner cartridge well. 6 Install the new toner cartridge into the machine, and pull out the protective seal. Note: Pull on the seal slowly and straight out. 7 Install a new waste toner box. 8 Close the front cover. ATTENTION ? C Do not reuse the toner from the waste toner box.
Problem Solving Removing a Misfeed Paper ■ Paper Misfeed Indicators and Locations When a paper misfeed occurs, the misfeed indicator and the misfeed location(s) will be displayed on the panel display.
Problem Solving ■ Finisher C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 Pull out the finisher. 2 Lift up the lever and clear the paper jam. 3 Return the finisher to the original position. c ATTENTION C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving Removing a Misfed Paper ■ Paper Transport Area C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 Push the latch to open the cover. 2 Remove the misfed paper. 3 Close the cover by pushing the latch. ATTENTION 50 (Check that the latch is securely fastened.) C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving ■ Paper Entry Area C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 Open the right cover. 2 Remove the misfed paper. 3 # Open the heat roller cover. $ If copy paper is fed far into the copier, turn the right paper clearing knob. % Remove the misfed paper. Continued on the next page... I ATTENTION C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving 4 Automatic Duplex Unit (ADU) 5 Close the right cover. ATTENTION 52 # Open the paper feed guide. $ Remove the misfed paper. C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving ■ System Console C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 # Pull out the paper tray. $ Remove the misfed paper. % Return the paper tray to the original position. 2 # Open the feed cover. $ Remove the misfed paper. % Close the feed cover. I ATTENTION C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving ■ ADF/i-ADF C Make sure that the misfeed indicator goes off after removing all misfed paper. 1 # Open the ADF cover. $ Remove the misfed paper. % Close the ADF cover. 2 # Open the Platen cover. $ Remove the misfed paper. % Close the Platen cover. & Open and close the ADF cover to reset the error. ATTENTION 54 C Push the tab on the center of the ADF cover to close it. C Make sure that the misfeed indicator goes off after removing all misfed paper.
Problem Solving 3 # Lift up the ADF Input Tray. $ Remove the misfed paper. % Close the ADF Input Tray. & Open and close the ADF cover to reset the error. 4 # Lift up the ADF Input Tray. $ Open the ADF exit cover. % Remove the misfed paper. & Close the ADF exit cover. ( Close the ADF Input Tray. F ATTENTION C Make sure that the misfeed indicator goes off after removing all misfed paper.
Troubleshooting Before Calling Service Check Action Unit does not operate 56 Does the display light? Check if the Power Switch is turned On and if the power plug is inserted into the outlet. Does the Energy Saver key flash (or light) and displays are turned OFF? (See P.24) Press Energy Saver key on the control panel. Does any of the U## codes and messages appear on the display? (U0, U4, U10, U12, U13....etc.,) Perform actions in accordance with each message.
Troubleshooting Check Action Light Copies Does the exposure indicator say “lighter”? Press the Scroll key until the indicator LED is set to Darker. (See P.12) Does the add toner indicator and message appear on the display? (?) Replace the Toner Cartridge. (See P.46) Marked Copies Is the copier platen glass or platen cover dirty? Clean the glass or platen cover.
Troubleshooting Replacing the Battery The copier has an internal battery (Product No.: CR2032) which maintains the date setting in the event of a power outage. ■ Battery Replacement Required Message REPLACE BATTERY U90 ■ Battery Replacement Procedure 1 Turn the power off. Pull out the battery holder. 2 Replace the battery. 3 Reinstall the battery holder. 4 Turn the power on. Set the date and time. (See P.
Specifications ■ DP-2000 (Copier) Type: Desk Top Platen Type: Fixed Acceptable Originals: Sheets, Books (max. Ledger) Copying Method: Laser Electrophotography Fixing Method: Heat Roller Fixing Imaging Method: Dry-Type Single component imaging Resolution: Max. 600 dpi Maximum Copy Size: Ledger - Invoice via paper tray Void Area: Max. 0.2″ (5 mm) Warm Up Time: Approx. 35 seconds (68°F/20°C) First Copy Time: 4.
Specifications ■ ADF (DA-AS200), i-ADF (DA-AR250) DA-AS200 DA-AR250 Tray Capacity: Letter, Invoice: 50 sheets (20 lbs) Ledger, Legal: 30 sheets (20 lbs) Paper Size: Invoice/Letter/Legal/Ledger Paper Weight: 14 – 28 lbs (50 – 110 g/m2) Electrical Requirements: Supplied from the copier Dimensions (W)(D)(H): 21.7″ (W) × 20.5″ (D) × 5.3″ (H) (552 × 520 × 135 mm) Weight: 18.3 lbs (8.3 kg) 20.5 lbs (9.
Options and Supplies ■ The DP-2000 is a digital photocopier which can produce images with great clarity. Furthermore, its copying functionality can also be greatly enhanced by the addition of the following options and supplies. We hope you find that the wide ranging capabilities will make your office-place more productive and efficient.
Options and Supplies ■ For Fax Part Name Part No.
U.S.A. Only WARRANTY “PANASONIC DOCUMENT IMAGING COMPANY MAKES NO WARRANTIES, GUARANTEES OR REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS PANASONIC COPIER, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
