Getting To Know Your Machine Operating Instructions (For Copy & Network Scan Functions) DP-190 Before operating this equipment, please read these instructions completely and keep these operating instructions for future reference. English Appendix Problem Solving Network Scanner Function Making Copies Model No.
Getting To Know Your Machine Useful Office Functions Copy Fax/Email • Copy up to Legal size originals. • Capable of copying text/photos/ halftone originals. • Plain Paper High-speed Super G3 compatible Fax with JBIG compression. • Quick-Scan • Quick Memory Transmission • Email Function capability. Scan/File • Monochrome/Color scanner capability. • Scanning resolution up to: Monochrome : 600 dpi Color : 300 dpi • A document can be scanned in Color.
Getting To Know Your Machine Operating Instructions Outline Getting To Know Your Machine ● Precautions (See pages 7-13) ● Quick Operation Chart, Adding Paper (See pages 14, 15) ● Problem Solving, Memory Full, Replacing Toner Cartridge, Removing a Misfed Paper, Error Codes (U Code/J Code) (See pages 15-21) Before Starting ● Control Panel Key/Indicator Names Making Copies ● Operating Instructions for making copies (See pages 24-33) Function ● Changing the Initial Machine Modes ● General, Copier, Prin
Getting To Know Your Machine Symbols/Icons A B C The following Symbols/Icons are used throughout this operating instructions manual. Place original(s) on the ADF Getting to know your machine Before starting Place original on the Platen (Book) When making copies Place original on the Platen (Sheet) Press any Hard Key on the Control Panel When setting the machine modes Press Hard Key When scanning document(s) Input numbers Input text with a Keyboard ● Number of Copies, etc.
Getting To Know Your Machine Getting To Know Your Machine Table of Contents Getting to Know Your Machine Useful Office Functions .................................................................................................................. 2 Multi-Tasking Job Table .................................................................................................................. 2 Operating Instructions Outline .............................................................................................
Getting To Know Your Machine Table of Contents Network Scanner Document Scanning ..................................................................................................................... 46 ■ Document Scanning ....................................................................................... 46 Address Book ................................................................................................................................ 48 ■ Adding your PC's IP Address ........................
Getting To Know Your Machine Getting To Know Your Machine Precautions ■ Laser Safety LASER SAFETY This unit employs a laser. Only qualified service personnel should attempt to service this device due to possible eye injury. CAUTION: USE OF CONTROLS, ADJUSTMENTS OR PERFORMANCE PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.
Getting To Know Your Machine Precautions For Your Safety To prevent severe injury and loss of life, read this section carefully before using the Panasonic DP-190 to ensure proper and safe operation of your machine. ■ This section explains the graphic symbols used in this Operating Instructions manual. WARNING: Denotes a potential hazard that could result in serious injury or death. CAUTION: Denotes hazards that could result in minor injury or damage to the machine.
Getting To Know Your Machine Never touch a power cord with wet hands. Danger of electric shock exists. If the power cord is broken or insulated wires are exposed, contact your Service Provider for a replacement. Using a damaged cord can cause fire or electric shocks. Stop operation immediately if your machine produces smoke, excessive heat, unusual noise, or smell, or if water is spilt onto the machine. These conditions can cause fire.
Getting To Know Your Machine Precautions CAUTION Do not place a magnet near the safety switch of the machine. A magnet can activate the machine accidentally, resulting in injuries. Do not use a highly flammable spray or solvent near the machine. It can cause fire. When copying a thick document, do not use excessive force to press it against the document glass. The glass may break and cause injuries. Never touch a labelled area found on or near the heat roller. You can get burnt.
Getting To Know Your Machine For Your Safety ■ The maximum power consumption is 900 W. A properly wired (grounded), dedicated, 15A, 120V AC outlet is required. Do not use an extension cord. The power cord on this machine must be used to disconnect the main power. Please ensure that the machine is installed near a wall outlet and is easily accessible. Caution Note: Unplug the power cord from the wall outlet before removing covers.
Getting To Know Your Machine Precautions Ventilation ■ The machine should be installed in a well-ventilated area to minimize the ozone density in the air. WARNING For USA FCC WARNING: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Getting To Know Your Machine ■ Key Operator Password ● The Initial Machine Modes can be checked or changed with the Function Modes, however, these modes require the Key Operator Password. For Key Operator : When setting up this machine, please consult with the authorized service provider, and decide on the Key Operator Password together, then record it and keep it in a safe place for future reference. ■ Dept. (Departmental) Code When the Department Counter function is set up, the Dept.
Getting To Know Your Machine Operation Chart From ADF or Turn the Power Switch on the Left side of the machine to the Adding Paper ON position. 1 2 Face Up A B C ■ Quick Operation Chart If set in other function mode Original Guides* Tray Adjust to the (Max. 50 Letter original's width size originals) * Hold the guides by the center when adjusting the width. From Platen Original Guides Face Down ● If the original is not positioned properly, a portion of the original may not be copied.
Getting To Know Your Machine 5 4 3 Reduction/ Enlargement only LTR ->LTR [LTR 1] ZOOM:100% COPIES:001 LTR ->INV [LTR 1] ZOOM: 65% COPIES:001 Select desired settings (See pages 24-33) Number of Copies (Max. 999) ■ Copying onto Transparency Film (OHP), Thick Paper Stock, etc. (except thin paper) Before Pressing Start Key Making Copies 1 Open Rear Cover. 2 Catch the ejected copy (do not pull). 3 When finished, close the Rear Cover.
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Replacing Toner Cartridge and/or Drum Unit Low Toner Warning Low Toner message will follow this progression: (Replace the Toner Cartridge before toner runs out) TONER IS RUNNING LOW Toner is Low. 1 U13 Machine can make less than 500 copies*. * Based on 5% coverage (see page 11) 1 Front Cover WARNING TONER LOW Toner is nearly Empty. LESS THAN 50 PAGES Machine can make less than 50 copies. 2 OUT OF TONER 3 4 Toner is Empty.
Getting To Know Your Machine 2 Drum Unit/Toner Cartridge 3 Drum Unit/Toner Cartridge 1 To replace the Toner Cartridge: Perform steps (4 - 14). (Skip step 6) 2 To replace the Drum Unit: Perform steps (4 - 18). (Skip steps 5, 7 and 10) 3 To replace the Toner Cartridge and Drum Unit: Perform steps (4 - 18). To replace the Toner Cartridge only: 5 Drum Clean the excess toner with a soft cloth.
Getting To Know Your Machine Operation Chart ■ Problem Solving ● Removing a Misfed Paper (Paper Feed/Paper Transport/Automatic Duplex Unit Area) J44, J82, J83: 1 2 (Ex.) REMOVE MISFED PAPER J44 Misfed Paper Rear Cover NOTE: The J## Code indicates the most probable Jam location. If the jam message reappears after the jam is cleared, paper is most likely jammed at other location(s). Check the Jam Error Codes Table on page 20 for other check points and remove all misfed paper.
Getting To Know Your Machine 3 4 5 Rear Paper Tray Cover 6 Paper Tray Rear Cover 8 9 Front Cover Paper Tray 3 Drum Unit/Toner Cartridge 4 Misfed Paper 5 6 Misfed Paper 8 ATTENTION ● Do not scratch or touch the surface of the OPC Drum (Green) with bare hands. The OPC Drum is sensitive to light. To prevent optical exposure problems, do not expose the OPC Drum to direct sunlight or bright light.
Getting To Know Your Machine Operation Chart ■ Problem Solving ● User Error Codes (U Code) U20/U21 U90 U01 U13 U16 Code Check Points Code Check Points U01 Front Cover is open. U20 ADF Cover is open. U13 Low Toner. (See page 16) U21 ADF was opened while feeding a document. U16 Drum Unit/Toner Cartridge is not installed correctly. U90 Battery requires replacement. (See page 58) ● Jam Error Codes (J Code) Code Check Points Code J00 1 Remove paper from the Sheet Bypass.
Getting To Know Your Machine ATTENTION Correct (Side View) Incorrect When the optional Paper Tray-2 is installed, and either Paper Tray (Tray-1 or Tray-2) is not closed firmly, paper jam may occur. NOTE: When the optional Tray-2 is installed and the same size of paper is loaded in both trays, the paper will feed from Paper Tray-2 first. This is the default setting, if you wish to change the setting, please consult with your service provider.
Before Starting Control Panel 1 2 32 No. 3 4 29 28 31 30 27 5 6 7 8 26 25 24 Contents Icon ORIGINAL Key To select type of Original. (See page 25) 4 11 23 22 No. MEMORY IN key To store the desired copy job(s). M1 Key To store/recall a job or custom original size stored in memory. (See page 33) 1 9 10 21 Icon 12 20 13 14 19 15 16 18 17 Contents COLOR Key Use when scanning the document. (See page 46) COPY Key To use the unit as a photocopier.
Icon Contents RESET Key Resets each selected copy/ scan modes to default settings. 18 SET Key Sets the parameter(s) of Function settings. 20 FUNCTION Key Use when changing the paper size, initial function values (default values) and key operator settings. 22 ALARM LED (RED) Lights/Flashes when trouble occurs. Lights: Machine detected a trouble status ● No paper in the selected tray or toner has run out. ● Machine detected trouble, such as paper misfed or jammed.
Making Copies Basic Copy ■ Copying the Same Size Originals (1:1) Copy size is automatically selected. 1 A B C 2 or 100% Platen Glass ∗ LGL and MIX are available with ADF only. MIX (See page 32) LTR : Letter-R INV : Invoice INV : Invoice-R LGL∗ : Legal MIX∗ : Letter-R and Legal ■ Sort Mode Sort 1 2 1 3 2 1 3 Multiple copy sets are sorted automatically. 2 Non-Sort 3 Copy is stored on the Output Tray. NOTE: Initial Sort Function settings can be selected within the Copier Mode Settings.
3 4 Press the DARKER/LIGHTER Keys to adjust the Exposure manually. Number of Copies (Max. 999) DARKER Key Select the type of Original(s) by pressing ORIGINAL Key TEXT/PHOTO : Text and Photo combined PHOTO : Mainly Photo TEXT : Mainly Text From Platen only The following steps, illustrate how to make multiple copies when the Sort Mode is selected. ANOTHER ORIGINAL? 1:YES 2:NO 1: YES 2: NO Continues to copy another original, repeat steps 1 and 4- 2 . Starts making copies.
Making Copies Creative Features 2 Copy 1 2-Sided Copy 2 Short Edge Originals 3 Long Edge Originals ABC A B 2 C1 This function can be combined with N in 1 function. NOTE: When using the Sheet Bypass, 1→2 Copy function is not permitted. LTR : Letter-R INV : Invoice INV : Invoice-R LGL∗ : Legal 1 2 3 or ∗ LGL and MIX are available MIX∗ with ADF only.
3 4 5 6 Select Duplex mode Bind Position (Select within 10 sec.) 2 Copy : 1-Sided to 2-Side Copy Long Edge 9 From Platen only. Number of Copies (Max. 999) Making Copies 1 ~ Short Edge 8 9 PRESS START TO CONTINUE The following steps, illustrate how to make multiple copies when the Sort Mode is selected. (See pages 24 and 38) 10 ANOTHER ORIGINAL? 1:YES 2:NO 1: YES 2: NO 4 3 Exits this mode. Continues to copy another original, repeat steps 1 and 5- 2 to step 8. Starts making copies.
Making Copies Creative Features ■ N in 1 This function can be combined with 1→2 function. 2 A B C 1 From two/four 1-Sided originals, side by side, to 1-Sided pages. or ● 2 in 1 Copy ∗ LGL and MIX ● 4 in 1 Copy 1 1 2 3 4 3 are available with ADF only.
3 For Preset Ratios 4 For Variable Zoom Ratios : Letter-R INV : Invoice-R LGL : Legal Up to 200% in 1% Down to 50% in 1% 6 7 8 Steps 7 to 11 for Platen only D E F LTR Making Copies 5 ANOTHER ORIGINAL? 1:YES 2:NO 9 Next Original 1: YES Go to next step. NOTE: If “2: NO” is selected, the machine will start copying only 1-Sided scanned original. The following steps, illustrate how to make multiple copies when the Sort Function is selected.
Making Copies Other Features ■ Double Exposure 1 From 2-Sided originals to 1-Sided copies (side-by-side image). Back Side Image Front Side Image ex. Invoice NOTE: When copying portrait original, set the Portrait in the Copier settings, 1:ORIENTATION of Parameter No. 05 (N in 1 DEF.). (See page 38) A B C A B C Front Side Image Front Side of Original (Maximum size : INVOICE) DEF ABC Copy Size: Invoice ABC Original Size: Maximum Invoice ex.
4 5 1: YES Go to next step. Number of Copies (Max. 999) Select Invoice or Invoice-R as original direction. 8 9 NOTE ● An incorrect exposure may occur when there is a black line at the edge of the original or an image which the machine interprets as a black pattern in this mode. ANOTHER ORIGINAL? 1:YES 2:NO 2: NO 6 NOTE: If “2: NO” is selected, the machine will start copying only 1-Sided original. The following steps, illustrate how to make multiple copies when the Sort Mode is selected.
Making Copies Other Features ■ Multi-Size Feeding Use this function when copying mixed (Legal & Letter) size originals through the ADF. The original's size is automatically detected and copied full size. This function is available only when the optional Tray-2 is installed and both Legal and Letter-R size papers are loaded in Tray-1 and Tray-2 respectively. 1 NOTE: 1. The default original size is "LETTER".
3 Select MIX LTR : Letter-R INV : Invoice INV : Invoice-R LGL∗ : Legal MIX∗ : Letter-R and Legal For Variable Zoom Ratios only Up to 200% in 1% Down to 50% in 1% 4 Number of Copies (Max. 999) Making Copies 2 ∗ LGL and MIX are available with ADF only. MIX (See page 32) ■ Job Memory Copy Job can be stored in Memory (M1) for recall at a later time. ● Job Memory mode will not be deleted even if the power switch is turned Off. To store a job in memory 1 Set up the copy job to be stored.
Function ■ Using Function Modes to Change the Initial Machine Modes General Settings Copier Settings Fax/Email Settings Printer Settings Scanner Settings Input Key Operator Password (See page 13) General Settings for Key Operator Copier Settings for Key Operator General Settings: Printer Settings for Key Operator Changing the Initial Machine Modes ● Power On Default Mode, Key Operator Mode, etc. (See page 36) For Key Operator: Paper Size, Department Counter, Network TCP/IP settings, etc.
Copier Settings: Changing the Initial Copy Modes ● Default function of each copy mode (See page 38) For Key Operator: Original setting, Contrast, etc. (See page 39) Printer Settings: Changing the Initial Printer Modes ● Default function of each print mode (See pages 39 and 40) For Key Operator: Job completion time, Page protection, Error page print, Spool function, PS configuration, Font list print, Mailbox data handling, etc.
Function ■ General Settings No. Modes Function Initial Setting 00 POWER ON DEFAULT Selects the default operation mode. 1:COPY / 2:FAX / 3:PRINTER / 4:SCANNER 1:COPY 01 SORT MEMORY USAGE Selects whether to display the amount of sort memory used on the control panel. 1:OFF / 2:DISPLAY 1:OFF 02 DEPT. COUNTER Displays the Total Copy usage and copy limit of Consult your authorized the selected department.
■ General Settings (For Key Operator) (Continued) No. Modes Initial Setting Function ORIG. SET BEEP ADF Selects whether to enable the sound when paper is placed on the ADF. 1:INVALID / 2:VALID 2:VALID 13 DEPT. COUNTER MODE Monitors the copy usage of each department. 1: TOTAL COUNTER 2: DEPT.
Function ■ General Settings (For Key Operator) (Continued) No. Modes Initial Setting Function 30 DEVICE NAME*1 Inputs the device name when required. (For Status Monitor/EtherTalk Machine Name) 31 DEVICE LOCATION*1 Inputs the device location when required. (For Status Monitor) Panasonic DP-190 NOTE *1 When Parameter No 30 and 31 are set, cycle the power by turning the Power Switch on the Left Side of the machine OFF and ON. ■ Copier Settings Initial Setting No. Modes 04 2-SIDED MODE DEF.
The following Parameter Settings require the input of the Key Operator Password: ■ Copier Settings (For Key Operator) Modes Initial Setting Function 00 COPY SETTING LIST Prints the copier settings list. PRESS SET TO PRINT 01 ORIGINAL (HOME) Selects the default Halftone setting. 1:TEXT / 2:TEXT/PHOTO / 3:PHOTO 2:TEXT/PHOTO 02 TEXT CONTRAST Selects the contrast setting for the Text mode. 1-5 3 03 T/P CONTRAST Selects the contrast setting for the Text/Photo mode.
Function ■ Printer Settings (Continued) No. Modes Initial Setting Function 05 2-SIDED PRINT Selects whether the 2-Sided print setting is enabled. 1:OFF / 2:ON 1:OFF 06 BIND POSITION Sets the bind position. 1:LONG EDGE / 2:SHORT EDGE 1:LONG EDGE 07 RESOLUTION Sets the resolution setting. 1:300dpi / 2:600dpi / 3:1200dpi 2:600dpi 08 FONT (PCL)*1 Sets the PCL font. 0-99 0 09 SYMBOL TABLE (PCL)*1 Sets the PCL symbol table. 0-35 11 10 PITCH (PCL)*1 Sets the PCL pitch. 0.44-99.99 10.
■ Printer Settings (For Key Operator) (Continued) No. Modes Initial Setting Function ERROR PAGE PRINT Select whether to print the error page. 1:OFF / 2:ON 2:ON 04 SPOOL FUNCTION Select whether to enable the spool function. 1:OFF / 2:ON 2:ON 05 TEXT PRINT Select whether to print the text page only. 1:OFF / 2:ON 2:ON 06 PS CONFIGURATION*1 Prints the PS configuration page. PRESS SET TO PRINT 07 FONT LIST PRINT (PCL)*2 Sets the PCL printing font list.
Function For Example ■ Changing the Paper Size (Paper Tray) The Paper Trays are designed to accommodate A4, Letter, Legal Size paper. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ or If set in other function mode 7 1: General Settings 8 KEY OPR. MODE (00-31) ENTER NO.
4 5 1:GENERAL SETTINGS PRESS SET TO SELECT 6 GENERAL PARAM. (0-9) ENTER NO. OR ∨ ^ 09 KEY OPERATOR MODE ENTER PASSWORD=_ 7 or 3-digit (See page 13) 9 (09 "KEY OPERATOR MODE") 9 10 TRAY-1 LETTER 11 ∨ ^ 12 When selecting Tray-1 with LETTER/A4 size media. PAPER TYPE=PLAIN 1:PLAIN 2:OHP LETTER 13 A4 LEGAL 16 When the optional 2nd Paper Feed Module (TRAY-2) is installed, press the SET Key once and repeat steps 9 to 10.
Function For Example ■ Department Counter The Department Counter feature can limit the number of copies, administer counters and Identification Code numbers for each department. (Maximum Number of Departments: 50) Contact your authorized service provider to enable the Department Counter feature. 1 2 3 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ or If set in other function mode 7 1: General Settings 8 KEY OPR. MODE (00-31) ENTER NO. OR ∨ ^ 13 DEPT. COUNTER MODE 1: TOTAL COUNTER or 13 (DEPT.
4 5 GENERAL PARAM. (0-9) ENTER NO. OR ∨ ^ 6 09 KEY OPERATOR MODE ENTER PASSWORD= 7 or 3-digit (See page 13) 9 (09 "KEY OPERATOR MODE") 9 DEPT. CODE (1-50) ENTER NO. OR ∨ ^ 10 DEPT. COUNTER 01:123450 MAX COPIES 01:123456 ID CODE SET 01:0123 SET SET Function DEPT. COUNTER 02:123500 MAX COPIES 02:125000 ID CODE SET 02:45678 Department No (01-50) SET 12 Next Department 11 or 2 KEY OPR. MODE (00-31) ENTER NO.
Network Scanner ■ Document Scanning When the Panasonic Document Management System (Panasonic-DMS) is installed and configured on your PC, document(s) can be scanned from the machine to the PC. Direct Connection (with Crossover Cable, see page 54) ● Document Scanning directly from the machine to your PC using Windows “My Network Places” or “Network Neighborhood”. NOTE: USB Port is used for printing only, and is not available for local scanning.
Select a Station (PC's IP Address) 3-1 ABBR 3-2 3-3 4 ABBR No. (2-digit) ABBR [_ ] ENTER ABBR No. DIRECTORY SEARCH 3-1 [01]SALES 10.74.252.66 SCANNING DOCUMENT PAGES=001 01% 3-2 3-3 4 Enter a letter(s) of a name you wish to search ENTER LETTER (S) _ 3-1 3 [06]SALES_3 [05]SALES_2 10.74.252.66 [01]SALES 10.74.252.66 10.74.252.66 3 * Available only when the Fax Parameter No. 119 setting is set to “1: ONE TOUCH” or “2: QUICK NAME SEARCH”.
Network Scanner Address Book ■ Adding your PC's IP Address If the Scanner Configuration is not set with the Panasonic Communications Utility of Panasonic-DMS software (refer to Panasonic-DMS CD-ROM), input your PC's IP Addresses using the machine's Keyboard. 1 2 3 MAY-02-2004 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO. OR ∨ ^ or 1: SET MODE 7 8 1:ONE-TOUCH 2:ABBR NO. :One-Touch For ONE-TOUCH 9 ONE-TOUCH< > PRESS ONE-TCH OR ∨ ^ IP ADDRESS One-Touch Key* 0-9, For ABBR No. or :ABBR No.
4 1:SET MODE? PRESS SET TO SELECT 5 6 SET MODE (1-2) ENTER NO. OR ∨ ^ 1:ADDRESS BOOK ? PRESS SET TO SELECT 7 10 11 Enter a Station Name PC <13> (Max. 40 characters) When inputting a special character, press the "_/()..." Key and use the ( Cursor Keys to select a character. FTP: Consult with your network administrator. / ) When changing the stored character, move the cursor ( ) back to the character and press the CLEAR Key then input a new character.
Network Scanner Function ■ Scan Parameters 1 2 3 MAY-02-2004 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO. OR ∨ ^ or 1: SET MODE 7 SCAN PARAM. (0-7) ENTER NO. OR ∨ ^ Refer to Function settings on page 41. ● Prints Scanner Settings List Sets Original Mode Sets Compression Mode Sets Resolution Sets File Type/Name or ■ Select Mode When adding a file name, selecting the compression format or gray scale mode before scanning document(s). 1 2 3 MAY-2-2004 04:28 READY TO SCAN FUNCTION (1-2) ENTER NO.
4 1:SET MODE ? PRESS SET TO SELECT 5 SET MODE (1-2) ENTER NO. OR ∨ ^ 6 2:SCAN PARAMETERS ? PRESS SET TO SELECT 7 4 2:SELECT MODE ? PRESS SET TO SELECT 5 SELECT MODE (1-3) ENTER NO. OR ∨ ^ 6 Network Scanner : Scan File Name When adding a file name. or : Compression When selecting a compression format. or (When Custom is Selected) SCAN FILE NAME ENTER NAME : Gray Scale When scanning the color original with Gray Scale mode. When inputting a special character, press the "_/()...
Network Scanner Remote Copy Scanned image data can be printed on other Printers through the PC(s) connected on the network. The Remote Copy Utility is installed on your PC as part of the Panasonic-DMS software. This utility allows you to copy documents Scanned on the DP-190 and have them printed on any printer. With the DP-190's Color Scanning capabilities, this allows you to Remote Copy color documents.
3 REMOTE COPY NO. OF COPY=_ Number of Copies (1-99) REMOTE COPY 6 SELECT DESTINATION LTR 4 5 7 Select the Remote destination Printer (PC's IP Address) (See page 47) PC will output the received data to the default (desired) printer. Scanned image data will be transferred to the selected PC. NOTE: The paper size defaults to the size which has been set by the remote copy configuration and the output printer driver.
Network Scanner Direct Connection (with Crossover Cable) ■ Direct Connection (with Crossover Cable) 1 2 Connect a Crossover LAN Cable between your machine and the PC. Turn OFF* the Power Switch (Machine and the PC). To Machine To PC LINK 10/100BAS E-TX RX HANDSE T TEL LINE LAN Cable (Crossover) LAN Cable (Crossover) (Rear Side of Machine) (Rear Side of PC) NOTE: Do not use Standard LAN Cable. 5 Turn OFF* and ON the Power Switch (Machine and the PC).
4 3 Turn On the Power Switch (Machine and the PC). Input the Network Address (Machine and your PC). ● IP and Gateway Address IP: 192.168.0.1 (Machine) 192.168.0.2 (Your PC) Subnet Mask: 255.255.255.0 (Machine & the PC) ● How to input the network address: For your Machine: See page 44 For your PC: See below 5 NOTE: * If you use the DHCP server, select to disable the DHCP server. Machine : See page 45. Your PC : Consult your System Administrator.
Problem Solving Troubleshooting Check Action Unit Does Not Operate Does the display light? Check if the Power Switch (Main Power Switch on the Left Side of the machine) is turned ON and if the power cord is plugged into the AC outlet. Does the Energy Saver key flash (or light) and the display is turned OFF? (See page 32) Press Energy Saver key on the control panel. Does any of the U## codes and messages appear on the display? (U1, U13, U16....etc.) Perform actions in accordance with each message.
Check Action Marked Copies Is the machine’s Platen Glass or Platen Sheet dirty? Clean the Platen Glass or Sheet. Are the machine’s ADF Rollers or Separation Rubber dirty? Clean the ADF Rollers or Separation Rubber. (See below) Is the original a transparency film or a dark original? Cover the original with a sheet of white paper before copying or lighten the exposure setting. If a dark vertical 0.8-1.2 inch (2-3 cm) wide line appears on the printed copy. Clean the Corona Wire of the Drum Unit.
Problem Solving Replacing the Battery/Set the Date and Time The machine has an internal battery (Product No.: CR2032) which maintains the date and time. In the event the battery requires replacement, the following message will be displayed. REPLACE BATTERY 1 2 Remove 1 Screw Turn the Power Switch on the Left Side of the machine to the OFF position.
3 Used 4 5 Install 1 Screw Turn the Power Switch on the Left Side of the machine to the ON position. 6 Battery Holder New “+” side of battery should be facing upwards. (Observe the polarity, see CAUTION! below) 7 FUNCTION MODE (1-2) ENTER NO. OR ∨ ^ 9 8 GENERAL PARAM.(0-9) ENTER NO.
Appendix Specifications ■ DP-190 (For Copier) Type: Desk Top Platen Type: Fixed Acceptable Originals: Sheets (Max. Legal size, with the ADF only), Books Copying Method: Laser Electrophotography Fusing Method: Heat Roller Imaging Method: 1 Component Non Magnetic Dry Toner Contact Developing Resolution: Max. 600 dpi Operation Panel: LCD Display Copy Size: Legal - Letter via Paper Tray / Legal - Invoice via Sheet Bypass Void Area: Max. 0.2″ (5 mm) Warm Up Time: Approx.
Specifications ■ Network Scanner (Standard) Scanning Type: Scanning Speed: (w/o Transmission Time) Resolution (dpi/Monochrome): Resolution (dpi/Color): Max Scanning Area (Platen): Max Scanning Area (ADF): Duplex Scan: Scanning Mode: Scale: Compression Format: CCD Image Sensor (ADF/Platen) Monochrome: 2.7 sec. (Letter) Color: 11 sec. (Letter) Standard (150x150) / Fine (300x300) / SuperFine (600x600) Standard (75x75) / Fine (150x150) / SuperFine (300x300) 8.5 x 11.69" 8.
Appendix Options and Supplies ■ Options Part Name Part No.
IMPORTANT INFORMATION When requesting information, supplies or service always refer to the model and serial number of your machine. The model and serial number plate (Main Name Plate) is located on the rear side of machine. For your convenience, space is provided below to record information you may need in the future. Model No. Serial No.
Appendix Energy Star As an ENERGY STAR® Partner, Panasonic has determined that this product meets the ENERGY STAR® guidelines for energy efficiency. This voluntary program specifies certain energy consumption and usage standards. This product will automatically “power down” after a specified period of non-use. The use of this ENERGY STAR® compliant product will reduce energy consumption and ultimately benefit the environment. The default functions can be adjusted depending on your office requirements.
USA Only WARRANTY PANASONIC DIGITAL DOCUMENT COMPANY MAKES NO WARRANTIES, GUARANTEES OR REPRESENTATIONS, EXPRESSED OR IMPLIED, TO CUSTOMER WITH RESPECT TO THIS PANASONIC MACHINE, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
