Datasheet
FIBER
SENSORS
LASER
SENSORS
PHOTO-
ELECTRIC
SENSORS
MICRO
PHOTO-
ELECTRIC
SENSORS
AREA
SENSORS
SAFETY
COMPONENTS
PRESSURE
SENSORS
INDUCTIVE
PROXIMITY
SENSORS
PARTICULAR
USE
SENSORS
SENSOR
OPTIONS
WIRE-
SAVING
SYSTEMS
MEASURE-
MENT
SENSORS
STATIC
CONTROL
DEVICES
LASER
MARKERS
Selection
Guide
Digital
Display
DP4
DP-100
DP-M
DP5 / DPH
Head-
separated
Other
Products
DP-100
Digital
Display
601
Dual Display Digital Pressure Sensor DP-100 SERIES
PRESSURE
SENSORS
SPECIFICATIONS
Notes: 1) Where measurement conditions have not been specied precisely, the conditions used were an ambient temperature of +20 °C +68 °F.
2)
Model Nos. of Asia type having the sux “-M” are short pressure port type. Model Nos. of North America type having the sux “-P” are PNP output type.
Type
Standard Multi-function
For low pressure For high pressure For low pressure For high pressure
Model No.
Asia (Note 2)
DP-101(-M) DP-102(-M) DP-101A(-M) DP-102A(-M)
Europe DP-101-E-P DP-102-E-P DP-101A-E-P DP-102A-E-P
M8 plug-in connector type
DP-111-E-P-J DP-112-E-P-J DP-111A-E-P-J DP-112A-E-P-J
Item
North America (Note 2)
DP-101-N(-P) DP-102-N(-P) DP-101A-N(-P) DP-102A-N(-P)
Type of pressure Gauge pressure
Rated pressure range –100.0 to +100.0 kPa –0.100 to +1.000 MPa –100.0 to +100.0 kPa –0.100 to +1.000 MPa
Set pressure range
–100.0 to +100.0 kPa
–1.020 to +1.020 kgf/cm
2
–1.000 to +1.000 bar
–14.50 to +14.50 psi
–750 to +750 mmHg
–29.5 to +29.5 inHg
–0.100 to +1.000 MPa
–100 to +1,000 kPa
–1.02 to +10.20 kgf/cm
2
–1.00 to +10.00 bar
–14.6 to +145.0 psi
–100.0 to +100.0 kPa
–1.020 to +1.020 kgf/cm
2
–1.000 to +1.000 bar
–14.50 to +14.50 psi
–750 to +750 mmHg
–29.5 to +29.5 inHg
–0.100 to +1.000 MPa
–100 to +1,000 kPa
–1.02 to +10.20 kgf/cm
2
–1.00 to +10.00 bar
–14.6 to +145.0 psi
Pressure withstandability 500 kPa 1.5 MPa 500 kPa 1.5 MPa
Applicable uid Non-corrosive gas
Selectable unit For low pressure: kPa, kgf/cm
2
, bar, psi, mmHg, inHg, For high pressure: MPa, kPa, kgf/cm
2
, bar, psi
Supply voltage 12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Power consumption
Normal operation: 840 mW or less (Current consumption 35 mA or less at 24 V supply voltage)
ECO mode: 600 mW or less at STD (Current consumption 25 mA or less at 24 V supply voltage)
480 mW or less at FULL (Current consumption 20 mA or less at 24 V supply voltage)
Comparative output
<Asia, North America (NPN output)>
NPN open-collector transistor
Maximum sink current: 100 mA
Applied voltage: 30 V DC or less (between comparative output and 0 V)
Residual voltage: 2 V or less (at 100 mA sink current)
•
•
•
<Europe, North America (PNP output)>
PNP open-collector transistor
Maximum source current: 100 mA
Applied voltage: 30 V DC or less (between comparative output and +V)
Residual voltage: 2 V or less (at 100 mA source current)
•
•
•
Output operation / Output modes
NO / NC (selectable by key operation) / EASY mode / Hysteresis mode / Window comparator mode
Hysteresis Minimum 1 digit (variable) (however, 2 digits when using psi unit)
Repeatability ±0.1 % F.S. (within ±2 digits) ±0.2 % F.S. (within ±2 digits) ±0.1 % F.S. (within ±2 digits) ±0.2 % F.S. (within ±2 digits)
Response time
2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Short-circuit protection
Incorporated
External input
Auto-reference function /
Remote zero-adjustment
function
–
<Asia, North America (NPN output)>
ON voltage: 0.4 V DC or less
OFF voltage: 5 to 30 V DC, or open
Input impedance: 10 kΩ approx.
Input time: 1 ms or more
<Europe, North America (PNP output)>
ON voltage: 5 V to +V DC
OFF voltage: 0.6 V DC or less, or open
Input impedance: 10 kΩ approx.
Input time: 1 ms or more
Analog voltage output
–
Output voltage: 1 to 5 V DC
Zero point: within 3 V ± 5 % F.S.
Span: within 4 V ± 5 % F.S.
Linearity: within ±1 % F.S.
Output impedance: 1 kΩ approx.
Output voltage: 0.6 to 5 V
Zero point: within 1 V ± 5 % F.S.
Span: within 4.4 V ± 5 % F.S.
Linearity: within ±1 % F.S.
Output impedance: 1 kΩ approx.
Display
4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Displayable pressure
range
–100.0 to +100.0 kPa
–1.020 to +1.020 kgf/cm
2
–1.000 to +1.000 bar
–14.50 to +14.50 psi
–750 to +750 mmHg
–29.5 to +29.5 inHg
–0.100 to +1.000 MPa
–100 to +1,000 kPa
–1.02 to +10.20 kgf/cm
2
–1.00 to +10.00 bar
–14.6 to +145.0 psi
–100.0 to +100.0 kPa
–1.020 to +1.020 kgf/cm
2
–1.000 to +1.000 bar
–14.50 to +14.50 psi
–750 to +750 mmHg
–29.5 to +29.5 inHg
–0.100 to +1.000 MPa
–100 to +1,000 kPa
–1.02 to +10.20 kgf/cm
2
–1.00 to +10.00 bar
–14.6 to +145.0 psi
Indicator
Orange LED
Comparative output 1 operation indicator, comparative output 2 operation indicator:
Lights up when each comparative output is ON
Orange LED
Comparative output 1 operation indicator: Lights up when comparative output is ON,
Analog voltage output operation indicator: Lights up when setting
Environmental resistance
Protection IP40 (IEC) (Refer to p.1001 for details of standards.)
Ambient temperature –10 to +50 °C +14 to +122 °F, Storage: –10 to +60 °C +14 to +140 °F (No dew condensation or icing allowed)
Ambient humidity 35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability 1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance 50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance
10 to 500 Hz frequency, 3 mm 0.118 in amplitude, in X, Y and Z directions for two hours each
(when panel is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude, in X, Y and Z directions for two hours each)
Shock resistance 100 m/s
2
acceleration (10 G approx.) in X, Y and Z directions for three times each
Temperature characteristics
Within ±0.5 % F.S. (at +20 °C +68 °F)
Within ±1 % F.S. (at +20 °C +68 °F)
Within ±0.5 % F.S. (at +20 °C +68 °F)
Within ±1 % F.S. (at +20 °C +68 °F)
Pressure port
Asia: M5 female thread + R (PT) 1/8 male thread (excluding DP-10□-M), Europe: M5 female thread + G 1/8 male thread, North America: M5 female thread + NPT 1/8 male thread
Material
Enclosure: PBT (glass ber reinforced), LCD display: Acrylic, Pressure port: Brass (nickel plated)[Asia, DP-□-J: Stainless steel (SUS)] ,
Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
Connecting method / Cable length
Connector / Total length up to 100 m 328.084 ft (less than 10 m 32.808 ft when conforming to CE marking) is possible with 0.3 mm
2
, or more, cable.
Weight Net weight: 40 g approx. (DP-10□-M: 30 g approx.), Gross weight: 135 g approx. (DP-10□-M: 125 g approx.)
Accessories CN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1pc. (Excluding M8 plug-in connector type)