Datasheet

8
Installation is also easy!
Tight installation to panels is possible
An exclusive mounting bracket that is suitable for 1 to 6 mm 0.039
to 0.236 in panel thickness is available.
Short pressure port type is lightweight and takes up little space
Space saving!
Compact size with a depth of only 30 mm 1.181 in, so that it can
easily fit into narrow spaces.
Light weight of 30 g! *
10 g lighter than standard types. This reduces the loads on movable
parts such as robot arms.
Ideal for clean environments!
Stainless steel (SUS303) which does not rust or generate gas is
used as the port material.
Space savings can also be achieved even when an L-shaped mounting bracket is used.
Front protection
cover available
MS-DP1-3
Ceiling mounting Floor mounting Rear mounting
Neat and
space
saving
Positioning bosses for easier
mounting bracket installation
* Excluding cables with connector attached
A single mounting hole!
Tight installation is possible
Tight installation is possible
Ɣ An exclusive mounting bracket that supports tight installation is available
Standard type
Short pressure port type
Shortened to
12.5 mm 0.492 in !
Light weight
30g approx.
Shortened to
12.5 mm 0.492 in !
Light weight
30g approx.
Elbow joint
Short pressure
port type DP-10Ƒ-M
30 mm
1.181 in
* The illustration shows connection using an elbow joint. The elbow joint is sold separately.
M5 female thread+R
1
8
male thread
M5 female thread [Material: Stainless steel (SUS)]
 MS-DP1-1  MS-DP1-5