Datasheet

DP-100
10
Connector attached cable
&1$&Ƒ
&1$5&Ƒ
Panel mounting bracket, Front protection cover
MS-DP1-2
MS-DP1-3
Flat attachment
MS-DP1-FM MS-DP1-FR
MS-DP1-FN
MS-DP1-FE
MS-DP1-4
Recommended connector
Contact: SPHD-001T-P0.5, Housing: PAP-04V-S
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
Recommended crimping tool
Model No.: YC-610R
(Manufactured by J.S.T. Mfg. Co., Ltd.)
Note: Contact the manufacturer for details of the recommended products.
OPTIONS
M8 connector attached cable
&1$&Ƒ
MS-DP1-5
ø9
ø0.354
(Unit: mm in)
31.4
1.236
ø4
ø0.157
Note: The connector attached cable CN-14A-C2 is supplied with the DP-100 series.
(Excluding M8 plug-in connector type).
Sensor mounting bracket
MS-DP1-1
Conversion bushing
MS-DP1-7
Sensor mounting
bracNet
MS-DP1-1
M3 (length 6 mm 0.236 in)
screws with washers
Accessory for
MS-DP1-1
()
Front protection cover
MS-DP1-3
Panel mounting bracNet
MS-DP1-2
DP-100
Panel mounting bracNet MS-DP1-4
DP2
-2
0
ñ101.3
k
P
a
OU
T2OU
T
1
MODE
0-A
D
J
DP2 / DP3
Insert
Remove
Remove
Mounting holes
for DP2 / DP3 series
can be used as is.
Front protection cover
DPX-04 (optional)
can be installed on
MS-DP1-4.
Sensor mounting
bracNet
MS-DP1-5
M3 (length 6 mm 0.236 in)
screws with washers
Accessory for
MS-DP1-5
()
MS-DP1-FM 15g approx.
MS-DP1-FR/FN/FE 25g approx.
Net weight:
Two M3 (length 8 mm 0.315 in) screws,
two M4 (length 20 mm 0.787 in) screws are attached.
Conversion bushing
MS-DP1-7
M5 female
thread
Rc
1
/8 female
thread
Connector
attached cable
Connector
attached cable
(Flexible cable)
M8 connector
attached cable
Connector
Panel mounting
bracNet
Front protection
cover
Conversion
bushing
Flat
attachment
Sensor
mounting
bracNet
Length: 1 m 3.281 ft
Length: 2 m 6.562 ft
Length: 3 m 9.843 ft
Length: 5 m 16.404 ft
Length: 1 m 3.281 ft
Length: 2 m 6.562 ft
Length: 3 m 9.843 ft
Length: 5 m 16.404 ft
Length: 2 m 6.562 ft
Length: 5 m 16.404 ft
Set of 10 housings and 40 contacts
Model No.Designation Description
CN-14A-C1
CN-14A-C2
(Note)
CN-14A-C3
CN-14A-C5
CN-14A-R-C1
CN-14A-R-C2
CN-14A-R-C3
CN-14A-R-C5
CN-24A-C2
CN-24A-C5
CN-14A
MS-DP1-1
MS-DP1-5
MS-DP1-2
MS-DP1-4
MS-DP1-3
MS-DP1-7
MS-DP1-FM
MS-DP1-FR
MS-DP1-FN
MS-DP1-FE
0.2 mm
2
4-core cabtyre cable with
connector on one end
Cable outer diameter:
ø 3.7 mm ø 0.146 in
0.2 mm
2
4-core flexible cabtyre cable
with connector on one end
Cable outer diameter:
ø 3.7 mm ø 0.146 in
For M8 plug-in connector type
The connector on one end
Cable outer diameter: ø4 mm ø0.157 in
Allows sensors to be installed on the flooring or ceiling.
Multiple sensors can also be mounted closely.
Allows sensors to be installed on the wall. Multiple sensors
can also be mounted closely.
Allows installation to panels with thicNness of 1 to 6 mm 0.039
to 0.236 in. Multiple sensors can also be mounted closely.
Allows replacement from DP2 / DP3 series to DP-100 series. For newly designed
set-up, please use panel mounting bracNet MS-DP1-2 for panel mounting.
Protects the adjustment surfaces of sensors.
(Can be attached when using the panel mounting bracNet)
Pressure port and cable can now be
pulled out in downward, left or right
directions. Flat mounting on surfaces
such as the wall is made possible.
By equipping with DP-10 Ƒ -M(-P), pressure port can be converted to
Rc
1
/8 female thread. Replacement from DP2 / DP3 series is possible.
M5 female thread
Rc
1
/8 female thread
NPT
1
/8 female thread
G
1
/8 female thread