Datasheet
8
Installation is also easy!
Cable can be connected with one-touch connection
The accessory connector attached cable (2 m 6.562 ft) can be
connected easily with one-touch connection.
Tight installation to panels is possible
An exclusive mounting bracket that is suitable for 1 to 6 mm 0.039 to
0.236 in panel thickness is available.
● Types without connector attached
cable are also available
Commercially-available connectors can be used for cable
connections. Only the required length of cable needs to be used,
which contributes to a reduced amount of wastage for unneeded
cable.
Space savings can also be obtained if an L-shaped mounting
bracket is used.
Connection cable
m
Front protection
cover available
MS-DP1-3
DP-10-J
Ceiling mounting Floor mounting
Environmentally
friendly
Takes up
much
less space
Positioning bosses for easier
mounting bracket installation
m Options: 1 m 3.281 ft / 3 m 9.843 ft / 5 m 16.404 ft
types are also available.
A single mounting hole!
Commercially-available
parts can be used!
Commercially-available
parts can be used!
Tight installation is possible
Tight installation is possible
● An exclusive mounting bracket (MS-DP1-1) that supports tight installation is available
10/2006