For gas Digital Pressure Sensor DP-0 SERIES Conforming to EMC Directive Simpler and Easier to Use 2015.06 panasonic.
DP-0 Simple & Easy Operation Two levels of setting mode for easy operation of essential functions The “RUN mode” is for threshold value setting, zero point adjustment and key lock setting / release setting, and the “detailed setting mode” allows for basic settings for sensor operation. The two-level setting mode configuration enables easy and immediate use of the product.
DP-0 Simp le DP-0 Redesigned for improvement of pressure sensor usability from ground up Eas y Setti ng High-Quality LCD Display Pressure / setting display Simple and highly visible display Comparative output ON / OFF mark Key lock mark OVER mark Pressure unit display Low pressure type: kPa, kgf/cm2, bar, psi, mmHg High pressure type: MPa, kgf/cm2, bar, psi RUN mode Detailed setting mode The LCD offers a wide viewing angle so the display is easy to see even from an oblique angle.
DP-0 High pressure type Low pressure type Low Pressure Type and High Pressure Type Available Two types to choose from according to applications Applications The low pressure type can be used with positive or negative pressure, while the high pressure type is suitable for positive pressure of up to 1 MPa. Suction confirmation for electronic parts Reference pressure check Ideal for applications such as suction. No misoperations due to vacuum breakdown occur.
DP-0 Designed for Easy Installation Tight installation is possible Panel mounting bracket An exclusive mounting bracket that is suitable for 1 to 3 mm 0.039 to 0.118 in panel thickness is available. Panel mounting bracket MS-DP1-8 Neat and space saving Front protection cover MS-DP1-3 Tight insta llation is Exclusive mounting bracket possible A single mounting hole Supports tight installation MS-DP1-1 M3 (length 6 mm 0.
DP-0 ORDER GUIDE Model No. DP-00 1 - P - J Rated pressure range Cable 1 : −100.0 to +100.0 kPa (Low pressure type) 2 : 0.000 to +1.000 MPa (High pressure type) None : Connector attached cable 2 m 6.562 ft J : Type without connector attached cable Comparative output None : NPN output type P : PNP output type Type Appearance Rated pressure range Low pressure type High pressure type −100.0 to +100.0 kPa *CN-14A-C2 (Connector attached cable 2 m 6.562 ft ) is attached. 0.000 to +1.
DP-0 SPECIFICATIONS Model No. Type Item Low pressure High pressure NPN output DP-001 DP-002 PNP output DP-001-P DP-002-P Type of pressure Rated pressure range Set pressure range Pressure withstandability Gauge pressure −100.0 to +100.0 kPa 0.000 to +1.000 MPa −101.0 to +101.0 kPa −1.030 to +1.030 kgf/cm2 −1.010 to + 1.010 bar −14.65 to +14.65 psi −756 to +756 mmHg −0.010 to +1.010 MPa −0.1 to +10.30 kgf/cm2 −0.1 to + 10.10 bar −0.1 to +146.5 psi 500 kPa 1.
DP-0 I/O CIRCUIT AND WIRING DIAGRAMS NPN output type I/O circuit diagram Terminal arrangement diagram Terminal No. Color code of connector attached cable (Brown) +V 1 Sensor circuit D1 3 D2 Tr 2 (White) Not connected (Note) Load (Black) Comparative output + − 50 mA MAX. ZD 2 3 4 Terminal No. (Blue) 0 V 4 Internal circuit 1 12 to 24 V DC ±10 % Designation Users’ circuit +V Note: Open or, connect to 0 V.
DP-0 PRECAUTIONS FOR PROPER USE • Never use this product as a sensing device for personnel protection. • In case of using sensing devices for personnel protection, use products which meet laws and standards, such as OSHA, ANSI or IEC etc., for personnel protection applicable in each region or country. • This product is used for noncorrosive gas. The product shall not be used for liquid or corrosive gas. Never use fluids having inflammability, toxicity, etc., that affect the human body, either.
DP-0 DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. DP-00□ Sensor 24.9 0.980 30 1.181 20 0.787 Connector 20 0.787 4.9 0.193 Display 30 1.181 ø8.35 ø0.329 Setting value DOWN key Mode selection key 2-ø2.5 0.098, 5 0.197 deep 20 0.787 M5 female thread, 4 0.157 deep 1.3 0.051 2-M3 female thread, 4 0.157 deep Setting value UP key MS-DP1-1 Sensor mounting bracket (Optional) ø2.3 ø0.091 22 0.866 9.5 14.5 0.571 0.374 2-R2.1 R0.083 1 0.039 4.2 0.165 21 0.827 30 1.
DP-0 DIMENSIONS (Unit: mm in) The CAD data can be downloaded from the website. MS-DP1-8 MS-DP1-3 Panel mounting bracket (Optional), Front protection cover (Optional) Mounting drawing with DP-00□ Panel cut-out dimensions When 1 unit is installed 0 31−0.4 0 1.220 −0.016 0 0 31−0.4 1.220 −0.016 (39.3 1.547) 34.5 1.358 Front protection cover 11 0.433 7.2 12.8 0.283 0.504 4.9 0.193 ø8.35 ø0.329 ( ) 34.5 20 1.358 0.
Pressure Sensor Lineup Higher precision, more advanced function Dual Display Digital Pressure Sensor DP-100 SERIES Ver.2 Conforming to EMC Directive Certification of Recognition Certification [DP-101 (A) / 102 (A) only] Detection of liquid pressure Head-separated Dual display Digital Pressure Sensor For gas •• Dual-screen 3-color display (red, green, orange) for added ease of operation. •• Wide variation of pressure ports. •• Provided with 2 outputs (standard type).
