Operating instructions

27
VQT4W64
Advanced
operations
Advanced timer recording [HDD]
1 Press [PROG/CHECK].
2 Press [3, 4] to select “New Timer
Programme” and press [OK].
3 Press [2, 1] to move through the
items and change the items with
[3, 4].
≥When “Channel” is selected, you can press the “Blue” button
to change the category [e.g., All Channels, TV, Radio,
Analogue ([DVB-C]), Favourite (> 64)] and then press
[3, 4] to select the channel you want to record.
≥Press and hold [3, 4] to alter the Start (Start time) and Stop
(Finish time) in 30-minute increments.
≥You can also set Channel (Programme position/TV Station
Name), Date, Start (Start time), and Stop (Finish time) with
the numbered buttons.
≥Date
Titles recorded using the same daily, weekly or series timer
are bundled and displayed as a “group” in the
DIRECT NAVIGATOR screen (> 34) except when using
Auto Renewal Recording.
≥The recording drive is fixed to HDD.
≥You can also press [REC MODE] to change the recording
mode.
≥RENEW (Auto Renewal Recording) (> 28)
ON!)OFF
≥Programme Name
Press [2, 1] to select “Programme Name” and press [OK].
(> 50, Entering text)
≥STTL (Subtitles) (Digital broadcast only)
AUTO!)OFF
When the “Channel” column is set in AV1 or AV2, this setting is
unavailable.
You can also press [STTL ] to switch “STTL” setting.
When there are multiple languages, select the subtitle
(> 66, DVB Preferred Language).
4 Press [OK].
The timer programme is stored and the timer icon is
displayed.
“F” lights on the unit’s display to indicate timer recording
standby has been activated.
Repeat steps 2–4 to programme other recordings.
Press [Í] to turn the unit off.
≥Even when the unit is turned off, you can display the timer
recording list by pressing [PROG/CHECK].
Press [PROG/CHECK].
A Icons
B Message displayed in the “Drive space” line
C Channel name, programme name and other
information are displayed.
∫ To change a programme
Press [3, 4] to select the programme and press [OK]. (> left,
step 3)
∫ To delete a programme
Press [3, 4] to select the programme and press [DELETE ¢].
You can also delete a programme with the following steps
1 Press [3, 4] to select the programme and press [OPTION].
2 Press [3, 4] to select “Delete” and press [OK].
∫ To release the unit from recording standby
Press [3, 4] to select the programme and press the “Red”
button.
≥The timer icon “F” disappears from the timer recording list.
≥You cannot cancel timer recording standby mode as long as even
one timer icon “F” remains in the timer recording list.
≥Press the “Red” button again to activate timer recording standby.
∫ To resolve overlapping
Press [3, 4] to select the programme with and press [OK].
≥If the “Overlapped Timer Recording” screen appears (> 28)
≥If the on-screen instructions do not appear, change or delete the
overlapped programme.
∫ To exit the timer recording list
Press [PROG/CHECK].
≥Programmes that failed to record are deleted from the timer
recording list at 4 a.m. two days later.
Manually programming timer
recordings
[.
l
l
l
l
a.
Date: Current date up to one month later minus
one day
;:
Daily timer: SUN-SAT>MON-SAT>MON-FRI
;:
Weekly timer: SUN>--->SAT
Timer
Recording
30:24 SP
HDDRemain
Mode StopStart Drive No. Date
STTL
Channel
Drive
space
New Timer Programme
TUE 11.10.11. 12:54:00
Timer
Recording
30:24 SP
HDDRemain
Mode
Stop DriveStart Channel Date
STTL
22:30 22:00 18. 10. TUE OFF
1 Das E
Programme Name
SP
All Channels : Das Erste
TUE 11.10.11. 12:54:00
HDD
No. Channel
ARD
01

Timer icon
0:24 SP
Mode Stop Drive
STTL
HDD
Drive
space
SP
OK
22:30
OFF
ogramme
TUE 14.10.09. 12:56:00
Check to make sure “OK” is
displayed (> right).
e.g.,
Check, change or delete a programme,
or resolve overlapping
F Timer recording standby is activated.
[ This programme is currently recording.
Programmes are overlapped. Recording of the programme
with the later start time starts when the earlier programme
finishes recording.
You stopped a daily, weekly or series timer recording (> 32).
The icon disappears the next time the timer programme starts
recording.
The programme was recording prohibited so it was not
recorded.
X The programme did not complete recording for some reason.
Timer programmes set to Auto Renewal Recording (> 28).
HDD Recording drive is set to HDD
OK: Displayed if the recording can fit in the remaining
space.
> (Date): For recordings made daily or weekly, the display will
show until when recordings can be made (up to a
maximum of one month from the present time) based
on the time remaining on HDD.
! : It may not be possible to record because:
≥there is not enough space left.
≥the number of possible titles has reached its
maximum.
≥programmes are overlapped.
≥programmes are deactivated.
Timer
Recording
30:24 SP
HDD
Remain
RETURN
OK
Press OK to store new programme.
Mode
STTL
Stop DriveStart No. DateChannel
Drive
space
New Timer Programme
TUE 11.10.11. 12:54:00
Note
DMREX96C-VQTXXXX_eng.book 27 ページ ２０１３年３月５日 火曜日 午後５時５１分