Operating instructions

73
VQT3C69
Reference
Additional connections
Reference
Connect to terminals of the same colour.
Connect to terminals of the same colour.
To enjoy multi-channel surround sound DVD-Video, connect an
amplifier with Dolby Digital, DTS and MPEG decoders.
“Digital Audio Output” in the Setup menu (> 68)
When this unit is connected to an amplifier with an optical digital
audio cable and connected to a television with an HDMI cable, you
can enjoy the highest quality of audio from the disc by setting
“Digital Audio Output” to “Optical Only” in the Setup menu (> 69).
In this case audio is only output from the amplifier not the
television.
Before purchasing an optical digital audio cable (not supplied),
check the terminal shape of the connected equipment.
You cannot use DTS Digital Surround decoders not suited to DVD.
Connecting a television with AUDIO/
VIDEO
Connecting a stereo amplifier
RF
IN
RF
OUT
L
AUDIO
VIDEO
L
R
OUT
AUDIO IN
R L
VIDEO
IN
This unit’s rear panel
Audio/Video cable
Television’s rear panel
RF
IN
RF
OUT
AUDIO
VIDEO
L
R
OUT
AUDIO IN
R L
Audio cable
This unit’s rear panel
Amplifiers rear panel
Connecting an amplifier with a digital
input terminal
Required setting
AV OUT
AV OUT
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(
PC
PC
M/
M/
BITSTREAM
BITSTREAM
)
OPTICAL
M
ON INTERFACE
M
ON INTERFACE
COMMON INTERFACE
OPTICAL IN
Optical digital audio
cable
Do not bend sharply
when connecting.
This unit’s rear panel
Insert fully, with
this side facing
up.
Amplifiers rear panel
Connecting a television and VCR, digital satellite receiver
§
Only when connecting digital satellite receiver with this unit
“AV2 Input” setting in the Setup menu (> 70)
Connect the unit directly to the television (> 6)
OUT
OUT
AV OUT
AV OUT
DIGITAL AUDIO OUT
DIGITAL AUDIO OUT
(
PC
PC
M/
M/
BITSTREAM
BITSTREAM
)
RF
IN
RF
OUT
VIDEO
AUDIO
R
L
AV1
(
TV
)
OPTICAL
AV2
(
EXT
)
AC IN
COMMON INTERFACE
COMMON INTERFACE
COMMON INTERFACE
1
3
AV
VHF/UHF
RF IN
VHF/UHF
RF IN
AV
6
RF OUT
7
5
2
AV
AV
4
To the terrestrial aerial
RF coaxial cable
This unit’s rear panel
To household mains socket
(AC 220 to 240 V, 50 Hz)
AC mains lead
(supplied)
Connect only after all
other connections are
complete.
21-pin Scart cable
RF coaxial cable
(supplied)
Cooling fan
Connecting a terminal
other than the 21-pin
Scart terminal
(> 7, above)
Television’s rear panel
VCR’s rear panel
Digital satellite
receivers rear panel
21-pin Scart
cable
Fully wired 21-pin Scart cable
Common Interface (CI) slot
Cable
Aerial cable/
CATV Coaxial
cable
Required setting
Setting menus
DMREX84C-VQT3C69_eng.book 73 ページ 2010年12月10日 金曜日 午後4時45分