Operating Instructions

92
VQT2J27
Troubleshooting Guide
Cannot switch audio.
¾ You cannot switch the audio in the following cases.
– When a DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL or +RW disc is in the disc tray while
DVD drive is selected.
– When the recording mode is XP and “Audio Mode for XP
Recording” is set to “LPCM”. (> 75)
¾ When recording a digital broadcast with multiple audio
channels, this unit will record only the audio channel
selected in “DVB Multi Audio” in the on-screen display. The
audio channel cannot be switched during playback. (> 69)
¾ You have used a digital connection. Set “Dolby Digital” to
“PCM” or connect using audio cables (analogue
connection). (> 75, 81)
¾ There are discs whose audio cannot be changed due to
how the disc was created.
Play fails to start even when [1] (PLAY) is pressed.
Play starts but then stops immediately.
¾ Insert the disc correctly with the label facing up. (> 82)
¾ The disc is dirty, scratched or marked. (> 82)
¾ You tried to play a blank disc or a disc that is unplayable on
the unit. (> 15, 16, 18)
¾ You tried to play a +RW that needs to be finalised on the
equipment used for recording.
¾ You may be able to copy a “One time only recording” title
that was recorded to DVD-RAM using a different Panasonic
DVD Recorder to this unit’s HDD, but play is not possible
due to copyright protection.
¾ When recording to DVD-RAM using EP ( 8 hours ) mode,
play may not be possible on DVD players that are
compatible with DVD-RAM. In this case use EP ( 6 hours )
mode. (> 74)
¾ You cannot play discs during DV automatic recording.
¾ If playing DivX VOD content, refer to the homepage where
you purchased it. (DivX) (> 39)
¾ Make sure that the TV is turned on. If the menu or
messages are displayed, follow the on-screen instructions.
Audio and video momentarily pause.
¾ This occurs between playlist chapters.
¾ This occurs between chapters and with partially deleted
titles on finalised DVD-R, DVD-R DL, DVD-RW (DVD-Video
format), +R, +R DL and +RW that have been copied using
the high speed mode.
¾ This occurs as scenes change during Quick View (Play
k1.3).
¾ [- R]DL ] [+R]DL] When playing a title recorded on both layers,
the unit automatically switches between layers and plays
the title in the same way as a normal programme. However,
video and audio may momentarily cut out when the unit is
switching layers. (> 15)
DVD-Video is not played.
¾ Ensure the DVD-Video region number for the disc is
correct, and the disc is not defective. (> Cover)
¾ You have set a ratings level to limit DVD-Video play.
Change this setting. (> 74)
Alternative soundtrack and subtitles cannot be
selected.
¾ The languages are not recorded on the disc.
¾ You may not be able to use the on-screen menus to change
the soundtrack and subtitles on some discs. Use the disc’s
menus to make changes. (> 20)
No subtitles.
¾ Subtitles are not recorded on the disc.
¾ Turn the subtitles on and select “Text” or the subtitle
number. (> 68)
Angle cannot be changed.
¾ This function depends on software availability. Angles can
only be changed during scenes where different angles are
recorded.
You have forgotten your ratings PIN.
¾ With the tray open, press [DRIVE SELECT] to select the
DVD drive, then press and hold [¥ REC] and [1](PLAY/
a1.3) on the main unit simultaneously for about 5 or more
seconds.
Quick View (Play k1.3) does not work.
¾ This does not work when audio is other than Dolby Digital.
¾ This does not work while recording in XP or FR mode.
The resume play function does not work.
¾ Memorized positions are cancelled when
–press [∫] several times.
– open the disc tray.
– [CD] [VCD] [USB] turn off the unit.
– execute a recording or timer recording.
Playback Issues: Sound (Continued)
Playback Issues: Operation
DMR-EX83EB_VQT2J27-B.book 92 ページ ２０１０年１月１３日 水曜日 午前９時５３分