Operating instructions

66
FUNCTION MENU
Setup
To Others
On
Clock
Automatic
Please set the clock.
OK : access RETURN : leave
OK
CHANGE
RETURN
Time
Date
10 52 04 20 3 2007: : . .
TAB
SELECT
RETURN
DivX ( R ) Video on Demand
DivX Registration
Your registration code is : XXXXXXXX
To learn more visit www.divx.com/vod
Setup
Connection
Others
Tuning
Disc
Picture
Sound
Display
Remote Control
Clock
Power Save
Quick Start
DivX Registration
System Update
Initialize
DVD 1
Off
On
Options
Settings
Others
OK
OK
Off
Clock
Automatic
OK
CHANGE
RETURN
Time
Date
0 00 00
1 1 2007: : . .
0
- -
9
SELECT
Number
Clock cannot be set automatically.
Please set the clock manually.
OK : store RETURN : leave
Quick Start [On] [Off]
When a television is connected via the 21-pin Scart, COMPONENT VIDEO,
VIDEO or S VIDEO terminals.
On: The unit switches on from Standby mode in approx. 1 second. In Standby
mode, more power is used and Power Save is set to [Off].
Activate the automatic time adjustment
The precise time is adjusted automatically if the DVD Recorder is set to a station
that transmits a time signal.
!
Set Automatic to [On] with and confirm with OK.
Automatic time adjustment now begins.
This DVD Recorder has a 24-clock time setting.
In the case of a power failure, an automatic standby system saves the time for max.
60 minutes. If the Automatic setting has been adjusted to [On], the function checks
and corrects the time several times a day. This function only works when the DVD
Recorder is in standby mode. This function is not possible in the timer recording
mode. Please pay attention to summer and winter time.
In the case of a weak reception signal for example, it is possible that the automatic
time adjustment does not work. In this case, the Automatic setting goes to [Off].
Automatic time adjustment is now deactivated.
If the reception signal improves later on, the Automatic setting can be adjusted back
to [On] again.
DivX Registration
In order to play purchased or borrowed DivX files on this unit, you need the
individual DivX code for this unit. The code is display here. Please make a note of
the code.
Power Save [On] [Off]
On: Power Save feature in Standby mode.
The brightness of the display field cannot be changed in the Power Save mode.
The Quick Start is set to [Off]. If you want to connect an external unit via the AV2
Scart terminal, the DVD Recorder must be switched back on from the Standby
mode.
Off: The brightness of the display field can be changed.
Clock
The Time and Date are normally adjusted precisely during the Auto-Setup.
However, under certain circumstances it is possible that the DVD Recorder does
not automatically adopt the time and date. In this case, you can set time and date
manually.
!
Set Automatic to [Off] with and confirm with OK.
!
Use and to change the Time and Date.
!
Confirm the settings with OK.
Remote Control [DVD 1] [DVD 2] [DVD 3]
If you are also using another Panasonic unit at the same time, change the mode for
the remote control. 6