Operating instructions

63
FUNCTION MENU
Setup
To Others
TAB
SELECT
RETURN
OK
TAB
SELECT
RETURN
Dolby Digital
OK
RETURN
SELECT
Setup
Display
Connection
Others
Tuning
Disc
Picture
Sound
Setup
Display
Connection
Others
Tuning
Disc
Picture
Sound
Setup
Connection
Others
Tuning
Disc
Picture
Sound
Display
Dynamic Range Compression
Bilingual Audio Selection
Digital Audio Output
Audio Mode for XP Recording
Dolby Digital
Audio Mode for DV Input
Stereo 1
PCM Down Conversion
MPEG
Dolby Digital
Digital Audio Output
DTS
Bitstream
PCM
Language
On-Screen Messages
FL Display
Off
M1
PCM
Off
Bitstream
Bitstream
German
5 sec.
Bright
Options
Settings
Sound
OK
OK
Options
Settings
Display
OK
OK
Bilingual Audio Selection [M 1] [M 2]
To record programmes broadcast in dual channel sound, you can choose between
the original language [M1] or another available language [M2]. If you are copying
from another external source, select the soundtrack on the other unit.
Select the corresponding setting if you have connected an external unit to the
DIGITAL AUDIO OUT of the DVD Recorder.
PCM Down Conversion [On] [Off]
Select the audio output mode for a sample rate of 96 kHz or 88.2 kHz.
Despite this setting, signals are converted to 48 kHz or 44.1 kHz if they have a
sample rate of more than 96 kHz or 88.2 kHz or the disc is copy-protected.
On: The connected unit cannot process signals with a sample rate of 96 kHz
or 88.2 kHz. Signals are converted to 48 kHz or 44.1 kHz.
Off: The connected unit can process signals with a sample rate of 96 kHz or 88.2
kHz. Signals are output with 96 kHz or 88.2 kHz.
Dolby Digital, DTS, MPEG [Bitstream] [PCM]
Bitstream: The connected unit can decode the corresponding signal.
PCM: If the connected unit cannot decode the corresponding signal, the setting
must be changed to [PCM]. Otherwise the loud noise can damage your hearing
or loudspeakers. Make the necessary changes according to your audio system.
DVD-V
Audio Mode for DV Input [Stereo 1] [Stereo 2] [Mix]
Choice of audio type when recording from the DV input.
Stereo 1: Original sound Stereo 2: Voice-over Mix: Original sound + voice-over
Dynamic Range Compression [On] [Off] (only Dolby Digital)
On: The volume for quiet passages is increased and the volume for loud passages
is decreased. The sound can be clearly understood even when the volume is
lowered.
Digital Audio Output
Audio Mode for XP Recording [Dolby Digital] [LPCM]
Choice of audio type when recording in XP mode. The picture quality of LPCM
recordings may be poorer than normal recordings in XP mode.
-R
+R
-RW(V)
+R DL
-R DL
+RW
-R
+R
-RW(V)
+R DL
-R DL
+RW
On-Screen Messages [Off] [3, 5, 7, 10 sec.]
Select the display time for screen flashes.
Off: Screen flashes are not shown on changing the station.
FL Display [Bright] [Dim] [Automatic]
Dim: Changes the brightness of the display on the unit.
Automatic: This setting reduces power consumption in standby mode. The display
is dark during replay. Press any key to light up the display again. The display goes
off when the unit is switched off.
Language [English] [German]
Select the menu language.