Operating instructions

59
FUNCTION MENU
Satellite
Configuration
LNB C
LNB D
DiSEqC/LNBs
LNB A
LNB B
2
LNB A
Auto
Satellite
Configuration
LNB C
13 / 18V
Satellite: No
Delete Satellite
Satellite
Configuration
LNB B
LNB C
LNB D
DiSEqC/LNBs
Add Satellite
LNB Freq. Low Universal
LNB Freq. High
Universal
Satellite: Astra 19.2° E
Delete Satellite
Do you really want to
delete this satellite?
Yes
LNB D
Start scan?
Yes
No
Store this satellite?
Yes
No
No
Setup
Disc
Picture
Audio
Display
Anschluss
Sonstige
Tuning
Advanced Setup
SELECT
OK
LNB B
LNB C
1
LNB A
Auto
Number of LNBs
DiSEqC
Satellite
Configuration
Switching Voltage
13 / 18V
LNB D
DiSEqC/LNBs
DiSEqC/LNBs
Satellite Configuration
Add Transponder / Service
Delete Transponder
Switching Voltage
Number of LNBs
DiSEqC
Add Satellite
LNB Freq. Low Universal
LNB Freq. High
Universal
Setup
To Others
Satellite Configuration
Advanced Setup
Tuning
OK
OK
In Advanced Setup, you can set up additional satellites and make adjustments
to your satellite system.
To receive several satellites with one dish, e.g. Astra 19.2° E and Hot Bird 13° E, you
need a Multifeed dish combined with a DiSEqC switch between the receiver of your dish
(LNB) and the DVD Recorder.
Your dish must be equipped with two offset universal LNBs.
DiSEqC [Auto] [Mini DiSEqC] [DiSEqC] [No]
Auto: Automatic search for LNB and DiSEqC switch.
Mini DiSEqC: 1 to 2 LNBs
DiSEqC: 1 to 4 LNBs
No: Single LNB
Number of LNBs [1] [2] [3] [4]
One LNB is default (LNB A).
You need one LNB for each satellite you want to receive.
If you are not using a universal LNB, enter the corresponding LNB frequencies for
[LNB Freq. Low] and [LNB Freq. High].
LNB Freq. Low [9750 MHz (Universal), 10000 MHz, 10250 MHz]
[10600 MHz, 10750 MHz, ----- MHz (User Def.)]
LNB Freq. High [9750 MHz, 10000 MHz, 10250 MHz,]
[10600 MHz (Universal), 10750 MHz, ----- MHz (User Def.)]
The LNB converts the signals from the satellite into a corresponding frequency
range for the DVBS receiver. The standard setting for LNB Freq. Low is
[9750 MHz (Universal)], for LNB Freq. High: [10600 MHz (Universal)].
!
Select [DiSEqC] with and confirm with OK.
!
Select the required setting with and confirm with OK.
!
Select [Number of LNBs] with and confirm with OK.
!
Select the required quantity with and confirm with OK.
!
Select [Switching Voltage] with and confirm with OK.
!
Select [Add Satellite] with , and confirm with OK.
!
To start searching for the satellite receivable with this LNB, confirm [Yes] with OK.
!
To store this satellite, confirm [Yes] with OK.
The search for TV and radio stations begins.
Add Satellite
DiSEqC/LNB
Switching Voltage [13 / 18 V] [14 / 19 V]
Voltage for horizontal and vertical polarisation switching.
13 / 18 V: Standard setting
14 / 19 V: The voltage can be increased to 14 / 19 V for long cable distances.
Delete Satellite
!
Select the required LNB with .
!
Select [Delete Satellite] with and confirm with OK.
!
To delete the satellite, confirm [Yes] with OK.
The satellite is deleted. Deleting the satellite and corresponding stations can take
some time.
Together with the satellite, the EPG data are also deleted.
LNB B
LNB A