Operating instructions

47
FUNCTION MENU
Setup
Connection
Others
Tuning
Disc
Picture
Sound
Display
AV2 Input
AV2 Settings
Ext Link
Ext Link
OK
RETURN
SELECT
Ext Link 1
Ext Link 2
RGB / Video
Ext Link 2
You control the recording function via an external unit (e.g. a receiver) with EXT LINK.
Connect the external unit with a 21-pin Scart cable to the AV2 terminal.
Ext Link 1: for digital receivers sending a special recording control signal, e.g. the
F.U.N. receiver (TU-DSF41).
Ext Link 2: external recording control for satellite or digital receivers (video signal).
The Ext Link 2 cannot be used for an input signal in NTSC format.
!
Press FUNCTION MENU, select [To Others] with and press OK.
!
Select [Setup] with and press OK.
!
Select [Connection] with and [AV2 Settings] with and press OK.
!
Select [Ext Link] with and confirm with OK.
!
Select [Ext Link 1] or [Ext Link 2] with and confirm with OK.
!
Press EXIT to return to the television picture.
Switching off recording standby mode
!
disappears from the display.
Press EXT LINK to switch off the recording standby mode.
EXT-L
Switch the DVD Recorder to recording standby
!
Select the recording drive DVD or HDD with DRIVE SELECT.
!
Press EXT LINK.
Recording standby mode for EXT LINK controlled recordings is activated.
The display shows the selected drive and EXT-L.
The Timer Recording is programmed on the external unit. Please read the operating
instructions for the external unit.
Recording programming on the external unit
Prematurely stop recording
!
Stop the transfer of the recording signal on the external unit.
!
Press EXT LINK to switch off the recording standby mode.
isappears from the display.EXT-L d
Timer Recording via external units
Playback during EXT LINK on the selected drive
!
Press DIRECT NAVIGATOR.
!
Select the title with and press OK.
Playback starts.
!
Press STOP or DIRECT NAVIGATOR to stop playback.
!
Press RETURN or EXIT to leave the DIRECT NAVIGATOR.
Settings for external units (EXT LINK)
The recording begins on receiving an appropriate signal from the connected unit.
The selected drive records the video picture for as long as it is being transmitted by
the external unit.
The start of the recording may possibly not be recorded correctly.