Operating instructions

PROG/CHECK
45
HDD
DVD
Drive
space
Name Date Start Stop
OK
RETURN
No. Mode
DVD
Press OK to store new programme.
HDD
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 5. 3. MON
Delete
Timer Off
Stop Recording
Timer
Recording
New Timer Programme
02 ZDF 9. 3. FFI 20:45 21:30 SP OK
01 VOX 5. 3. MON 14:00 15:00 SP OK
DVD
DVD
Drive
space
Name Date Start Stop
No. Mode
DVD
HDD
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 5. 3. MON
Timer
Recording
New Timer Programme
01 VOX 5. 3. MON 14:00 15:00 SP OK
DVD
02 ZDF 9. 3. FRI 20:45 21:30 SP OK
DVD
[Chan. Name] ZDF
OK
RETURN
DELETE
Timer Off
OPTION
Checking or changing Timer Recordings
Check the settings and correct them if necessary.
!
Press PROG/CHECK.
!
Select the required Timer programming with and press OK.
!
Select the position that you want to change with and confirm with OK.
Programmes which are just being recorded cannot be changed.
OK The disc has sufficient memory space for the recording.
(Date) The available memory space is shown for daily or weekly recordings.
! No disc inserted, disc write protected or not enough memory space.
The unit switches automatically to HDD if the inserted DVD does not
have enough memory space for the programmed recording.
Relief
Drive space (DVD/HDD)
Delete
!
Select the required Timer programming with .
!
Press OPTION.
!
Select [Delete] and confirm with OK.
Programmes which are just being recorded cannot be deleted. Stop the recording
first.
You can also delete a Timer programming with DELETE Ü.
Timer Off/On
For regular e.g. weekly Timer programmings, you can suspend the recording if you
want to record another program at the same time. Your Timer programming is
retained. You do not have to delete it and reprogramme it again later.
The recording is suspended just once.
You can stop a current Timer Recording.
!
Select the current Timer Recording with .
!
Press OPTION.
!
Select [Stop Recording] and confirm with OK.
The one-off Timer Recording is finished and thereby deleted.
If you stop a regular Timer Recording (e.g. weekly recording), this is marked as
stopped and is not deleted.
Programming for following recordings is retained.
Stop Recording
A Timer programming can also be suspended or switched on using the submenu.
!
Select the required Timer programming with .
!
Press the Button to suspend the Timer programming or switch it on.Red
!
Select the required Timer programming with .
!
Press OPTION.
!
Select [Timer On] or [Timer Off] with and confirm with OK.
Red