Operating instructions

61
RQT9299
Tips
To return to the previous screen
Press [RETURN
].
To stop copying
Press [].
You can also press and hold [RETURN ] for 3 seconds to
stop copying.
 If stopped partway, copying will be up to that point.
Notes
 If you perform search, frame-by-frame
or pause while copying, that portion of
title is not recorded.
 The screen on the right is recorded at
the beginning.
 The content is recorded as 1 title from
the start of copy to the end.
 If play does not begin automatically or if the top menu
does not display automatically, press [] (PLAY) to start.

Even if you copy a high quality video/audio DVD, the original
picture and audio quality cannot be exactly replicated.
 If you want to copy a title from a finalised DVD-RW (DVD
Video Recording format), create a copy list and then copy
( 59, Copying using the copying list—Advanced Copy).
 Press [, ] to select “Hour” and “Min.”, then press [,
] to set the recording time.
 Press [OK].
 Press [] to confi rm.
Copying to the HDD continues for the set time even after
the content being played fi nishes.
– Set a few minutes longer than the source title, in order to
include the operation time before play begins.
–
You can also set the recording time with the numbered buttons .
 Press [  ,  ] to select “Start Copying”, then press [OK].
Press [] to select “Yes”, then press [OK] to start
copying. The disc top menu is displayed.
– Disc play automatically begins from title 1 when “Title 1” is
selected from the “Auto-Play Select” menu when fi nalising
the disc ( 69).
 When the top menu is displayed
Press [, , , ] to select the title you want to
start copying, then press [OK].
My favourite 01/02
01
Chapter 1
03
05
02
04
06
Chapter 2
Chapter 3 Chapter 4
While playing in order, all the titles after the selected title are
recorded until the set time. (After the last title on the disc has
fi nished playing the top menu is recorded until the set time is
reached.)
Copying SD Video from a video equipment
Motion pictures encoded in the MPEG2 format, which have
been taken by a Panasonic digital video camera with HDD etc,
can be copied from the camera’s HDD to this unit’s HDD or
DVD-RAM.
(All the recordings on the same date become a title.)
 You cannot playback SD Video in the camera’s HDD with this
unit.
You must copy the files to the HDD or a DVD-RAM.
 You cannot playback or record while copying SD Video.
HDD
DVD-RAM
SD Video
Video

DVD Video Recording format
USB cable
Preparation:
1 Turn on both this unit and the camera.
2 Connect the camera to this unit with USB cable.
3 Select the appropriate mode that makes the camera
ready for data transfer (such as “PC CONNECT”) on the
camera.

Refer to the camera’s operating instructions for detail.
The display below automatically appears when you connect
the camera to this unit.
Press [, ] to select “Copy Video (MPEG2)”, then
press [OK]. Then go to step  on page 59.
USB device
OK
RETURN
SELECT
Play Video ( DivX )
Copy Video ( MPEG2 )
Play Pictures ( JPEG )
Copy Pictures ( JPEG )
Play Music ( MP3&WMA )
Copy Music ( MP3&WMA )
Update CD database on HDD
Copy All Pictures ( JPEG )
 SD Video on the camera are automatically registered on
the copy list.
 If there are no SD Video on the camera, “Copy Video
(MPEG2)” is not displayed.
Advanced Editing
DMR-EX79EB.indb 61DMR-EX79EB.indb 61 2009/01/14 14:53:062009/01/14 14:53:06