Operating Instructions

71
RQT8860
You can delete analogue channels and set the analogue channel
details.
After performing steps 1–4 (➡ 69)
5 Press [3, 4] to select “Settings for
Analogue Services ” and press [OK].
6 Press [3, 4] to select “Manual
Tuning” and press [OK].
To delete a programme position
Press [3, 4, 2, 1] to select a programme position and press the
“Red” button.
∫ To change the tuning settings for individual
programme position
7 Press [3, 4, 2, 1]
to select a
programme position
and press [OK].
Press [3, 4] to select an item and press [1].
You can make the following two settings by selecting the external
input channel (AV1, AV2, AV3) in step 6.
≥Video System (Auto/PAL/SECAM)
In order to record properly, make the appropriate settings to match
the connected equipment.
≥Title Page (Auto/Off)
Analogue Manual Tuning
Manual Tuning
Pos Name Ch
Pos Name Ch
Delete
901 ARD 4
902 ZDF
2
903 N3
5
904 HR3
8
905 BR3 10
906
907
OK
RETURN
SELECT
908
909
910
911
912
913
914
915
916
917
918
919
920
Pos
Name
Channel
Fine Tuning
Video System
901
4
Auto
RETURN : leave
Manual
Tuning
ARD
Auto
Audio Mode
BG
Mono
Off
Title Page
301
RETURN
SELECT
Pos
Name
Channel
Fine Tuning
Video System
901
4
Auto
RETURN : leave
Manual
Tuning
ARD
Auto
Mono
Off
Title Page
301
RETURN
SELECT
[For]France,[Italy[and[Spain[
[For]Germany[
Pos Programme position in the table
(You cannot change the programme position.)
Name To enter or change the name of a TV station
Press [3, 4, 2, 1] to enter station name and
press [OK].
If the station name needs a blank space, select
the blank between “Z” and “¢”.
Channel To enter newly available TV stations or
change the channel number of an already
tuned TV station
Press [3, 4] or the numbered buttons to enter
the channel number of the desired TV station.
Wait a few moments until the desired TV
station has been tuned.
After the desired TV station is tuned, press
[OK].
Fine Tuning To obtain the best tuning condition
Press [3, 4] to adjust the best tuning
condition and press [OK].
≥Press [1] to return to “Auto”.
Video System To select the video system type
Press [3, 4] to select “PAL” or “SECAM” if the
picture lacks colour, and press [OK].
Auto: This unit automatically distinguishes
PAL and SECAM signals.
PAL: For receiving PAL signals.
SECAM: For receiving SECAM signals.
Audio Mode
[For]France,]
[Italy[and]Spain[
To select the audio reception type
If sound quality is poor, press [3, 4] to select
“BG” or “L” and press [OK].
BG: PAL B.G.H/SECAM B.G
L: SECAM L, L’
Mono To select the type of sound to be recorded
Press [3, 4] to select “On” if the stereo sound
is distorted due to inferior reception conditions,
or if you want to record the normal (mono)
sound during a stereo, bilingual or NICAM
broadcast, and press [OK].
Title Page To enter the Teletext title page for a channel
Entering title page number allows the unit to
automatically record programme and station
names.
Press [3, 4] or numbered buttons to enter the
number and press [OK].
≥To find the correct title page for the station,
refer to its Teletext TV guide.
Changing the unit’s settings
EX77_87.book Page 71 Friday, March 23, 2007 10:02 AM