Operating Instructions - QUICK SETUP GUIDE

3
After completing the connections,
proceed to the TV Tuning on Page 4.
Auto Setup
View / record satellite programmes
Press INPUT SELECT to select the
input channel AV2 or put this unit in
standby mode.
To record satellite programmes refer
to “Timer Recording from Sat with
VIDEO Plus+”.
22
(Operating Instructions)
AV OUT
RF OUT
LNB IN
6
To household mains socket
RF IN AV IN
Television’s rear panel
This unit’s rear panel
Satellite receiver’s
rear panel
Fully wired 21-pin Scart cable
4
6
To household mains socket
RF coaxial cable
(included, black)
3
RF coaxial cable
(included, black)
2
Fully wired 21-pin
Scart cable
5
Connecting to a television and satellite receiver
B
6
AC mains lead (included)
Connect only after all other
connections are complete.
To household mains socket
(AC 220 V to 240 V, 50 Hz)
RF IN
1
You can use a variety of Q Link
functions by connecting the unit to
a Q Link compatible television.
The RF cable cannot be used
for showing pictures from the
DVD Recorder. The unit must
be connected by another
means e.g. Scart cable to
show pictures from the DVD
Recorder on the television set.
59
(Operating Instructions)