Operating instructions

FUNCTIONS
VPS
FUNCTIONS
To Others
DVD
HDD
Please set Channel.
ENTER
RETURN
Change
Profile
Programme Name
HDD
All Services : -----
Timer
Recording
Number
0
9
RAM
HDD
99
33
46
VPS
ENTER
RETURN
HDD
Timer
Recording
Delete
Name Date Start Stop DVD Mode STTL
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 6. 3. MON
Remain HDD 36:40 SP DVD 1:30 SP
9:40:23 6. 3.MON
Name Date Start Stop DVD Mode STTL
All Services : ARTE
Programme Name
Press ENTER to input a programme name.
Timer Recording
7 ARTE 6. 3. MON 14:00 15:00 DVD SP Off
Name : Select the programme position/name of the TV station with .
Date : One-time, daily or weekly programming.
Start/Stop : Start time/end of recording. If you press and hold the buttons,
the time increases/decreases in 30-minute intervals. You can also use
the number buttons for these entries.
!
Press FUNCTIONS.
!
!
Select [To Others] with and confirm with ENTER.
Confirm [Timer Recording] with ENTER.
The Timer Recording screen appears.
!
Confirm [New Timer Programme] with ENTER.
!
Switch to the next entry with and change the setting with .
HDD/DVD : Select the drive.
Mode : Recording mode XP, LP, EP, SP, FR.
STTL : [On] or [Off]. Recorded subtitles cannot be deleted later.
If you programmed the Timer programmes one after the other in sequential
order, the first few seconds of the second Timer Recording are not recorded.
With other types of discs, it is approx. 30 seconds.
!
After you have made your changes, save the programming with ENTER.
!
To enter other programmes, select [New Timer Programme].
A Timer Recording does not start while a disc is being formatted, deleted or finalized.
The recording begins afterwards.
!
To enter the title of the recording, select [Programme Name] with and confirm
with ENTER.
!
Enter the desired name in the Programme Name menu.
!
Press STOP to apply the name.
If you receive your TV programme via a satellite receiver (digital/analogue):
On the external unit, select the station with the programme that you want to record.
The station must not be changed during the recording.
The programme on the set station is always recorded.
Name: Select [AV2] as the name of the TV station with .
Change Profile
To change the station name manually, you can select the station from the preset
Profiles.
!
Press the BLUE button in the [Name] box to see the first station of the
corresponding Profile.
!
Select the required station with and press ENTER to confirm.
DVD: Insert a disc.
If you activated write protection, cancel it.
RAM
Note for HDD: If you want to copy recorded titles in High Speed mode at a later point
in time, set the setting [Rec for High Speed Copy] to [On] in the Setup menu .
Read page 50 for further information on High Speed Copy.
63
Programming of Timer Recordings
--.--.---
--:--
--:--
SP
---
---
RENEW : For HDD, the date is set to daily or e.g. [MON - SAT].
[On]: The old recording is overwritten with the new recording.
[Off]: The recordings take place continuously.
The unit automatically switches to timer mode at the start time.
REC flashes in the unit's display one minute before the recording is set to start.