Manualshelf

Operating instructions

ManualsBrandsPanasonic ManualsDVD-playersDMREX75
11121314151617181920
65
B
13
Yes
No
Auto-Setup
No stations found !
Please check aerial connection.
Restart Auto-Setup ?
SELECT
RETURN
ENTER
Connecting to a television and Satellite receiver
Connection of Set Top Box or satellite receiver
1 Connect the aerial (SAT) to the RF IN (aerial input) of the external unit.
2 Connect the RF OUT (aerial output) of the external unit with the RF IN (aerial
input) of the DVD Recorder.
3 Connect the RF OUT (aerial output) of the DVD Recorder with the RF IN (aerial
input) of the television unit.
4 Connect the AV1 (21-pin Scart terminal) of the DVD Recorder with the
Scart input of the television unit.
5 Connect the external unit with a 21-pin Scart cable to the AV2 connection of the
DVD Recorder.
6 Connect the DVD Recorder, the TV and the external unit to the power supply
system.
7 Switch on the external unit, the TV and the DVD Recorder.
terminal
If you receive your television programme via a satellite receiver (digital/analogue),
connect your DVD Recorder as a downstream unit.
If your television supports Q Link, use a fully wired 21-pin Scart cable to connect it
to the TV. The stations automatically downloaded through [Download from TV].
If your television supports RGB, set the AV1 Output to RGB 1 or RGB 2 in the
Setup menu.
!
Turn on the television and select AV input that this unit is connected to.
!
ENTER
[Auto-Setup] follows automatically and it ends with the note: [No stations found !].
!
Select [No] with and confirm with ENTER.
The available stations are downloaded from the external unit.
!
Select with the required TV picture format and confirm with ENTER.
!
Switch the DVD Recorder to AV2 with CH . You see the television picture from
the external unit.
Select the corresponding Country with and confirm with .
Date and Time are not set automatically. Set them manually.
View/record satellite programmes
Press INPUT SELECT to select the input channel AV2 or put this unit in standby
mode.
The TV Guide does not show any information if you have connected the unit to a
satellite receiver only.