Operating instructions

60
11
60
18
20
DVB Auto Setup
Please wait !
Ch 5
69
Prog.
Net ID
TS ID
RETURN
RETURN : to cancel
Quality
Channel Service Name
Automatic Setup of the unit
After being switched on for the first time, the unit proceeds with an automatic
station search first for digital channels, then for analogue channels.
!
Switch the unit on using the Standby/on switch.
!
Turn on the television and select the AV input that this unit is connected to.
Auto Setup for your unit is complete.
The availability of stations may differ regionally.
You can now select your favourite stations and store them in the
required order in the Profiles.
TV Tuning (Auto Setup)
1 23 ZDF 12302 12289 9
2 23 Info/3sat 12302 12289 9
3 23 Doku/KiKa 12302 12289 9
4 23 RTL Television 12305 11397 9
5 23 RTL2 12305 11397 9
TV Aspect
6
5
Datenübernahme von TV
Analogue Auto Setup in progress.(without Q Link)
Download in progress.(with Q Link)
Analogue Auto-Setup in progress. Please wait.
RETURN : to cancel
Download in Progress. Please wait.
RETURN : to cancel
Auto Setup
3
Checking Broadcaster's data.
(with Q Link)
4
Checking Broadcaster's data.
RETURN : to cancel
TV Aspect
16:9 WIDE TV
16:9
4:3 TV
4:3
Letterbox
ENTER
SELECT
RETURN
Auto Clock Setting
(if not found automatically)
DVB Auto Setup
2
2
3
Auto Setup
The Auto Setup saves all available television stations and takes approx. 5 minutes. If
the station also broadcasts Date and Time, the time will be set automatically. If the
automatically set time is incorrect, you can set this manually.
Download from TV with (Registered trademark of Panasonic)
If your television is equipped with the Q Link feature, the stations are downloaded
through the transfer of the station table.
In order to be able to use Q Link, the unit must be connected to a TV with
Q Link or a similar feature via a fully wired 21-pin Scart cable.
DVB Auto Setup
Depending on different countries or regions, the digital TV programme has its own
selection of operating frequency channels, frequency bands, transmission
parameters and frequencies, The unit automatically searches for all available digital
television stations.
Active Antenna
If an Active Antenna is connected to the unit, no station was found during Auto Setup.
Switch [Active Antenna] to [On] in the Setup menu.
Then repeat the Auto Setup. After the Auto Setup, you can check the Signal
Condition in the Setup menu.
Setting Date and Time (if not found automatically)
If the Date and Time are not transferred via a television station, the Clock menu
appears.
!
Use or and to select the Time and Date.
!
Confirm the change with ENTER.
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
0
9
An incorrect Date or Time affects the programmed recording of television
programmes (note summer and winter time).
4
6
5
TV Aspect
!
Select the desired screen format with and confirm with . ENTER
You can repeat the station search.
Checking Broadcaster's data (with Q Link)
Once the station data has been downloaded from the television set, the analogue
stations are sorted accordingly.
65
Country
1
Country
1
!
Select the corresponding Country with and confirm with .ENTER
Off
Clock
Automatic
Clock cannot be set automatically.
Please set clock manually.
ENTER : store RETURN : leave
ENTER
CHANGE
RETURN
Time
Date
10 52 04 20 03 2006: : . .
AUTO
Time offset
67
Number
0
9
SELECT