Operating Instructions DVD Recorder Model No. DMR-EH80V VHS RECORDING HDD & DVD DVD-RAM/DVD-R/DVD-RW/+R RECORDING PAL NTSC RAM EJECT OPEN/CLOSE CH PULL OPEN VHS DVD HDD REC CH SD DRIVE SELECT HDD REC DUBBING VHS /x1.3 DMR-EH80V SD CARD / DV IN ™ PAL NTSC ™ The GUIDE Plus+ System is available in these countries: Belgium, Germany, France, Netherlands, Austria, Spain, Switzerland, Italy (Status: 30th April 2005).
Contents Before you start Safety precautions New functions Remote control Front panel Display Rear panel Page 3 4-5 6-7 8-13 14 15 16 FUNCTIONS selection menu Overview: FUNCTIONS selection menu Entering text Symbols 68-72 68 GUIDE Plus+ Overview: GUIDE Plus+ 73-80 73 DUBBING Overview: DUBBING 81-90 81 91-95 91 92-93 94-95 17 18 19 20 20 21-22 External devices Set Top Box, satellite receiver, decoder AUDIO OUT (L/R), OPTICAL AV3, DV-IN COMPONENT-VIDEO OUT 23-25 23 24 25 26 PLAYLISTS Creating a pl
Before you start Included A DVD/VHS VOLUME CH AV HDD VHS 1 2 3 4 5 6 7 8 DVD SD TRACKING/V-LOCK/PAGE CH 9 INPUT SELECT ShowView CANCEL/RESET 0 * SLOW/ SKIP/INDEX PAUSE STOP PROG /CH REW SEARCH ENTER SUB MENU RETURN S DISPLAY REC TIME SLIP STATUS CREATE HDD/DVD CHAPTER ERASE REC MODE EXT LINK AUDIO AC mains lead Audio/Video cable RJA0043-1C K2KA6CA00001 RF cable Batteries Operating Instructions AA, UM3 or R6 Guarantee Card TIMER DUBBING MANUAL SKIP JET REW DVD
Safety precautions Install this device in a horizontal position. Do not place anything heavy on it. Keep this device away from high temperatures and avoid changes in temperatures. Voltage: Only use power sources complying with the specifications for this device. AC mains lead protection: Ensure the AC mains lead is connected correctly and not damaged. Poor connection and lead damage can cause fire or electric shock. Service: Never attempt to repair this unit by yourself.
Sikkerhetsinstrukser (Norsk) ADVARSEL: FOR Å REDUSERE FAREN FOR BRANN, ELEKTRISK STØT ELLER SKADER PÅ PRODUKTET, MÅ DETTE APPARATET IKKE UTSETTES FOR REGN, FUKTIGHET, VANNDRÅPER ELLER VANNSPRUT. DET MÅ HELLER IKKE PLASSERES GJENSTANDER FYLT MED VANN, SLIK SOM BLOMSTERVASER, OPPÅ APPARATET. ADVARSEL! ! APPARATET MÅ IKKE PLASSERES I EN BOKHYLLE, ET INNEBYGGET KABINETT ELLER ET ANNET LUKKET STED HVOR VENTILASJONSFORHOLDENE ER UTILSTREKKELIGE.
New functions Your DVD Recorder saves data in the highest quality to a quickly accessible HDD and e.g. to DVD-RAM. Thus, there are many new features available that outperform older storage media. Immediate recording The unit finds available storage space on its own without overwriting your old data. To start recording right away, press the record button REC. Quick start After switching the unit on, use the Quick Start feature to begin recording to DVD-RAM or HDD after approx. one second.
New functions GUIDE Plus+ ™ Your DVD Recorder can display a television programme list for analogue broadcast. You can enjoy various useful features such as displaying the television programme list for up to the next 7 days and perform easy timer recordings by simply selecting the desired programmes from the television programme list. You can only receive GUIDE Plus+ data via the antenna input of your DVD Recorder.
Remote control DVD/VHS Standby/on switch Press to switch the unit from on to standby mode or vice versa. In standby mode, the unit is still consuming a small amount of power. Switching this unit into standby mode does not disconnect it from the mains. TV A/V channel DVD/VHS TV VOLUME CH DIRECT TV REC CH AV HDD VHS 1 2 3 4 5 6 12 SD CH VOLUME CH: Select the channel on the television set. VOLUME: Volume control of the television set.
Remote control HDD/DVD Functions VHS Functions Basic DVD/VHS SKIP/INDEX TV SKIP/INDEX SKIP: Skip chapters, titles or pictures. SLOW/ REW SEARCH AV FF SLOW/SEARCH: Search or slow motion playback 1 STOP SLOW/ REW SEARCH HDD VHS DVD 3 2 Stops a recording or playback. SD TRACKING/V-LOCK/PAGE 4 5 6 7 8 9 INDEX: Search for the beginning of a recording. VOLUME CH DIRECT TV REC STOP Basic FF REW/FF: Fast forward or rewind from stop mode.
Remote control HDD/DVD Functions REC VHS Functions DVD/VHS REC 51 Record REC TV REC Record VOLUME CH DIRECT TV REC 58 ECK TIMER RECORDING menu 54 VHS 1 2 3 ShowView menu 56 4 5 6 ShowView HDD DVD SD TRACKING/V-LOCK/PAGE PROG /CH PROG /CH AV ECK 59 TIMER RECORDING menu ShowView ShowView menu 60 Switch timer on and off. 60 Record with external recording control 62 CH Switch timer on and off.
Remote control HDD/DVD Functions Comfort DVD/VHS VHS Functions TV VOLUME CH DIRECT TV REC STATUS CREATE CHAPTER Launch the DISPLAY menu. 112 113 Detail information appears on the screen. 114 HDD VHS 1 2 3 4 5 6 7 8 9 AUDIO Erase a title or a chapter. 69 TIME SLIP: Select the timeframe to be skipped. 39 SLOW/ SKIP/INDEX REW SEARCH PAUSE STOP Depending on the disc, select the audio channel or the sound track. 38 Jumps forward 30 seconds.
Remote control Remote control signal sensor 30° 7m 30° Point the remote control at the unit’s sensor. Avoid obstacles in the path of the transmission. The maximum range of the remote control is 7 m directly in front of the unit. Keep the transmission window and the unit sensor clean. The procedure can be impaired by direct sunlight or doors of glass cabinets. Child lock You can lock the buttons of the unit and the remote control. ! Press and hold RETURN and ENTER until X HOLD appears in the display.
Remote control If you use another Panasonic unit at the same location, change the mode of the remote control so that you can operate the units independently of each other. FUNCTIO NS SETUP Remote Control MODE 1 Clock Tuning Disc Picture Sound Display Connection Others Remote Control Automatisch MODE Aus1 Power Save Quick Start Language MODE 2 Deutsch MODE 3 Shipping Condition Setting the remote control Setting the remote control mode for unit. ! Press FUNCTIONS in stop mode.
Front panel Cassette compartment Disc tray VHS RECORDING HDD & DVD DVD-RAM/DVD-R/DVD-RW/+R RECORDING PAL NTSC RAM EJECT PULL OPEN / VHS / OPEN/CLOSE DVD EXT LINK EXT LINK S VIDEO IN VHS REC CH DVD HDD SD DRIVE SELECT HDD REC CH DUBBING VIDEO IN L/MONO - AUDIO IN - R VHS AV3 DVD /x1.
Display VR TV TIMER-controlled recording. Blinking: There are less than 10 minutes until the start of a programmed TIMER recording. The device is not set to TIMER standby mode. SD Information displays in DVD/HDD mode Information displays in VHS mode VHS operating state, e.g.
Rear panel 1 HDD/DVD OUT 2 3 4 6 5 1 AC IN~ = Power supply 2 COMPONENT VIDEO OUT Y = Luminance signal (luminance) PB = Chrominance signal (colour difference) PR = Chrominance signal (colour difference) 7 8 HDD/DVD OUT 9 10 VHS/DVD COMMON 7 AV2 (DECODER/EXT) 21-pin Scart socket = connection of an external unit 8 AV1 (TV) 21-pin Scart socket = TV connection 3 R-AUDIO-L = Audio output right/left channel 4 VIDEO = Video output 5 S VIDEO = S VIDEO out connector 9 RF IN 6 OPTICAL
Connecting with a 21-pin Scart cable 1 Aerial 4 AC mains lead AC IN~ RF IN Aerial input Connecting the TV Setup With Q Link function and 21-pin Scart socket Download from TV 20 With a 21-pin Scart cable Auto-Setup 20 E DVD Recorder E Aerial infeed line HDD/DVD OUT AV1 21-pin Scart socket = Extra equipment for the connection shown: Aerial infeed line 21-pin Scart cable Follow the steps below. Disconnect the power from all units.
Connecting with Audio/Video cable (HDD/DVD only) 4 AC mains lead AC IN~ 1 Aerial RF IN Aerial input DVD Recorder Connecting the TV Setup With an Audio/Video cable Auto-Setup E E Aerial infeed line HDD/DVD OUT AUDIO/VIDEO output RF OUT Aerial output 20 = Extra equipment for the connection shown: Aerial infeed line Follow the steps below. Disconnect the power from all units. 1 Connect the aerial to the RF IN (aerial input) of the DVD Recorder.
Connecting with S VIDEO cable (HDD/DVD only) 1 Aerial 4 AC mains lead RF IN Aerial input AC IN~ DVD Recorder Connecting the TV Setup With an S VIDEO cable and an Audio cable Auto-Setup E HDD/DVD OUT E Aerial infeed line S VIDEO output AUDIO/VIDEO output RF OUT Aerial output 20 = Extra equipment for the connection shown: S VIDEO cable, Aerial infeed line Follow the steps below. Disconnect the power from all units. 1 Connect the aerial to the RF IN (aerial input) of the DVD Recorder.
Automatic setup Download from TV Pos Download from TV using 4 Download in progress, please wait. RETURN: to abort ! ! ! RETURN (Registered trademark of Panasonic) Note that you must first perform a station search. If you have a Panasonic television, [Download from TV] will be displayed automatically at the beginning of the station transfer. Switch your television on and select the AV channel. Switch the unit on using the Standby/on switch.
GUIDE Plus+ setup Auto-Setup Auto-Setup of the GUIDE Plus+ system Do you want to setup the GUIDE Plus+ system ? No Yes SELECT ENTER 12.1. Mi In order to receive data, the country, date and time of your current location must be set in the basic settings of the unit. When the unit is first set up, the Auto-Setup menu for the GUIDE Plus+ system will appear after the station search or the automatic station configuration (Q Link). You can not setup the GUIDE Plus+ system if the clock is not set.
GUIDE Plus+ setup Automatic update of the GUIDE Plus+ data 12. 1. Mi 14:55 Setup After the GUIDE Plus+ system has been set up, the data is automatically updated several times each day. To guarantee an update, switch your unit to standby mode and do not take your unit offline. During the update, GUIDE appears in the display of your unit. If you turn on the unit while GUIDE appears, the data update is interrupted.
External devices E = Extra equipment for the connections shown 2 AC mains lead AC IN~ DVD Recorder Connecting a Set Top Box, satellite receiver, decoder You can connect a Set Top Box to receive digital terrestrial signals (DVB-T), a Satellite receiver (digital / analogue) or a decoder for decrypting programmes. Disconnect the power from all units. 1 Connect the external device with a 21-pin Scart cable to the AV2 connection of the DVD Recorder.
External devices E = Extra equipment for the connections shown Amplifier (example) R Before you connect the cable, make sure that the power to both devices is turned off. After you have connected the cables, switch both devices on. L AUDIO IN Red/R Connecting an analogue amplifier or an analogue system component White/L In order to enjoy stereo or Dolby Pro Logic, connect the appropriate amplifier or an analogue audio component. ! ! E Audio cable Connect the analogue output (L/R) e.g.
External devices E = Extra equipment for the connections shown VHS / VIDEO IN / DVD EXT LINK EXT LINK L/MONO - AUDIO IN - R S VIDEO IN Connecting to the AV3 input sockets (e.g. Camcorder) AV3 Before you connect the cable, make sure that the power to both devices is turned off. After you have connected the cables, switch both devices on.
COMPONENT VIDEO OUT (HDD/DVD only) COMPONENT VIDEO OUT socket These sockets can be used for interlace or progressive output and deliver a clearer picture than the S VIDEO OUT socket. Connections via these sockets output colour difference signals (PB/PR) and luminance signal (Y) separately. Colours can be reproduced true to colour. The properties of the COMPONENT VIDEO input socket are dependent on the television set or screen. Always connect sockets of the same colour.
Handling discs Handling discs If the surface of a disc that does not have or was removed from a cartridge is damaged, scratches, dirt, dust or fingerprints can compromise the recording, editing or playback. Such damage can also occur when the disc is inserted back into the cartridge. Only play round discs. Do not touch the recording surface of the disc. Cleaning the DVD-RAM Clean the disc with a special DVD-RAM cleaner (optional) and read the cleaner instructions thoroughly before use.
Handling your HDD Your HDD (Hard disk drive) is a highly precise recording unit with a particularly long recording capacity and a high recording speed. Be careful with the unit since it can be easily damaged. Always save an additional backup copy of important data on a disc! ! Your HDD is sensitive to vibrations, jolts and dust. Improper handling or the wrong operating environment can lead to data loss. In some cases, the unit may no longer record or playback correctly.
Handling your HDD During operation Do not expose your HDD to jolts and vibrations. This can damage the HDD. Do not unplug or turn off the power during operation. The HDD spins at a very high speed. Sounds or movements are normal due to the rotational speed. If you want to transport the unit ! Switch the unit off. (Wait until "BYE" disappears from the display.) ! Unplug the unit. ! Note that the HDD continues to run for a short period of time after the unit has been switched off.
Disc formats Playback and recording discs HDD (Hard disk drive) 200GB rewritable TIME SLIP function, CPRM compatible, supports 2 channel sound, 16:9 format,creation of playback lists, deleting individual titles frees up storage space,Temporary storage TIME SLIP function, CPRM compatible, supports 2 channel sound, 16:9 format,creation of playback lists, deleting individual titles frees up storage space HDD 4,7GB / 9,4GB, 12cm RAM 2,8GB, 8cm rewritable 4,7GB, 12cm unfinalised DVD-R 1,4GB, 8cm (DVD-Video
Disc formats Cartridge discs When the write-protection device is activated, you can neither record nor edit or delete the contents of a disc. RAM DVD Video Recording format (VR) DVD-Video format (V) This format enables the free editing of recordings. Digital programmes that allow "one time only recording" can be recorded once on a CPRM-compatible DVD-RAM. Playback is only possible on compatible units. This format corresponds with the commercially available DVD-Video.
Using DVD-R, DVD-RW, +R Copying from HDD to DVD in high-speed mode -R -RW(V) +R You can copy titles from the HDD to DVD in high-speed mode. Before the titles are saved to the HDD, please perform the following settings: ! In the SETUP menu, set the setting for Rec for High Speed dubbing to [On]. 101 Please note the following when copying in high-speed mode: 16:9-format programmes are recorded in 4:3 format.
SD Memory Card Memory Cards SD Memory Card miniSD™ Card MultiMediaCard Panasonic LOCK ADAPTER Panasonic write protection 8MB to 1GB (Maximum) SD For playing back and copying (DUBBING) pictures that were recorded e.g. with a digital camera. Setting the DPOF feature (page 42). Pictures Use an appropriate adapter for miniSD™ cards. If the SD Memory Card has been formatted with another device, the recording can take longer than usual.
Playback Playback functions Playback Playback Pause during playback Cancelling playback Resuming playback Direct playback Selecting programmes/titles for playback A menu appears on the television screen MANUAL SKIP Slow-motion playback Fast forward/rewind Skipping chapters, titles or pictures Single-frame playback Quick View (Play/ x1.
Playback Preparation ! Switch your television on and select the appropriate AV channel. ! Switch the DVD Recorder on and select the desired drive with HDD or DVD. PLAY Playback HDD ! DVD ! ! ! STOP Press PLAY . Press OPEN/CLOSE to open the disc tray. Place the disc in the disc tray. Press PLAY . The disc tray is closed and playback begins.
M EN U DVD-RAM P TO DIRECT NAVIGATOR TITLE VIEW ECT DIR ATOR VIG NA Playback VIDEO Selecting programmes/titles for playback HDD RAM -R -RW(V) +R -RW(VR) PICTURE You can display the menu during playback, recording and in stop mode using the DIRECT NAVIGATOR button. 07 TP 12.9. THU Previous ENTER RETURN S SUB MENU ! ! ! Page 02/02 Select DIRECT NAVIGATOR: 68 Navigation 67 Symbols Next Previous Press DIRECT NAVIGATOR. Use to select the desired title and confirm with ENTER.
Playback SLOW/ REW SEARCH FF Not Slow-motion playback ! ! CD Press SLOW/SEARCH , in pause mode. Speed can be controlled in 5 stages. Press PLAY to resume normal playback. HDD RAM -R -RW(V) +R VCD The pause feature is automatically switched on after approx. 5 minutes. Only for forwards direction. DVD-A Only motion pictures Fast forward/rewind ! Press SLOW/SEARCH , during playback. As long as the button is pressed, the search speed increases in 5 stages. ! Press PLAY to resume playback.
Playback Quick View (Play/ x1.3) HDD RAM Increase playback speed without negative effects on sound. Press and hold PLAY during playback. ! Press PLAY again to return to normal playback speed. ! DVD-RAM PLAY x1.3 Output takes place in PCM with a digital connection. Quick View is cancelled if SKIP , or PAUSE is pressed or playback of a programme begins that was not recorded with Dolby Digital. Quick View does not function during simultaneous recording and playback in XP or FR mode .
Playback TIME SLIP JET REW ! ! ! ! TIME SLIP HDD RAM -R -RW(V) +R -RW(VR) Press TIME SLIP. Use to select the time that the playback should jump forward or back. If you press the buttons, the time span increases or decreases minute-by-minute. If you hold the button, it increases or decreases in 10-minute units. Press ENTER to confirm the selected time. Press PLAY to hide the picture in picture. PLAY 0 min The TV picture is shown as picture-in-picture.
MP3 playback FUNCTIONS Playback enu MENU Recording EPG GUIDE Plus+ TIMER RECORDING 23 ShowView Dubbing CD (MP3/JPEG) New CD(MP3/JPEG) MP3 Playback mode MENU Select file type. DUBBING MP3 JPEG To Others ENTER RETURN ENTER MENU G T TOTAL 1 1 1/ 12 No. 0 -- 9 Prev. Next SELECT ENTER RETURN MENU G 1 T 1 TOTAL 1/ 12 No. 0 -- 9 SELECT ENTER No.
JPEG playback JPEG Menu Picture playback PICTURE (JPEG) VIEW SD CARD Folder 002 001 PICTURE ! DISC 003 Press DIRECT NAVIGATOR. If TITLE VIEW appears, press the GREEN button, to switch to PICTURE. The PICTURE (JPEG) VIEW appears on the screen. Use to select the desired picture and start picture playback using ENTER. ! HDD RAM 004 ! To select a picture using the numeric buttons, press e.g. for picture no.
JPEG playback Folder ! Press DIRECT NAVIGATOR. ! HDD RAM If TITLE VIEW appears, press the GREEN button to switch to PICTURE. The PICTURE (JPEG) VIEW appears on the screen. Select Folder ! Use to select [Folder] in PICTURE (JPEG) VIEW. Confirm [Folder] with ENTER. ! In order to display the content of the folder, use to select the desired folder and confirm with ENTER. ! Press SUB MENU to edit the selected folder. ! In the submenu, use to select the desired setting and confirm with ENTER.
JPEG playback DIRECT NAVIGATOR PICTURE (JPEG) VIEW SD CARD Folder 014 013 PICTURE \SUMMER 015 017 Previous ENTER RETURN S Next Page 02/02 SUB MENU Select Previous Paging in the DIRECT NAVIGATOR Use to select [Previous] or [Next] and confirm with ENTER or press SKIP , . ! 016 Next Selecting several objects ! Use to select the desired title and press PAUSE deselect it.
JPEG/MP3 format The unit can process up to a maximum of 999 files and 99 folders (including higher folders). If TIFF-format pictures are to be played back or if there are a lot of files and/or folders, the procedure can take quite some time. Some files may not be able to be displayed or played back. MOTION JPEG is not supported. Folder structure MP3 CD JPEG HDD RAM CD SD DISC Root 001 (Folder=Group) JPEG DCIM *** (Subfolder) *** XXXXX (Picture folder) XXXX ****.JPG XXXX ****.TIF 001 track .
Playback Before playback If you have connected the unit with an audio/video cable, an S VIDEO cable or via COMPONENT OUT, you must set the TP channel. The TP channel enables the VHS playback in high quality, e.g. via COMPONENT OUT or as RGB to AV1. ! Press HDD/DVD and CH , several times to select the TP channel. Using video cassetes If the video cassette is not being used, remove it from the unit and store it in a sleeve.
Playback Switch the unit on and insert a recorded video cassette. SLOW/ REW SEARCH PLAY ! Playback Press PLAY to start the playback. Image search forwards ! ! From standby mode, you also start playback using PLAY . The tape automatically rewinds when the end is reached. This function is not available during a TIMER-controlled recording. Playback automatically starts when you insert a video cassette whose write-protection tab was removed. FF ! ! or backwards During playback, press or .
Playback SKIP/INDEX VHS index search system (VISS) This unit records special index signals with each recording. The index search function uses these signals. Thus, you can quickly find the beginning of a desired recording. You can search for up to 20 index signals. ! Press INDEX during normal playback or in stop mode. tape forwards / tape rewinds. The unit automatically begins playback when the index signal is found. The number of jumps increases with each press of the button.
Recording Recording functions Recording information Recording Recording, Pause during recording, Direct TV recording Setting a time for the end of the recording Playback during recording Simultaneous recording and playback FLEXIBLE REC (FR)) Displaying the available recording time 49-50 51-53 51 52 52 52 53 53 TIMER-controlled recordings Manual programming Storage space on the disc Backup recording VPS/PDC function Checking, changing or deleting TIMER RECORDINGS Options in the TIMER RECORDING menu Progra
Recording Recording information It is not possible to simultaneously record to the HDD (Hard disk drive) and a DVD. Continuous recording or playback of both sides of double-sided disc is not possible. Digital sound signals cannot be recorded. Digital programmes that are restricted to one-time recording cannot be recorded on DVD-R, DVD-RW, +R or 8cm DVD-RAM discs. Record them onto the HDD or a CPRMcompatible DVD-RAM.
Recording Recording information RAM If you use an unformatted DVD-RAM or DVD-RW you must format it before the first recording. Other functions available during playback HDD REC HDD DVD VHS PLAY PLAY REC or VHS PLAY 109 If you have activated the write-protection, cancel it. RAM -RW(V) 110 You can only change the channel or the record mode in pause mode. The material is then recorded as a separate title. HDD Long recordings are divided into 8-hour segments.
Recording Recording television programmes Use CH , or the number buttons to select the TV channel or use INPUT SELECT to select the AV channel for externally connected devices. Press REC MODE to select the recording mode. Press REC to start the recording. Press STOP to stop the recording. ! ! ! ! Up until the recording is stopped, it counts as 1 title. Once the recording is complete, the unit needs about 30 seconds to record administration data.
Recording Setting a time for the end of the recording ! HDD RAM -R -RW(V) +R During record, press REC on the unit. The unit display changes with each press of the button: Counter 30 60 90 120 180 240 Counter This is not possible with FLEXIBLE REC or TIMER-controlled recordings. The unit does not switch off after the recording ends. If you press STOP , the recording will be stopped and the time setting deleted.
Recording FLEXIBLE REC (FR) RAM -R -RW(V) +R The unit calculates the best possible recording quality between XP and EP. It is adjusted to fit the space available on the disc. This function is not possible during an EXT LINK recording. HDD Titles recorded to the HDD (Hard disk drive) in FR mode are recorded such that they can later be exactly copied to a 4.7GB disc. The title has not be edited for copying to disc or the recording mode (XP-EP) does not need to be changed. FLEXIBLE REC Recording in FR mode.
PROG /CH TIMER-controlled recordings TIMER RECORDING Remain HDD 72:50 LP DVD NrNo.Name Date Start Start Stop Stop Mode Drive Name Datum 01 ARD 02 ZDF 03 NDR MON - SAT 8:00 18. 2. THU 15:00 18. 2. THU 10:30 New Timer Programme TIMER RECORDING ENTER RETURN 8:30 15:30 11:30 Remain HDD 3:59 LP 12:09:37 18. 2. THU VPS Disc VPS Mode PDC space PDC 10/ 2 ON SP ON OK SP ON Relief SP 72:50 LP Name CANCEL Date Start Stop 1 ARD 18. 2.
PROG /CH TIMER-controlled recordings Remain TIMER RECORDING HDD 72:50 LP DVD NrNo.Name Name Datum Date Start Start Stop Stop Mode Drive 01 ARD 02 ZDF 03 NDR MON - FRI 8:00 18. 2. THU 15:00 18. 2. THU 10:30 8:30 15:30 11:30 New Timer Programme 3:59 LP 12:09:37 18. 2. THU VPS Disc VPS Mode PDC space PDC 10/ 2 ON SP ON OK SP ! ON SP ! ! ECK Checking, changing or deleting TIMER RECORDINGS Press PROG/CHECK. Use to select the TIMER RECORDING.
TIMER-controlled recordings Please take notice of the recording information. HDD RAM -R -RW(V) +R Remain ShowView 8 5 3 HDD 4 72:50 LP DVD 49-50 You can programme up to 32 programmes per month in advance. ShowView 3:59 LP 12:09:37 18. 2. THU Programming recordings with ShowView By entering a ShowView number, the TIMER-controlled recording is easy to set. The appropriate codes can be found in newspapers and TV guides. 2 Enter ShowView Number by using 0-9 key.
TIMER-controlled recordings TIMER RECORDING in the GUIDE Plus+ system TIMER RECORDING Remain HDD 106:51 SP VHS 1:36 SP DVD 2:00 SP 15:05:15 12. 1. WED Stop Drive Mode VPS PDC 6 VOX 12. 1. WED 15:05 16:05 HDD SP ON Eine himmlische Familie Programme Name Name Date Start Press ENTER to store the programme. ENTER CANCEL RETURN VHS Mode [Auto]: Automatic SP/LP switching.
Recording Recording time for E-240 cassettes SP - Normal mode: approx. 4 hours LP - Long-Play-mode: approx. 8 hours EP - Extra-Long-Play-mode: approx. 12 hours If you value a high-quality picture, select SP. Recording television programmes ! Insert a video cassette with an intact write-protection tab. ! Use CH , to select the channel. ! Press REC MODE to select the tape speed. With each press of the button, the display switches from: SP ! Press REC to start the recording.
PROG /CH TIMER-controlled recordings Timer recording 1 ------ 1/3 Name Date Start Stop ARD --------------------- 10:30 - - :- - - :- - - :- - - :- - - :- - 19.11. - -. - - -. - - -. - - -. - - -. - - ENTER : select CANCEL : delete 11:30 - - :- - - :- - - :- - - :- - - :- - VPS PDC SP ON - --- --- --- --- --- 19.11. - -. - - -. - - -. - - -. - - -.
TIMER-controlled recordings ShowView Programming recordings with ShowView. ShowView ! ! 8 3 5 4 2 - - - - ! ! 0 - 9 :enter ENTER : correct : access : return Insert a video cassette with intact write-protection tab. Press ShowView. Enter the ShowView number using the number buttons. Use to delete a number. Confirm the ShowView number with ENTER. In the Timer recording screen, check the start and end time and the VPS/PDC signal.
Recording via DV input DV AUTO REC Model of DV Panasonic NV--DX100 Remain 3:50(LP) Start DV automatic recording ? Cancel Rec SELECT ENTER RETURN DV AUTO REC Cannont detect DV connection. ENTER RETURN DV AUTO REC Status of DV unit has changed. Finish recording. ENTER Recording via DV input HDD RAM The programmes (e.g. via a digital video unit) are recorded as one title. A new chapter is created at each break in the picture and a playlist is automatically created.
TIMER-controlled recordings via external devices SETUP AV2 Settings AV2 Input Video Ext AV2 Connection Tuning Disc Picture Sound Display Connection Others Ext Link 1 Ext Link ExtExtLink ExtExt LinkLink 1 2 Ext Link 2 Switch the remote control to HDD or DVD. Press FUNCTIONS, use to select [To Others] and press ENTER. Use to select SETUP and press ENTER. Use to select Connection, , to select AV2 Settings and press ENTER. Use to select Ext Link and confirm with ENTER.
Recording from an external device, e.g. a camera Connect the external device to the AV3 input sockets on the front side of the unit. 25 Recording to VHS Insert a video cassette with intact write-protection tab. VHS / VIDEO IN / DVD EXT LINK EXT LINK L/MONO - AUDIO IN - R S VIDEO IN VHS AV3 Panasonic DMR-EH80V A B C Audio/Video cable A Yellow (Video) B White (L) C Red (R) ! ! ! ! ! ! ! Press REC MODE to select the recording mode.
Manually copying DC channel (copy input channel) If you select the DC channel, the VHS element can receive and record video/audio signals from HDD or DVD. VHS ! To select the DC channel press CH or INPUT SELECT several times. , TP channel (copy input channel) If you select the TP channel, the HDD/DVD element can receive video/audio signals from VHS and copy to HDD or DVD. DVD ! HDD To select the TP channel press CH , or INPUT SELECT several times.
FUNCTIONS selection menu You can access the main functions via the FUNCTIONS selection menu. ! The illustrations show DVD-RAM menus. The menu entries can be different depending on the disc or medium Playback ENTER RETURN FUNCTIONS ! ! DVD-RAM Disc Protection Off DIRECT NAVIGATOR EPG Recording EPG GUIDE Plus+ TIMER RECORDING 23 ShowView Dubbing ! FUNCTIO NS FUNCTIONS ! DUBBING DVD-RAM DIRECT NAVIGATOR Edit titles and chapters, protect recordings.
FUNCTIONS selection menu Entering text HDD RAM -R -RW(V) +R SD You can give discs or programmes titles in various menus: In DIRECT NAVIGATOR, in PLAYLISTS, in DISC MANAGEMENT and when setting the TIMER-controlled recording.
FUNCTIONS selection menu Symbols DIRECT NAVIGATOR Remain TIMER RECORDING HDD 3:59 LP 12:09:37 18. 2. THU VPS Disc VPS Stop Stop Mode Drive Mode PDC space PDC Nr No.Name Name Datum Date Start Start MON-FRI 8:00 18. 2. THU 15:00 18. 2. THU 10:30 01 ARD 02 ZDF 03 NDR 72:50 LP DVD 8:30 15:30 11:30 New Timer Programme ENTER RETURN SP SP SP ON ON ON 10/ 2 OK ! W F CANCEL DIRECT NAVIGATOR TITLE VIEW DVD-RAM Rec time 0:01(SP) VIDEO PICTURE No.
FUNCTIONS selection menu FUNCTIO NS DIRECT NAVIGATOR In DIRECT NAVIGATOR, you can archive, edit or start recordings after selecting a title. DIRECT NAVIGATOR TITLE VIEW DVD-RAM VIDEO 07 08 09 ARD 12. 9. THU SAT1 23.9. THU ZDF 1.10. FRI PICTURE TERRALUNA Previous ENTER RETURN S Next Page 02/02 SUB MENU Select Previous Next Direct access: ! Press DIRECT NAVIGATOR on your remote control. The DIRECT NAVIGATOR menu is displayed. Access via the FUNCTIONS menu: ! Press FUNCTIONS in stop mode.
FUNCTIONS selection menu FUNCTIO NS DIRECT NAVIGATOR Edit Title DIRECT NAVIGATOR TITLE VIEW DVD-RAM VIDEO PICTURE 01 Erase Properties Edit ARD 12. 9. THU Press SUB MENU in DIRECT NAVIGATOR. Use to select the desired option and confirm with ENTER. Erase HDD RAM -R -RW(V) +R Chapter View Previous ! ! Table View HDD/DVD ERASE The available recording time may remain the same after erasing short titles. The recording time on DVD-R/+R remains the same.
FUNCTIONS selection menu FUNCTIO NS DIRECT NAVIGATOR Erase Properties Edit Edit Title Enter Name Chapter View Set up Protection Cancel Protection Table View Partial Erase Other View Change Thumbnail Divide Title Set up title protection. SELECT DIRECT NAVIGATOR Partial Erase VIDEO HDD RAM PICTURE 0:00.35 End --:--.-- The complete name is displayed in the sub menu [Properties]. ! Confirm [Enter Name] with ENTER. ! Change or enter the title of the programme.
FUNCTIONS selection menu FUNCTIO NS DIRECT NAVIGATOR Erase Properties Edit Edit Title Enter Name Chapter View Set up Protection Cancel Protection Table View Partial Erase Other View Change Thumbnail Divide Title DIRECT NAVIGATOR Change Thumbnail DVD-RAM VIDEO ! ! ! Press SUB MENU in DIRECT NAVIGATOR. Use to select [Edit] and confirm with ENTER. Use to select the desired option and confirm with ENTER.
FUNCTIONS selection menu FUNCTIO NS DIRECT NAVIGATOR RETURN Playing back chapters DIRECT NAVIGATOR TITLE VIEW DVD-RAM VIDEO 02 03 ARD 12.9. THU ARD 23.9. THU ZDF 1.10. FRI AUTO TERRALUNA 01 ! ! ASTRAL ! Table View ! Other View ! VIDEO DVD-RAM 03 ZDF 002 Press SUB MENU in DIRECT NAVIGATOR. Use to select Chapter View and confirm with ENTER. Use [Previous] or [Next] to select additional pages and press ENTER. Select the desired chapter and start playback with ENTER.
FUNCTIONS selection menu FUNCTIO NS EPG GUIDE Plus+ GUIDE Plus+ system FUNCTIO NS Launching and operating the GUIDE Plus+ system 74 Direct access Access via the FUNCTIONS menu The GUIDE Plus+ information panels Landscape view in the GUIDE Plus+ system Changing stations in landscape view Portrait view in the GUIDE Plus+ system Changing stations in portrait view Programme information in the GUIDE Plus+ system Selecting the programme from the desired category in the GUIDE Plus+ system 74 74 74 75 75 76
FUNCTIONS selection menu FUNCTIO NS EPG GUIDE Plus+ Launching and operating the GUIDE Plus+ system Two convenient GUIDE Plus+ lists (Landscape view and Portrait view) in which you can select the desired station and display programme information are available in the GUIDE Plus+ system. FUNCTIONS DVD-RAM Playback Recording GUIDE Plus+ TIMER RECORDING 23 ShowView EPG DUBBING To Others ENTER RETURN 12.1.Mi 12.1.Wed Access via the FUNCTIONS menu: ! Press FUNCTIONS on your remote control.
FUNCTIONS selection menu FUNCTIO NS 15:05 Landscape 12.1. Mi Prog. Type All Types ARD Gilmore Girls 15:30 16:00 16:30 Ta... Abenteuer Wild... Fliege-Die Talkshow ZDF ... Derrick Heute in... Bianca-Wege... RTL Das Familiengericht Das Jugendgericht 16:05~17:05 Time: 15:00 SAT1 Richterin Barbara Sa... Richter Alexander... RTL2 Detektiv Duel M... Beyblade Yu-... VOX ... Eine himmlische Fa... Gilmore... PRO7 Die Abschl... Freunde... S.O.S Style & ...
FUNCTIONS selection menu FUNCTIO NS 12.1. Wed EPG 15:05 Prog. Type All Types Portrait 12.1. Wed ARD RTL SAT1 RTL2 VOX PRO7 ZDF Tagesschau 15:00~15:15 Abenteuer Wildnis 15:15~16:00 Abenteuer Wildnis 16:00~17:00 Fliege-Die Talkshow 17:00~17:15 Tagesschau um fünf 17:15~17:47 Brisant 17:47~17:49 Tagesschau 17:49~18:20 Verbotene Liebe Portrait view in the GUIDE Plus+ system ! Use to navigate within the GUIDE Plus+ list. Only current and future programmes are shown.
FUNCTIONS selection menu FUNCTIO NS 12. 1. Wed EPG 15:05 Programme information in the GUIDE Plus+ system Additional information (name of programme, programme duration, broadcast time, short description) is available for some programmes. These programmes have the symbol . You can display this information. 12. 1. Wed 7th Heaven VOX , Series 15:05-16:05 , 60Min Annie wants to rent out the appartement above the garage to Robbie. Lucy and Matt would like to move in there as well.
FUNCTIONS selection menu FUNCTIO NS 12. 1. Wed EPG 15:05 Landscape 12. 1. Wed 15:05~16:05 7th Heaven Time: 15:00 15:30 Prog. Type All Types 16:00 16:30 ARD Ta... Abenteuer Wild... Fliege-Die Talkshow ZDF ... Derrick Heute in... Bianca-Wege... RTL Das Familiengericht Das Jugendgericht SAT1 Richterin Barbara Sa... Richter Alexander... RTL2 Detektiv Duel M... VOX ... 7th7th Heaven Heaven. Beyblade Yu-... Gilmore Girls PRO7 Die Abschl... Freunde... Setup S.O.S Style & ...
FUNCTIONS selection menu FUNCTIO NS 12. 1. Wed EPG 15:05 Changing the basic settings for your GUIDE Plus+ system Setup Postal Code 31224 Host Channel Auto Data Download Auto Download Priority GUIDE Plus+ GUIDE Plus+ ENTER RETURN Host Channel The GUIDE Plus+ System information is transferred via the Host Channel. Wrong entries lead to incorrect data. The [Auto] setting is recommended. A Host Channel is then set by the system automatically.
FUNCTIONS selection menu FUNCTIO NS EPG GUIDE Plus+ Changing the basic settings for your GUIDE Plus+ system ! 12. 1. Wed 12. 1. Wed 15:05 15:05 Editor ! Reference ARD Source Tuner On ZDF Tuner On RTL Tuner On SAT1 Tuner Off RTL2 Tuner ***06 On VOX Tuner PRO7 On ---- Tuner MDR On MDR Tuner Name ARD On/Off On ZDF RTL SAT1 RTL2 Landscape 12. 1. Wed Prog. Type All Types 15:05~16:05 7th Heaven Time: 15:00 15:30 16:00 16:30 ARD Ta... Abenteuer Wild...
FUNCTIONS selection menu FUNCTIO NS DUBBING Dubbing overview 82 83 Information on high-speed copying Dubbing with the dubbing list Titles and playlists can be dubbed to the disc in the desired order. Editing the playlist Deleting all saved dubbing settings and lists 84 86 87 Dubbing information Recording and playback during dubbing Almost all videos and DVD-Videos available for purchase are copy-protected. The content of such media cannot be copied with this unit.
FUNCTIONS selection menu FUNCTIO NS DUBBING Different media formats with different dubbing methods can be copied with this unit. Dubbing overview Dubbing with the dubbing list 84-86 Cancel All 1 Dubbing Direction HDD DVD Mode 2 Dubbing VIDEO SP 3 Create List Start Dubbing Destination Capacity: 4080MB Size: 1306MB ( 32%) No. Size Name of item 01 0:12 SP ( 2%) TERRALUNA 02 0:11 SP (10%) CARS 03 0:12 SP ( 8%) Sharks 04 0:12 SP (12%) Animal World New item (Total = 4) Page 01/01 Create dubbing list.
FUNCTIONS selection menu FUNCTIO NS DUBBING Information on high-speed copying Copy direction HDD RAM -R -RW(V) +R Information on dubbing with the dubbing list. HDD _ ^ RAM In high-speed mode, it is possible to copy from HDD to RAM and vice versa. HDD _ RAM In normal-speed mode, it is only possible to copy from HDD to RAM. HDD ^ -RW(VR) In high-speed mode, it is possible to copy from DVD-RW(VR) to HDD.
FUNCTIONS selection menu FUNCTIO NS DUBBING Dubbing with the dubbing list RAM HDD Titles and playlists can be compiled and dubbed -RW(VR) HDD ! Press FUNCTIONS. -R +R -RW(V) HDD ! Select DUBBING and confirm with ENTER. HDD RAM -RW(VR) VHS ! Use and to select the desired option. HDD RAM SD HDD RAM SD only pictures DUBBING Cancel All Source Direction 1 Dubbing DVD HDD Mode 2 Dubbing VIDEO SP 3 Create List 0 Start Dubbing Cancel All Select the dubbing direction.
FUNCTIONS selection menu FUNCTIO NS DUBBING Cancel All 1 Dubbing Direction HDD DVD Mode 2 Dubbing VIDEO SP 3 Create List Start Dubbing ENTER RETURN S SUB MENU Destination Capacity: 4080MB Size: 1306MB ( 32%) No. Size Name of item 01 0:12 SP ( 2%) TERRALUNA 02 0:11 SP (10%) CARS 03 0:12 SP ( 8%) Sharks 04 0:12 SP (12%) Animal World New item (Total = 4) Page 01/01 Create dubbing list. Create List You can create a copy list from the existing titles and PLAYLISTS. ! Confirm [New item] with ENTER.
FUNCTIONS selection menu FUNCTIO NS DUBBING Destination Capacity: 4080MB Speicherplatz Ziel: 4080MB Size: 1306MB 32%) Größe: 0MB( ( 0%) No. Größe Size Name of item Nr. Elementname ( 2%) TERRALUNA 01 0:12 SP (---%) (10%) CARS 02 0:11 SP (---%) AUTOMARKT 03 0:12 SP (---%) ( 8%) Haie-Gefahr Sharks 01 04 0:12 SP (---%) (12%) Welt Animal 01 derWorld Tiere New item (Total(Gesamt = 4) = 4) Neues Element Page 01/01 Seite Create dubbing list. Kopierliste erstellen.
FUNCTIONS selection menu FUNCTIO NS DUBBING Dubbing information Recording and playback during dubbing During dubbing in high-speed mode, you can record to the HDD (Hard disk drive) or play back from it. ! Press ENTER to switch off the screen display. ! Use STATUS to display information on the dubbing procedure. Time-lapsed playback, editing, etc. are not possible during dubbing. Regardless of the selected recording drive, the timer recording is always saved to HDD during dubbing.
FUNCTIONS selection menu FUNCTIO NS DUBBING Timer-controlled Dubbing DVD-V HDD VHS VHS HDD RAM -R S-VHS HDD RAM -R -RW(V) +R -RW(V) +R The entire disc/cassette can be dubbed or the duration of the dubbing can be determined. The titles are transferred without chapters. The procedures and screen displays are also recorded during the dubbing. Video cassettes and DVD-Video discs available for purchase are usually copy-protected and cannot be dubbed. DVD-Audio, Video CDs, Audio CDs cannot be dubbed.
FUNCTIONS selection menu FUNCTIO NS DUBBING Dubbing Mode ! Use to select [Recording Mode] and confirm with ENTER. ! Use to select the desired recording mode [XP, SP, LP, EP, FR] and confirm with ENTER. The format is automtically identified. ! Use to return to [Dubbing Mode] and use to select [Dubbing Time]. For VHS the recording modes XP and FR are not possible.
DUBBING / Copying HDD One Touch Dubbing You can copy directly between VHS, HDD and DVD. HDD DVD The title that is currently running can be dubbed with just one push of the button without other settings being required. RAM -R -RW(V) +R VHS RAM -R -RW(V) +R -RW(VR) HDD HDD RAM -RW(VR) VHS HDD RAM -R -RW(V) +R S-VHS HDD RAM -R -RW(V) +R HDD VHS One Touch Dubbing from HDD to DVD/VHS copies the title/playlist which is currently being played or is stopped in resume mode.
FUNCTIONS selection menu FUNCTIO NS PLAYLISTS To Others HDD RAM RAM PLAYLISTS DVD-RAM Create 03 ZDF Source Title 02 01 1.10. FRI CARS 03 04 Page 01/01 Source Chapter Page 001/001 Chapters in PLAYLIST Page 001/001 Create Chapter PLAYLISTS DVD-RAM Creating a Playlist ! Press FUNCTIONS in stop mode. ! Use to select [To Others] and confirm with ENTER. ! Confirm PLAYLISTS with ENTER. ! In PLAYLIST VIEW, use to select the free [Create] field and confirm with ENTER. Create Source Chap.
FUNCTIONS selection menu FUNCTIO NS PLAYLISTS To Others Select / Edit Playlists Press FUNCTIONS. ! Use to select [To Others] and confirm with ENTER. ! Confirm PLAYLISTS with ENTER. ! Use to select a playlist. ! You can play the playlist with ENTER. ! ! Erase Properties Edit Erase Chapter View Erase PLAYLISTS? Erase Cancel SELECT ENTER RETURN Properties No. Chapters 02 001 Date 9.6.2004 WED Total 0:00.35 DVD-RAM PLAY L R With SUB MENU, the sub-menu for editing the playlist appears.
FUNCTIONS selection menu FUNCTIO NS PLAYLISTS To Others Edit Playlists Press FUNCTIONS. ! Use to select [To Others] and confirm with ENTER. ! Confirm PLAYLISTS with ENTER. ! Use to select a playlist. ! Press SUB MENU ! Use to select [Edit] and confirm with ENTER. ! In the sub-menu, select the desired option. ! Erase Properties Edit Chapter View Create Copy Enter Name Change Thumbnail Create Confirm [Create] with ENTER. Please read Creating a Playlist.
FUNCTIONS selection menu FUNCTIO NS PLAYLISTS To Others PLAYLISTS Edit Chapters PLAYLIST VIEW DVD-RAM ! 01 03 02 ! 23.9 THU 0:30 1.10 FRI 0:10 1.10 FRI 0:20 PLAYLISTS DVD-RAM 001 ! ! CHAPTER VIEW 03 ZDF 002 1.10. FRI 0:00 003 DVD-RAM Add Chapter 03 ZDF 1.10. FRI TERRALUNA Source Title Page 01/01 02 03 04 01 Source Chapter 001 Page 001/001 Chapters in PLAYLIST Page 001/001 ENTER S SUB MENU RETURN 94 In CHAPTER VIEW, use and press SUB MENU. ! In the sub-menu, use with ENTER.
FUNCTIONS selection menu FUNCTIO NS PLAYLISTS To Others PLAYLISTS Edit Chapters CHAPTER VIEW DVD-RAM DVD-RAM 03 ZDF 002 001 Previous 1.10. FRI 0:00 003 Page 01/01 004 Add Chapter Move Chapter Nächste Create Chapter Combine Chapters Erase Chapter PLAYLIST View PLAY LIST DVD-RAM Create Chapter 01 PLAY Create ! ! In CHAPTER VIEW, use to select the desired chapter and press SUB MENU. In the sub-menu, use to select the desired option and confirm with ENTER.
FUNCTIONS selection menu FUNCTIO NS COPY ALL PICTURES To Others Copying all pictures from an SD Card HDD RAM SD COPY ALL PICTURES Copy from \JPEG\DCIM001 SD CARD ENTER Copy To select the SD drive, press SD. ! Press FUNCTIONS. Use to select [To Others] and confirm with ENTER. Confirm COPY ALL PICTURES with ENTER. ! HDD ! In COPY ALL PICTURES, useand to select the folder that you want to view. Use and to select HDD or DVD and confirm with ENTER.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others ! ! ! ! ! ! Press FUNCTIONS in stop mode. Use to select [To Others] and confirm with ENTER. Use to select SETUP and confirm with ENTER. Use Use Use to select the desired sub menu and use to switch to setting. to select the desired setting and confirm with ENTER. to select the desired option and confirm with ENTER. Follow the menu navigation. The unit saves your settings.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Tuning SETUP Manual Download from TV SELECT ENTER RETURN Delete Move Add Pos 1 2 3 4 5 6 7 8 9 10 Name ARD ZDF N3 RTL SAT1 VOX PRO7 Manual Tuning Pos Name Ch Ch 7 11 4 12 13 2 12 14 11 15 8 1 Pos 16 Pos Manual 95816 ARD TuningName 9517 17 Name 18 Channel 2 19 Fine Tuning Auto 20 Decoder Off CHANGE Video System Auto Audio Mode BG ENTER RETURN Mono Off 0 -- 9 Title Page 301 RETURN : leave ENTER : store 98 ENTER Entering a new television station
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Tuning SELECT ENTER RETURN Delete Move Add Pos 1 2 3 4 5 6 7 8 9 10 Manual Tuning Name ARD ZDF N3 RTL SAT1 VOX PRO7 Pos Name Ch Ch 7 11 4 12 13 2 12 14 11 15 8 1 16 Pos ManualPos 95816 ARD 9517 17 Name TuningName 18 Channel 7 19 Fine Tuning Auto 20 Decoder Off CHANGE Video System Auto Audio Mode BG ENTER Off RETURN Mono Title Page 301 RETURN : leave ENTER : store Manual ENTER Changing the name of the television station Use to select the name o
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Tuning Auto-Setup Restart ! No SELECT ENTER ENTER Auto-Setup Restart Use to select [Yes] and confirm with ENTER. The station search begins. ! To cancel the process, use to select [No] and confirm with ENTER or press RETURN. ! To stop the station search early, press RETURN.
FUNCTIONS selection menu FUNCTIO NS SETUP Tuning Disc Picture Sound Display Connection Others To Others Settings for playback Ratings Level 5 Off DVD-Audio Video mode Playback Deutsch Soundtrack Ratings UnlockAutomatisch Recorder Subtitle Change Deutsch Password Menus Change Level Temporary Unlock SELECT ENTER RETURN SETUP Disc Ratings You can restrict the playback of DVD-Video by entering a password. 8 Allows all titles. 1-7 Stops playback of DVD-Video with registered security levels.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Picture SETUP Tuning Disc Picture Sound Display Connection Others Comb Filter On Still Mode Automatic Seamless Play S-VHS Dubbing Setting On Automatic Comb Filter Still Mode TAB Settings ENTER Options ENTER [ON] [Off] On: The picture becomes clear and contour-rich. This setting is always set to [On] if you have selected [TV System - NTSC]. Off: If the picture to be recorded is grainy.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Sound SETUP Tuning Disc Picture Sound Display Connection Others Dynamic Range Compression Bilingual Audio Selection Off M1 Digital Audio Output Audio Mode for XP Recording Dolby Digital Stereo 1 Audio Mode for DV Input ENTER Options ENTER Dynamic Range Compression DVD-V (only Dolby Digital) [ON] [Off] On: The level of quiet sections is increased and the level of loud sections is decreased.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Sound SETUP Tuning Disc Picture Sound Display Connection Others Digital Audio Output Digital Audio Output PCM Down Conversion Dolby Digital Off Bitstream DTS MPEG Bitstream PCM Dolby Digital Ext Link 1 Bitstream PCM SELECT ENTER RETURN PCM Down Conversion Dolby Digital ENTER DTS ENTER Options MPEG Select the appropriate setting if an external unit is connected to the DIGITAL AUDIO OUT of the DVD Recorder.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Display SETUP Tuning Disc Picture Sound Display Connection Others On-Screen Messages Grey Background Automatic On FL Display Bright TAB SELECT RETURN Settings ENTER Options On-Screen Messages [Automatic] [Off] Automatic: The screen messages are displayed on the screen. Grey Background [ON] [Off] On: The grey background is displayed when there is no television reception.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Connection SETUP Tuning Disc Picture Sound Display Connection Others TV Aspect Progressive TV System 16:9 AV1 Output Video TV Aspect Off PAL AV2 Settings ENTER Options ENTER [16:9] [4:3] [Letterbox] Select the TV picture format of your television set. Letterbox: Black strips appear at the top and bottom of your screen. Progressive [ON] [Off] Only COMPONENT VIDEO OUT.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others Connection SETUP Tuning Disc Picture Sound Display Connection Others SETUP TV Aspect Progressive TV System 16:9 AV1 Output Video AV2 Settings Off PAL AV2 Settings TAB ENTER AV2 Input AV2 Connection ENTER Settings Options ENTER Perform the settings in the following sub-menus for the connected device. Ext Link AV2 Input [RGB / Video] [RGB] [Video] [S Video] RGB / Video: Is detected automatically.
FUNCTIONS selection menu FUNCTIO NS SETUP To Others SETUP Tuning Disc Picture Sound Display Connection Others Remote Control MODE 1 Clock Power Save Quick Start Language Shipping Condition Default Settings TAB Others Remote Control Off On English 0 : 00 : 00 [ON] [Off] On: The device is ready for use from standby mode after approx. 2 seconds. Standby mode uses more power and Power Save is set to [Off]. Language Select the desired language for the menus and the On-Screen Messages.
FUNCTIONS selection menu FUNCTIO NS DISC MANAGEMENT To Others DISC MANAGEMENT DVD-RAM Title No. 1 Used 0:01 Remain 0:59(XP) ! ! Disc Name ! Disc Protection ! Off ! Erase all titles Press FUNCTIONS in stop mode. Use to select [To Others] and confirm with ENTER. Use to select DISC MANAGEMENT and confirm with ENTER. Use to select the desired menu and confirm with ENTER. Use FUNCTIONS to return to the FUNCTIONS menu. Format Disc SELECT ENTER 66 Disc Name RAM -R -RW(V) +R ! Enter the name.
FUNCTIONS selection menu FUNCTIO NS DISC MANAGEMENT To Others DISC MANAGEMENT DVD-RAM RAM Title No. 1 Used 0:01 Remain 0:59(XP) ! ! Disc Name Off Disc Protection ! Erase all titles ! ! Format Disc SELECT ENTER RETURN Format Disc Formatting will erase all contents. This will take approximately 1 minute. Start formatting ? Yes No Format Disc All contents will be erased even if protected.
FUNCTIONS selection menu FUNCTIO NS DISC MANAGEMENT To Others DISC MANAGEMENT DVD-R ! Remain Title No. 1 Used 0:01 0:59(XP) ! Disc Name ! 1 Top Menu Auto-Play Select ! Top Menu ENTER Auto-Play Select RETURN Top Menu Title 1 Auto-Play Select -R -RW(V) +R Before finalization, you must select the start menu to be shown at the beginning of the DVD-V. ! Use to select [Top Menu] or [Title 1] and confirm with ENTER. If [Top Menu] is selected, the disc menu appears first.
DISPLAY menus DISPLAY menus contain information about the disc or the unit. With DVD-Video you can use the repeat function, change subtitles and angles, with DVD playback, you can change the picture and sound setting. Depending on the status of the unit (playback, stop), there are some entries that cannot be selected or changed. Subtitles, soundtrack and recording angle can only be selected if they were recorded on the disc. With some discs, these can only be changed via the disc menus.
DISPLAY menus DISPLAY Disc Play Picture Sound Other DISPLAY Disc Play Picture Sound Other DISPLAY Disc Play Picture Sound Other DISPLAY Sound Other Play Repeat Play Option Off Picture Playback NR Progressive On Option Off Transfer Auto Sound V.S.S. Dialog Enhancer Off Off VCD CD Track All Off DVD-A MP3 Track Group Off Off If the video CD has playback control ! Select a piece using the number buttons in stop mode. Setting [On] [Off] Reduces noise and image distortion.
STATUS displays STATUS Displaying the information ! ! ! Press STATUS. Press STATUS again. The display changes each time that the button is pressed. To exit the display, press STATUS. 1: Current medium 2: Current recording and playback state, input channel DVD-RAM PLAY 1 2 ARD Stereo LR 3 4 HDD REC 5 PAUSE PLAY PLAYx1.3 Record Pause playback Pause recording Fast forward (5 speeds) Playback Rewind (5 speeds) Quick View (Playback x1.
STATUS displays When using the unit, information on the settings of the unit and the operating procedure appear on the telelvision screen. STATUS ! Displaying the information Press STATUS. Each time the button is pressed, the display switches from: time - tape counter - tape remaining time. During the index search, [01] through [20] is displayed, during JET Rewind [JET REW]. REMAIN: VHS These displays do not apper in PAUSE mode or during slowmotion playback.
VHS FUNCTIONS FUNCTIO NS Settings in the VHS FUNCTIONS Menu VHS FUNCTIONS Timer recording QUICK ERASE Tape length PB Colour system SQPB OSD : select RETURN : return : AUTO ( E - 240) : AUTO : AUTO :4:3 ENTER : access Changing the settings ! Press FUNCTIONS in stop mode. ! Use to select the desired entry. ! Use to change the setting. ! Press RETURN to exit the menu. Timer recording Timer-controlled recording QUICK ERASE Erase all recordings on a played tape.
Before requesting service RESET Restoring the default factory settings while retaining your main settings. î î î In the SETUP menu for Shipping Condition, select the option [Yes]. All settings except for password, time and security level will be reset to the factory default settings. The timer recording programmes will also be deleted. In the SETUP menu for Default Settings, select the option [Yes].
Before requesting service HDD Access to the HDD (Hard disk drive) is slow. The disc cannot be ejected. î The HDD (Hard disk drive) is in SLEEP mode. (“HDD SLP” appears in the display of the unit.) î î The unit is currently recording. The unit is out of order. With the unit switched off, press and hold STOP and CH and CH at the same time for approx. 5 seconds. Remove the disc and contact your dealer. The procedure cannot be executed if the child-safety feature is activated.
Before requesting service FUNCTION No function possible. The unit is switched on but cannot be used. î Check the power supply connection. î There is a malfunction. The numbers following the letter «H» indicate the condition of the unit. /I. If the unit does not switch to standby mode, press and hold /I for approx. 10 seconds or unplug it from the power supply for approx. one minute and reconnect the cable. ! Press /I to switch the unit on.
Before requesting service STROM DISPLAY The display lighting is weak. Change the [FL Display] in the Display SETUP menu. î No time. Set the time in the Others, [Clock] SETUP menu. î î î î If the unit is in timer standby mode ( on the unit) end this with TIMER. A wrong remote control code was selected. Check the batteries. Point the remote control at sensor on the unit. The child lock feature has been activated. 12 î A wrong remote control code was selected.
Before requesting service RECORDING Cannot record î Check whether the inserted disc is suitable for recording. î The disc is not formatted. Format the disc (RAM/DVD-RW). î The write-protection device on the Cartridge is set to "PROTECT". Deactivate the write protection. î If you activated the write protection, deactivate it in the DISC MANAGEMENT menu. î The material that you want to record is copy-protected. Some or all recorded programmes were lost.
GUIDE Plus+ system: Questions and answers SETUP Why does my GUIDE Plus+ system not receive any data ? Check whether GUIDE Plus+ system setup was performed in full. / The GUIDE Plus+ system data is updated several times each day. When the device is first connected, the GUIDE Plus+ system is not yet ready to receive data. / The device takes approx. 1 hour (on average 30 minutes) to find the Host Channel. After this, it takes up to 24 hours to load all of the data.
GUIDE Plus+ system: Questions and answers DOWNLOAD How does my unit behave during data transfer ? During data transfer, "GUIDE" appears on your unit’s display and the unit’s fan switches on.
Glossary Bitstream Digital multi-channel audio data (e.g. 5.1-channel) before decoding to the individual channels. Decoder (e.g. DTS / Dolby Digital) A decoder converts the coded audio signals of the DVDs back to the original signals. This procedure is called decoding. Dolby Digital A coding procedure for digital signals that was developed by Dolby Laboratories. It may involve (2-channel) stereo sound signal or multi-channel sound. The procedure enables the saving of large amount of audio data on a disc.
Further Information This DVD Recorder is a precision unit. Handle it carefully and do not expose it to vibrations during recording. Otherwise there may be breaks or noises in the recordings. The manufacturer accepts no responsibility and offers no compensation for loss of recorded or edited material nor for consequential damages attributed to a defect in the unit or the disc. Dolby Digital Method of encoding digital signals.
Specifications Power supply: AC 220V-240 V, 50 Hz Power consumption: 46 W (approx. 5 W in power save) Dimensions: Weight: Operating temperature: Operating humidity: DVD/HDD approx. 430 mm (W) x 89 mm (H) x 380 mm (D) approx.
Specifications DVD/HDD Video interface TV system Input AV1 SCART AV2 SCART AV3 Socket S Video Output AV1 SCART AV2 SCART DVD Socket S Video Component Video (Socket) PAL: 625/50 / SECAM (input only) NTSC: 525/60 The input impedance of each input socket is 75 Ohm. Video: 1 Vp-p Video: 1 Vp-p, Y: 1 Vp-p C: 0.3 Vp-p (PAL-Burst), RGB: 0.7Vp-p (625/50) Video: 1 Vp-p Y: 1 Vp-p, C:0,3 Vp-p (PAL-Burst) The output impedance of each output socket is 75 Ohm. Video: 1 Vp-p; RGB: 0.
Index Angle Audio channel Audio Mode AV1 Output AV2 Connection AV2 Input AV2 Settings Page 112 38,50,112 98,103 106 107 107 107 Backup recording Bilingual Audio Selection Bitstream 54 103 104 CD (MP3/JPEG) Child lock Comb Filter CPRM / Cartridge-disc 40 12 102 31 Date 108 DC channel 64 Decoder 23,107 Default Settings 108 Dialog Enhancer 113 Digital Audio Output 104 Disc formats 30,31 Disc Protection 109 Dolby Digital 24,104,125 DPOF 42 DTS 24,104,125 DV 25,61,65,103 DVD-Audio Video mode Playback 101 D
