Operating Instructions

Convenient functions
SQT0139
85
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
To set the IP address and DNS
1 Set “IP Address Auto-assignment” and
“DNS-IP Auto-assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Proxy Server Settings
Check and set the connection to the Proxy
server.
Press [OK] to show the respective setting.
Network Service Settings
Second Screen Browsing
When this function is set to “On”, you can
enjoy the content you are viewing on a
network service application of smartphone,
etc. with the home network on the big
screen of your TV.
Lock
You can restrict using Network Service.
PIN is required to change. (> 24)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
Depending on contents, this function will
not work.
Select “Off” when the audio is warped.
Remote Recording Function Settings
You must register to a service to use this
function.
For details please check the following
website.
http://panasonic.jp/support/global/cs/
(This site is in English only.)
Remote Recording function
When you set a recording from a
smartphone or a PC, etc. away from
home, set this function to "On".
Device ID
This is the device ID and device password
required for registering to and using a
service.
Initialize Device Password
The device password for this unit is
initialized.
When you initialize the device password,
you will not be able to use Remote
Recording function. To use the Remote
Recording function again, you must
re-register to the service.
Home Network Settings
You can set the DLNA (Server) function.
(> 64)
Home Network function
You can switch between enable/disable of
the DLNA (Server) and DMR (Media
Renderer) function.
If “On” is selected, the setting for “Quick
Start” is fixed to “On”. (> 86)
If “Off” is selected, the setting for
“Remote Recording function” is fixed to
“Off”. (> above)
This cannot be set to “On” if the
connection with the wireless broadband
router is not encrypted in the wireless
connection.
DMR-BWT740EB_eng.book 85 ペー 2014年4月3日 木曜日 午後3時24分