Operating Instructions

VQT4E89
14
Getting started
Connection
3D programmes can be played back when this unit is connected to a 3D compatible TV.
• Before connection, turn off all equipment and read the appropriate operating instructions.
BE SURE TO READ THE CAUTION FOR AC MAINS LEAD ON PAGE 3
If the TV does not have the HDMI terminal
Connect the TV with the 21-pin Scart cable or the Audio/Video cable. (> 15)
To connect and register the USB HDD (optional)
Refer to “Registering the external HDD (USB HDD)”. (> 74)
To connect the Communication Camera (optional)
Refer to “VIERA Connect (Enjoying Internet Service)”. (> 79)
About HDMI cable
• Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
• When outputting 1080p signal, please use HDMI Cables 5.0 meters or less.
• Recommended Panasonic HDMI cable part number:
RP-CDHS15 (1.5 m), RP-CDHS30 (3.0 m), RP-CDHS50 (5.0 m), etc.
Basic connections
AV1
VIDEO
RGB/S VIDEO
()
AV2
()
EXT
TV
VIDEO
S VIDEO
HDMI
VHF/UHF
RF IN
This unit’s rear panel
Household mains socket
(AC 220 to 240 V, 50 Hz)
Cooling fan
AC mains lead
(supplied)
• Connect only after all other
connections are complete.
HDMI cable
To the aerial
Aerial cable
RF coaxial cable
(supplied)
TV’s rear panel
DMR-BWT720EB_eng.book 14 ページ ２０１２年３月２６日 月曜日 午後１時３２分