Operating Instructions

Convenient functions
VQT3C13
84
VIERA Link/Q Link functions
Preparation
1 Connect this unit to your TV or receiver using an
HDMI cable. (> 10)
2 Set “VIERA Link” to “On” (> 99). (The default
setting is “On”.)
3 Set the “HDAVI Control” operations on the
connected equipment (e.g., TV).
≥Set the input channel on the VIERA to suit the
terminal to be used as “HDAVI Control”.
4 Turn on all “HDAVI Control” compatible equipment,
then select this unit’s input channel on the
connected TV so that the “HDAVI Control” function
works properly.
Also when the connection or settings are
changed, repeat this procedure.
Preparation
Connect this unit to your TV with a fully wired 21-pin
Scart cable.
For your reference
The following systems from other manufacturers have
similar functions to Q Link from Panasonic.
For details, refer to your TV’s operating instructions or
consult your dealer.
≥Q Link (registered trademark of Panasonic)
≥DATA LOGIC (registered trademark of Metz)
≥Easy Link (registered trademark of Philips)
≥Megalogic (registered trademark of Grundig)
≥SMARTLINK (registered trademark of Sony)
(VIERA]Link) (Q]Link)
When the following operations are performed, the TV
will automatically switch the input channel and display
the corresponding action. Additionally when the TV is
off, the TV will automatically turn on.
–When play starts on the unit
–When an action that uses Direct Navigator or
FUNCTION MENU etc, is performed
(VIERA]Link) (Q]Link)
When you set the TV to standby mode, the unit is also
automatically set to standby mode.
≥Power off link function does not work when
recording, copying, etc.
(VIERA]Link)
The following operations make it possible to keep the
power of the unit on and to play music continuously.
When the unit is directly connected to an amplifier/
receiver.
1 While playing music
Press [OPTION].
2 Select “TV Power Off”, then press [OK].
≥Sound may be discontinued for several seconds
when the power to the TV is turned off.
(VIERA]Link)
You can operate this unit with the TV remote control.
Refer to “PAUSE LIVE TV” on page 30.
(VIERA]Link) (Q]Link)
This function allows you to immediately start
recording the programme that you are viewing on the
TV.
Refer to the TV operating instructions for
operation.
≥This unit will record the programmes in DR mode
once, and then automatically convert to the selected
recording mode while this unit is in standby. (> 32)
What is VIERA Link “HDAVI Control”?
VIERA Link “HDAVI Control” is a convenient
function that offers linked operations of this unit,
and a Panasonic TV (VIERA) or receiver under
“HDAVI Control”. You can use this function by
connecting the equipment with the HDMI cable.
See the operating instructions for connected
equipment for operational details.
What is Q Link?
Q Link is a convenient function that offers linked
operations of this unit and a Panasonic TV. You
can use this function by connecting the
equipment with a fully wired 21-pin Scart cable.
Automatic input switching
Power on link
Power off link
Playing music continuously even
after turning off power to the TV
§2
PAUSE LIVE TV
§1
Direct TV Recording
§1
DMRBWT800&700EB-VQT3C13_eng.book 84 ページ ２０１１年３月２４日 木曜日 午後２時４４分