Operating Instructions

Recording
VQT3C13
42
Timer recording
Press [STOP ∫].
∫ When recording 1 programme
Select “Yes”, then press [OK].
∫ When recording 2 programmes
1 Select the programme, then press [OK].
2 Select “Yes”, then press [OK].

≥ If you have already set a daily/weekly/series timer
recording, the recording will start at the next scheduled
time.
≥When recording except in DR mode, the audio
content will be selected according to the following
settings:
–“Multi Audio” and “Audio Description” of “Preferred
Multi Audio” (> 93)
–“Preferred Subtitles” (> 93)
–“Audio for HG / HX / HE / HL / HM Recording”
(> 97)
≥(Only when recording broadcast)
This unit will record in the DR mode once, and then
convert to the selected mode automatically during
standby. (> 32)
≥Depending on the state of the unit, playback may
stop when recording begins.
≥Even if you turn the unit off during the timer
recording, the recording is continued.
≥When you programme successive timer recordings
to start, about last 1 minute of earlier programmes
will not be recorded.
¾ About 2 programme simultaneous recording
(> 35)
¾ Starting the timer recording while executing
other operation (> 118)
To cancel recording when timer
recording has already begun
Stop Recording
Yes
No
Timer recording of this programme is in progress.
Stop this recording ?
OK
RETURN
1
Stop Recording
2 recordings are in progress.
Which recording would you like to stop ?
OK
RETURN
1
2
Notes on timer recording
Not recorded
Programme
Recorded Recorded
Programme
DMRBWT800&700EB-VQT3C13_eng.book 42 ページ ２０１１年３月２４日 木曜日 午後２時４４分