Operating Instructions

Convenient functions
VQT3C13
100
Changing the unit’s settings
∫ Network Easy Setting
Press [OK] to start Network Easy Setting. (> 16)
∫ Network Settings
¾ LAN Connection Mode
Select connection method.
≥[BWT700] “Wireless” is enabled only when the
Wireless LAN adaptor DY-WL10 (optional) is
connected.
¾ Wireless Settings
This allows the Wireless router and connection
settings to be set and the current connection
settings and connection state to be checked
when a wireless connection is used.
¾ Connection Setting
The Wireless router connection wizard will be
displayed.
¾ Double Speed Mode Setting (2.4GHz)
When a 2.4 GHz wireless format is used, this
setting sets the connection speed.
≥If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the same
frequency band, and there is consequently a
greater risk of reception interference. This
can cause the connection speed to drop or
the connection to become unstable.
¾ IP Address / DNS Settings
Check the connection of the network or set the IP
address and DNS.
≥Press [OK] to show the respective setting.
¾ Proxy Server Settings
Check and set the connection to the Proxy
server.
≥Press [OK] to show the respective setting.
¾ Internet Content Settings
¾ Lock
You can restrict using VIERA CAST.
≥Follow the on-screen instructions.
≥PIN is required to change. (> 91)
¾ Automatic Volume Control
Volume that is different depending on the
contents is adjusted automatically to the
standard volume while using the VIERA CAST.
≥Depending on contents, this function will not
work.
≥Select “Off” when the audio is warped.
Network
Setup
Network
Network
Network Easy Setting
Network Settings
Network
Network Settings
Network Settings
Wireless Settings
IP Address / DNS Settings
Proxy Server Settings
Internet Content Settings
Home Network ( DLNA ) Server Settings
LAN Connection Mode
Network Settings
Wireless Settings
Wireless Settings
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
(SSID)
:
Wireless type
802.11n (2.4GHz/20MHz)
:
Authentication type :
Encryption type
AES
:
Reception
:
:
Connection Setting
Double Speed Mode Setting ( 2.4GHz )
Type of Wireless router
Encryption type Reception

≥ “Connection Speed Setting” is enabled only when
“Connection Speed Auto-configure” is turned “Off”.
Network Settings
Internet Content Settings
Internet Content Settings
Automatic Volume Control
Lock
DMRBWT800&700EB-VQT3C13_eng.book 100 ページ ２０１１年３月２４日 木曜日 午後２時４４分