Operating Instructions

Convenient functions
VQT5D92
96
Basic Settings
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 24)
Network Settings
LAN Connection Mode
Select the LAN connection method.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
1 Encryption type
2 Reception
3 Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Wireless Settings
Double Speed Mode Setting ( 2.4GHz )
Connection Setting
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
( SSID )
Wireless type
802.11n (2.4GHz/20MHz)
Authentication type
Encryption type
AES
Connected
Reception
  
IP Address / DNS Settings
Check the connection of the network or set
the IP address and DNS.
• To set the IP address and DNS
1 Set “IP Address Auto-assignment” and
“DNS-IP Auto-assignment” to “Off”.
2 Select the item, then press [OK] to show
the respective setting.
• When the router’s DHCP server function is
not activated, check the numbers of other
connected devices such as personal
computers, then assign a number different
from those of other devices for the “IP
Address” and assign the same number for
“Subnet Mask” and “Gateway Address”.
Proxy Server Settings
Check and set the connection to the Proxy
server.
• Press [OK] to show the respective setting.
Network Service Settings
Lock
You can restrict using Network Service.
• PIN is required to change. (> 27)
Automatic Volume Control
Volume is adjusted automatically to the
standard volume while using Network
Service.
• Depending on contents, this function will
not work.
• Select “Off” when the audio is warped.
DMR-BCT83_73EN_eng.book 96 ページ ２０１３年７月１８日 木曜日 午前１０時２８分
Praktiske funktioner
Netværk
Tryk på [OK] for at starte nem netværks opsæt-
ning. (a 24)
Vælg LAN-forbindelse metode.
Dette gør det muligt at indstille og kontrollere
forbindelses indstillingerne for trådløse router.
fx
Kontroller tilslutningen af netværket eller
indstille IP-adressen og DNS.
• For at indstille IP-adressen og DNS
1 Indstil “IP Address Auto-assignment” og
“DNS-IP Auto-assignment” til “Off”
2 Vælg elementet, og tryk derefter på [OK]
for at vise den pågældende indstilling.
• Når routerens DHCP-server funktion ikke er
aktiveret, tjek antallet af andre tilsluttede
enheder, såsom personlig computere, tildel
et IP-nummer forskelligt fra de andre enhed-
ers “IP-adresser” og tildele det samme
nummer for “Subnet Mask” og “Gateway
Address”.
Kontroller og indstil forbindelsen til proxy server.
• Tryk på [OK] for at vise den pågældende
indstilling.
Lydstyrken justeres automatisk til standard
volumen, mens du bruger VIERA Connect.
• Afhængigt af indholdet, vil denne funktion
ikke virke.
• Vælg “Off”, hvis lyden er forvrænget.
Du kan begrænse brug af VIERA Connect.
• PIN er påkrævet for at foretage ændringer. (a 27)
Wireless router connection wizard vil blive
vist.
Krypterings type
Signal modtagelse
Type af trådløs router
Når en 2,4 GHz trådløs format bruges,
indstiller denne indstilling forbindelsens
hastighed.
• Hvis du tilslutter ved hjælp af “Double
Speed Mode (40MHz) “, 2 kanaler bruger
samme frekvensbånd, og der er markant
øget risiko for modtagelses interferens.
Dette kan medføre at forbindelsens
hastigheden falder eller at forbindelse
bliver ustabil.
Basisindstillinger