Operating Instructions

Recording
VQT5D92
39
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 37)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 01.01.2013 8:05
Delete
Info
New Timer Programme
MON 07.01
MON 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
MON 07.01
TUE 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 37).
Displayed if timer recording of two
encrypted programmes is overlapping.
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 120)
- programmes are deactivated, etc.
DMR-BCT83_73EN_eng.book 39 ページ ２０１３年７月１８日 木曜日 午前１０時２８分
For at bekræfte og redigere et timer
program
1 Tryk på [PROG/CHECK].
fx
2 Vælg et program, udfør derefter ændringerne.
For at deaktivere et timer-program
Tryk på den røde knap.
• Timeren ikonet “
Recording
VQT4G51
38
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD SUN 01.01.2012 8:05
Delete
Info
New Timer Programme
SAT 07.01
SAT 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
SAT 07.01
SUN 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 36).
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 117)
- programmes are deactivated, etc.
DMR-BCT820_720_721EG_eng.book 38 ページ ２０１２年８月１日 水曜日 午後５時１８分
” skifter fra rød til gråt.
• Tryk på den røde knap igen for at aktivere
timeren optagestandby. (Timer-ikonet “
Recording
VQT4G51
38
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD SUN 01.01.2012 8:05
Delete
Info
New Timer Programme
SAT 07.01
SAT 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
SAT 07.01
SUN 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 36).
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 117)
- programmes are deactivated, etc.
DMR-BCT820_720_721EG_eng.book 38 ページ ２０１２年８月１日 水曜日 午後５時１８分
”
vil skift til rød.)
Hvis du vil slette et timer-program
Tryk på [DEL].
For at redigere et timer-program
1 Tryk på [OK].
2 Ændring af timer indspilningsindstillinger.
• Se “Timer optagelse indstillinger”.
(
a
37)
3 Tryk på [OK].
For at vise program informationen
Tryk på [STATUS
Watching broadcasts
VQT4G51
28
Watching broadcasts
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press [OK].
3 Select “View”, then press [OK].
Page up/down
Press [CH WX].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS ].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
• Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 35)
• If you make access to Rovi Guide via VIERA Connect, you
can use an additional TV Guide which can search
programmes by keywords and can display the detailed
information, etc. (current as of July, 2012). (> 77)
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 37)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
7 Data service (Hybrid Broadcast Broadband
TV) (> 29)
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
Using TV Guide system
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
SUN 01.01
TV Guide
8:00 - 9:45
SUN 01.01.2012 8:05 Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
Using channel information
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 88)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer


 
e.g.,
DMR-BCT820_720_721EG_eng.book 28 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
For at forlade timeroptagelseslisten
Tryk på [EXIT U]
Rød: timeroptagelses standby er aktiveret.
Grey: Timer-optagelses standby er
deaktiveret.
Kopibeskyttet program
Det blev ikke optaget.
En del af eller hele programmet vil ikke
blive optaget da programmerne overlapper
hinanden.
Optagelsen af programmet blev ikke
fuldført af en eller anden grund.
Vises hvis optagelsen kan være på den
resterende plads
Dagligt eller ugentligt timer program er
indstillet.
Det kan muligvis ikke optages fordi:
- Der ikke nok plads til tilbage.
- Antallet af mulige titler har nået sit
maksimum. (
a
120)
- Programmet er deaktiveret, etc.
Vises hvis timer-optagelse af to kryptere-
de programmer er overlappende (Når
“optagelse for Krypteret kanal” er indstillet
til “Dekrypter Recording” kun) En del af
eller hele programmet ikke vil blive optaget
efter som de krypterede programmer er
overlappende.
Igangværende optagelse
HDD er fuld.
Auto Fornyet optagelse er indstillet (
a
37)
Skærmikonerne
Optagelse