Operating Instructions

Getting started
VQT5D92
23
10Select the item to match the type of TV
connected.
For details, refer to “TV Aspect”. (> 94)
When “Easy Setting has been completed.”
appears, Easy Setting is complete.
• Select “Yes” to proceed to “Easy Network
Setting”. (> 24)
• Select “No” to finish the Easy Setting.
You need to set “Preferred Language” after
completing “Easy Setting” or “Easy Network
Setting”.
1 Press [FUNCTION MENU]. (> 21)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Preferred Language” in “DVB Tuning”,
then press [OK].
4 Refer to page 87, “Preferred Language”.
To stop partway
Press [RETURN ].
To restart setup
1 Press [FUNCTION MENU]. (> 21)
2 Select “Basic Settings” in “Setup”, then press
[OK].
3 Select “Auto Setup” in “DVB Tuning”, then
press [OK].
4 Select “Yes”, then press [OK].
• If you are asked to select the auto setup
method, refer to “Auto Setup”. (> 86)
To confirm that channels have been tuned
correctly
Refer to “Using Channel List”. (> 28)
• If tuning is cancelled partway through, it may not be
possible to receive the channels. Restart setup again.
Preferred Language
DMR-BCT83_73EN_eng.book 23 ページ ２０１３年７月１８日 木曜日 午前１０時２８分
10 Vælg det punkt, der passer til den tilsluttede
TV-type.
For detaljer henvises til “TV Aspect”. (
a
94)
Når “Easy Setting has been completed.” vises, er
den nemme indstilling gennemført.
•
Vælg “Yes” for at fortsætte til “Easy Network
Setting”. (
a
24)
•
Vælg “No” for at afslutte indstillingen.
Du skal indstille “Preferred Language” efter at have
gennemført “Easy Setting” eller “Easy Network
Setting”.
1
Tryk på [FUNCTION MENU]. (
a
21)
2
Vælg “Basic Settings” i “Setup”, og tryk derefter
på [OK].
3
Vælg “Preferred Language” i “DVB Tuning”, og
tryk derefter på [OK].
4
Se side 87, “Preferred Language”.
For at stoppe halvvejs
Tryk på [RETURN
Editing video
VQT4G51
53
[HDD]
Encrypted titles ( ) can be decrypted manually.
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
• For decryption, the CI module that supports the programme
is necessary.
• Depending on the programme, playback/decryption may
not be possible.
• During decryption, do not remove the CI module from this
unit.
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 41)
• The maximum number of chapters:
(Depends on the state of recording.)
[HDD] [USB_HDD]: Approx. 1000 per title
[BD-RE] [BD -R] [RAM]: Approx. 1000 per disc
• [HDD] [USB_HDD] When the title has the maximum number of
chapters, you cannot perform the Resume play function
(> 39) or the “Changing thumbnail” (> 51) with the title.
• This function cannot be used on encrypted titles ( ).
File Decryption
1 Select “File Decryption” in “Edit”, then press
[OK].
2 Select whether to delete the original title or
not, then press [OK].
• Yes
The original title will be deleted to save HDD
capacity after decryption.
• No
The original title remains after decryption.
3 Select “Start”, then press [OK].
Decryption starts.
“Decrypting” appears during decryption.
• When a title that is copy protected (One
generation copy is permitted) is selected, the
original title will be deleted after decryption.
(> 15)
• When a decryption fails, the screen icon
( ) is changed to “ ”.
HDD
Decrypting
Editing chapters
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN ] to go to Chapter View
screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
DMR-BCT820_720_721EG_eng.book 53 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
Hvis du vil genstarte indstillingen
1 Tryk på [FUNCTION MENU]. (
a
21)
2
Vælg “Basic Settings” i “Setup”, og tryk derefter
på [OK].
3
Vælg “Auto Setup” i “DVB Tuning”, og tryk
derefter på [OK]. (
a
89)
4
Vælg “Yes”, og tryk derefter på [OK].
• Hvis du bliver bedt om at vælge automatisk
opsætningsmetode, se “Auto Setup”. (
a
86)
For at bekræfte at kanalerne er indstillet korrekt
Se “Brug kanalliste”. (
a
28)
• Hvis kanalindstillingen afbrydes halvvejs igennem, vil
det ikke være muligt at modtage kanalerne. Genstart
installationsprogrammet.
Kom godt i gang
Foretrukket sprog