Operating Instructions

Convenient functions
SQT0351
91
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select “Off” when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select “Off” when you do not want to use
“HDAVI Control”.
Common Interface
Access to software contained on CI module.
(> 14)
• Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when “TV
System” is set to “NTSC” (> 90).
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 22)
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select “Wired”.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
1 Encryption type
2 Reception
3 Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Wireless Settings
Double Speed Mode Setting ( 2.4GHz )
Connection Setting
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
( SSID )
Wireless type
802.11n (5GHz/20MHz)
Authentication type
Encryption type
AES
Connected
Reception
  
DMR-BCT84_74EN_eng.book 91 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
91
Deep Colour Output
This setting is for selecting whether to use
Deep Colour output when a TV that supports
Deep Colour is connected.
HDMI Audio Output
Select “Off” when connected to an
amplifier/receiver with a DIGITAL AUDIO
OUT terminal.
Contents Type Flag
If “Automatic” is selected, the optimal method
of playback depending on the TV (e.g.
cinema) will automatically be selected (only
when the TV supports Contents Type Flag).
VIERA Link
Select “Off” when you do not want to use
“HDAVI Control”.
Common Interface
Access to software contained on CI module.
(> 14)
• Select “Slot 1:” or “Slot 2:” and press [OK].
Follow the on-screen instructions.
• This setting cannot be made when “TV
System” is set to “NTSC” (> 90).
• On-screen instructions may not correspond to the remote
control buttons.
• For more information about TV service, please contact
your service provider.
• Depending on the card, in some cases its use together
with this unit may be limited or not possible.
Network
Easy Network Setting
Press [OK] to start Easy Network Setting. (> 22)
Network Settings
LAN Connection Mode
Select the LAN connection method.
• When not using wireless LAN (when turning
it off), select “Wired”.
Wireless Settings
This allows to set and check the connection
settings of the Wireless router.
e.g.,
1 Encryption type
2 Reception
3 Type of wireless router
Connection Setting
The Wireless router connection wizard will
be displayed.
Double Speed Mode Setting ( 2.4GHz )
When a 2.4 GHz wireless format is used,
this setting sets the connection speed.
• If you connect using the “Double Speed
Mode (40MHz)”, 2 channels use the
same frequency band, and there is
consequently a greater risk of reception
interference. This can cause the
connection speed to drop or the
connection to become unstable.
Wireless Settings
Double Speed Mode Setting ( 2.4GHz )
Connection Setting
Current connection settings
The current connection settings and status are
displayed.
Connection status
Current status
Network name
( SSID )
Wireless type
802.11n (5GHz/20MHz)
Authentication type
Encryption type
AES
Connected
Reception
  
DMR-BCT84_74EN_eng.book 91 ページ ２０１４年７月２４日 木曜日 午後５時３分
Praktiske funktioner
Denne indstilling vælger om du vil bruge Deep
Colour udgang, når et TV, der understøtter
Deep Colour, er tilsluttet.
Vælg “Off” ved tilslutning til en forstærker/re-
ceiver med DIGITAL AUDIO OUT-terminalen.
Hvis “Automatic” er valgt, vil den optimale
metode for afspilningen afhængigt af TV’et
(f.eks biograf) automatisk blive valgt (kun når
TV’et understøtter Contents Type Flag).
Vælg “Off”, når du ikke ønsker at bruge
“HDAVI Control”.
Adgang til software, som findes på CI-modulet.
(a 14)
• Vælg “Slot 1:” eller “Slot 2:” og tryk på [OK].
Følg vejledningen på skærmen.
• Denne indstilling kan ikke foretages, når “TV
System“ er indstillet til ”NTSC“(a 90).
• On-screen instruktionerne svarer muligvis ikke til fjern-
betjeningens knapper.
• For yderligere oplysninger om TV-tjeneste, skal du kontakte
din tjenesteudbyder.
• Afhængigt af kortet, kan det i nogle tilfælde ikke anvendes
sammen med denne enhed, eller vil være begrænset i brug.
Netværk
Tryk på [OK] for at starte nem netværks
opsætning. (a 22)
Vælg LAN-forbindelse metode.
• Når du ikke bruger trådløst LAN (har slået
det fra), vælg ”Wired”.
Dette gør det muligt at indstille og kontrollere
forbindelses indstillingerne for trådløse router.
fx
Wireless router connection wizard vil blive
vist.
Krypterings type
Signal modtagelse
Type af trådløs router
Når en 2,4 GHz trådløs format bruges,
indstiller denne indstilling forbindelsens
hastighed.
• Hvis du tilslutter ved hjælp af “Double
Speed Mode (40MHz) “, 2 kanaler bruger
samme frekvensbånd, og der er markant
øget risiko for modtagelses interferens.
Dette kan medføre at forbindelsens
hastigheden falder eller at forbindelse
bliver ustabil.
SQT0351 91