Operating Instructions

Convenient functions
SQT0351
88
Basic Settings
Picture
Still Mode
Select the type of picture shown when you pause
play.
• Field:
Select if jittering occurs when “Automatic” is
selected. (The picture is coarser.)
• Frame:
Select if small text or fine patterns cannot be
seen clearly when “Automatic” is selected.
(The picture is clearer and finer.)
Sound
Dynamic Range Compression
To lower the dynamic range for playback (e.g., at
night).
• This does not work depending on broadcasts
and recorded titles.
Downmix
Select the downmix system of multi-channel to
2-channels sound.
• Select “Surround encoded”, when the
connected equipment supports the virtual
surround function.
• There is no effect on “Bitstream” via HDMI AV
OUT and DIGITAL AUDIO OUT terminal.
• The audio will be output in “Stereo” in the
following cases.
- AVCHD playback
- [BD-V] : Playback of clicking sound on the
menu and audio with secondary video in
picture-in-picture mode.
Bilingual Audio Selection
Select whether to record the audio type (“M1” or
“M2”) when:
- File Conversion (> 52)
- Copying to a DVD-R, DVD-RW, +R and +RW.
Digital Audio Output
PCM Down Conversion
Select how to output audio with a sampling
frequency of 96 kHz.
• On:
Signals are converted to 48 kHz.
(Choose when the connected equipment
cannot process signals with a sampling
frequency of 96 kHz.)
• Off:
Signals are output as 96 kHz.
• The signals will be converted to 48 kHz
regardless of the setting in the following
cases.
- The signals have a sampling frequency
of over 96 kHz.
- The disc has copy protection.
- “BD-Video Secondary Audio” is set to
“On”. ([BD-V]) (> 88)
Dolby D / Dolby D + / Dolby TrueHD
DTS / DTS-HD
MPEG
Select the audio signal to output.
• Select “PCM” when the connected
equipment cannot decode the respective
audio format.
• Not making the proper settings may result in
noise.
BD-Video Secondary Audio
Turn on/off the clicking sound on the menu
and audio with secondary video.
[BCT84]
HDMI Output Settings of Music Playback
Select the HDMI output settings.
• If “Sound Quality Priority” is selected, the audio
noise is minimised during music playback by
automatically switching the video output to
1080i.
DMR-BCT84_74EN_eng.book 88 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
89
[BCT84]
Settings for High Clarity Sound
You can set “Audio Output” and “Front Panel
Display” when “High Clarity Sound” (> 81) is set
to “On (Video Off)” or “On(Video On)”.
Audio Output
Select a terminal that will stop processing
audio signals.
• Set an option for video playback and audio
playback.
Front Panel Display
Select whether or not to turn on/off the front
panel display.
• Set an option for video playback and audio
playback.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in the following
cases.
- Timer recording (> 34)
- File Conversion (> 52)
- Normal speed copy in HG, HX, HE, HL or HM
mode from a title recorded in DR mode.
(> 56, 59)
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 27) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 93), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 28) display mode.
DMR-BCT84_74EN_eng.book 89 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
89
[BCT84]
Settings for High Clarity Sound
You can set “Audio Output” and “Front Panel
Display” when “High Clarity Sound” (> 81) is set
to “On (Video Off)” or “On(Video On)”.
Audio Output
Select a terminal that will stop processing
audio signals.
• Set an option for video playback and audio
playback.
Front Panel Display
Select whether or not to turn on/off the front
panel display.
• Set an option for video playback and audio
playback.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in the following
cases.
- Timer recording (> 34)
- File Conversion (> 52)
- Normal speed copy in HG, HX, HE, HL or HM
mode from a title recorded in DR mode.
(> 56, 59)
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 27) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 93), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 28) display mode.
DMR-BCT84_74EN_eng.book 89 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
89
[BCT84]
Settings for High Clarity Sound
You can set “Audio Output” and “Front Panel
Display” when “High Clarity Sound” (> 81) is set
to “On (Video Off)” or “On(Video On)”.
Audio Output
Select a terminal that will stop processing
audio signals.
• Set an option for video playback and audio
playback.
Front Panel Display
Select whether or not to turn on/off the front
panel display.
• Set an option for video playback and audio
playback.
Audio Delay
Mis-sync between the video and audio is
corrected by delaying the audio output.
Audio for HG / HX / HE / HL / HM Recording
If the programme has multi channel audio,
priority is given to what you select.
• This setting will give effect in the following
cases.
- Timer recording (> 34)
- File Conversion (> 52)
- Normal speed copy in HG, HX, HE, HL or HM
mode from a title recorded in DR mode.
(> 56, 59)
Display
Language
Select the language for on-screen menus.
On-Screen Information
Select the time until the channel information
screen (> 27) disappears automatically.
Front Panel Display
Changes the brightness of the front panel
display.
• If “Automatic” is selected, the display turns dark
during play and disappears when the unit is in
standby mode. While using this mode, the
standby power consumption can be reduced.
• When “Quick Start” is set to “Off” or “Timer
Setting for Quick Start” (> 93), this function is
fixed to “Automatic”.
Screen Saver
This is to prevent burn-in on the screen.
Teletext
Select the Teletext (> 28) display mode.
DMR-BCT84_74EN_eng.book 89 ページ ２０１４年７月２４日 木曜日 午後５時３分
Praktiske funktioner
Hvis programmet har multikanallyd, prioriteres
hvad du vælger.
• Denne indstilling vil have effekt i det følgende
tilfælde.
- Timer optagelse (a 34)
- File Conversion (a 52)
- Normal speed copy i HG, HX, HE, HL eller HM
mode fra en titel der optaget i DR-tilstand.
(a 56, 59)
Mis-sync mellem video og lyd kan korrigeres ved
at forsinke lydudgangen.
Du kan indstille “Audio Output” og “Front Panel
Display”, når “High Clarity Sound” (a 81) er sat til
“On (Video Off)” eller “On (Video On)”.
Vælg en terminal, som ikke skal behandle
audiosignaler.
• Vælg en indstilling til videoafspilning og
audioafspilning.
Vælg om displayet på frontpanelet skal lyse
eller ikke.
• Vælg en indstilling til videoafspilning og
audioafspilning.
Vælg sproget til menuer på skærmen.
Vælg tiden før at kanal informations skærmen
(a 27) automatisk forsvinder
Dette er for at forhindre indbrænding på skærmen.
Vælg Tekst-TV (a 28) visningstilstand.
Teletext
Ændrer lysstyrken på apparatets display.
• Hvis “Automatic” er valgt, bliver skærmen mørk
under afspilning og forsvinder, når enheden er i
standbytilstand. Når du bruger denne tilstand,
kan standby-forbrug reduceres.
• Når “Power Save i Standby” er indstillet til “On”
eller “On Timer” (a 93), er denne funktion
fastindstillet til “Automatisk”.
SQT0351 89