Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsDMRBCT74EN

Convenient functions

SQT0351

Basic Settings

DVB Tuning

Favourites Edit

You can create four favourites of channels for

making viewing and recording easier.

After editing as follows, save the Favourites.

Press [RETURN ], then press [OK].

• To select the other Favourites list:

Press the green button.

• To add channels to the Favourites list:

Select the channel in the “All DVB Channels”

column, then press [OK]. Repeat this step.

• Red: Change the sorting mode.

• Yellow: Add continuous block of channels to

the list at once.

• Press [3, 4] to make the block, then press

[OK].

• Blue: Select the Category.

• To change the order of the channels list:

1 Select the channel in the “Favourites”

column to move, then press the green

button.

2 Select the new position, then press the

green button.

• To delete channels:

Select the channel in the “Favourites” column,

then press [OK].

• Yellow: Delete all channels.

• To change the name of the Favourites list:

1 Press the red button in the “Favourites”

column.

2 Press [3, 4, 2, 1] to select a character,

then press [OK].

Repeat this step to enter other characters.

• Red: Delete a character.

• Blue: Delete all characters.

3 Press [RETURN ].

Auto Setup

You can restart the Auto Setup. (> 21)

1 Select “Yes”, then press [OK].

• If the country selection screen appears:

Select the country, then press [OK].

2 Follow the on-screen instructions and make

the following settings.

1 Select “Preset Channel Number” or

“Operator’s Channel Number ( LCN )”,

then press [OK].

2 Select the items and change the items.

(For details, consult the cable provider.)

Search Mode

• All Channels

Search for all channels.

• Free Channels

Search for free channels only.

Scan Mode

• Quick:

Scans the suitable frequency for the

selected country.

• Full:

Scans the whole frequency range.

Frequency/Symbol Rate/Network ID

Normally set to “Auto”.

If “Auto” is not displayed or if necessary,

enter the value specified by your cable

provider with number buttons.

3 Select “Start scan”, then press [OK].

Auto Setup starts.

• The timer recording programmes are cancelled.

DMR-BCT84_74EN_eng.book 84 ページ２０１４年７月２４日　木曜日　午後５時３分

Convenient functions

SQT0351

Settings for DVB-C Channels

Channel List

You can edit the channel list.

• To hide/reveal channels

1 Select the channel.

2 Press [OK].

The check mark is removed/displayed.

• Red: Change the sorting mode.

• Yellow: Reveal all channels.

• Blue: Change the Category.

• To change the channel number assignment

1 Select the channel to change, then press

the green button.

2 Enter the channel number to reassign

with the number buttons.

3 Press [OK].

Manual Tuning

You can add new channels manually.

1 Adjust the frequency, symbol rate and

service ID. (For details, consult the cable

provider.)

• Adjust the frequency by checking the

signal strength and signal quality

displays.

2 Select “Start scan”, then press [OK].

• The set channel is displayed in the table.

• This function is not available during an Operator

profile update. (> 28)

Update Channel List

You can update the channel list to the latest

one.

• This function is not available during an Operator

profile update. (> 28)

Signal Condition

You can check the quality and strength of

signals.

Press [CH WX] to select the channel.

• When the signal is too strong (red bar), reduce the

CATV signal. (For details, consult your dealer or the

cable provider.)

• When the signal is weak, check that the current

broadcast channel is correctly broadcasting.

New Channel Message

Set whether to obtain the information

automatically when a new DVB channel is

added.

Child Lock

• PIN is required to change. (> 25)

Child Lock List

You can restrict the viewing of channels and

playback of titles. You can lock each channel

or AV input.

1 Select the channel or AV input to lock.

2 Press [OK].

is displayed.

• Press [OK] again to cancel.

• Green: Lock all channels.

• Yellow: Unlock all channels.

Parental Rating

You can restrict the viewing and recording of

channels unsuitable to children.

Set a ratings level to limit broadcast viewing

and playback.

• Follow the on-screen instructions.

Preferred Language

Select the language for multi broadcast.

If the selected language is not available, the

original language will be selected.

DMR-BCT84_74EN_eng.book 85 ページ２０１４年７月２４日　木曜日　午後５時３分

Convenient functions

SQT0351

Basic Settings

DVB Tuning

Favourites Edit

You can create four favourites of channels for

making viewing and recording easier.

After editing as follows, save the Favourites.

Press [RETURN ], then press [OK].

• To select the other Favourites list:

Press the green button.

• To add channels to the Favourites list:

Select the channel in the “All DVB Channels”

column, then press [OK]. Repeat this step.

• Red: Change the sorting mode.

• Yellow: Add continuous block of channels to

the list at once.

• Press [3, 4] to make the block, then press

[OK].

• Blue: Select the Category.

• To change the order of the channels list:

1 Select the channel in the “Favourites”

column to move, then press the green

button.

2 Select the new position, then press the

green button.

• To delete channels:

Select the channel in the “Favourites” column,

then press [OK].

• Yellow: Delete all channels.

• To change the name of the Favourites list:

1 Press the red button in the “Favourites”

column.

2 Press [3, 4, 2, 1] to select a character,

then press [OK].

Repeat this step to enter other characters.

• Red: Delete a character.

• Blue: Delete all characters.

3 Press [RETURN ].

Auto Setup

You can restart the Auto Setup. (> 21)

1 Select “Yes”, then press [OK].

• If the country selection screen appears:

Select the country, then press [OK].

2 Follow the on-screen instructions and make

the following settings.

1 Select “Preset Channel Number” or

“Operator’s Channel Number ( LCN )”,

then press [OK].

2 Select the items and change the items.

(For details, consult the cable provider.)

Search Mode

• All Channels

Search for all channels.

• Free Channels

Search for free channels only.

Scan Mode

• Quick:

Scans the suitable frequency for the

selected country.

• Full:

Scans the whole frequency range.

Frequency/Symbol Rate/Network ID

Normally set to “Auto”.

If “Auto” is not displayed or if necessary,

enter the value specified by your cable

provider with number buttons.

3 Select “Start scan”, then press [OK].

Auto Setup starts.

• The timer recording programmes are cancelled.

DMR-BCT84_74EN_eng.book 84 ページ２０１４年７月２４日　木曜日　午後５時３分

Praktiske funktioner

Basisindstillinger

Du kan oprette fire favoritlister af kanaler for at gøre

visning og optagelse lettere.

• Hvis du vil vælge en anden Favoritliste:

Tryk på den grønne knap.

• For at tilføje kanaler til Favoritlisten:

Vælg kanalen i “All DVB Channels” kolonnen, og

tryk derefter på [OK]. Gentag dette trin.

• Rød: Skift sorteringsmetode.

• Gul: Tilføj ubrudt blok af kanaler til listen på en

gang.

• Tryk på [▲, ▼] for at lave blokken, og tryk

derefter på [OK].

• Blå: Vælg Kategori.

• Hvis du vil ændre rækkefølgen af kanalerne i

listen:

1 Vælg den kanal i “Favourites” kolonne til at

flytte, og tryk derefter på den grønne knap.

2 Vælg den nye position, og tryk derefter på

den grønne knap.

• For at slette kanaler:

Vælg kanalen i “Favourites” kolonnen, og tryk

derefter på [OK].

• Gul: Slet alle kanaler.

• For at ændre navnet på favoritlisten:

1 Tryk på den røde knap i “Favourites” kolonnen.

2 Tryk på [▲, ▼, ◄, ►] for at vælge et tegn, og

tryk derefter på [OK].

Gentag dette trin for at indtaste andre tegn.

• Rød: Slet et tegn.

• Blå: Slet alle tegn.

3 Tryk på [RETURN

Editing video

VQT4G51

[HDD]

Encrypted titles ( ) can be decrypted manually.

To cancel the decryption

Press and hold [RETURN ] for more than

3 seconds.

• For decryption, the CI module that supports the programme

is necessary.

• Depending on the programme, playback/decryption may

not be possible.

• During decryption, do not remove the CI module from this

unit.

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

1 Select “Chapter View”, then press [OK].

2 Perform the editing operations.

Playback from Chapter View

Refer to “Playback from Chapter View”. (> 41)

• The maximum number of chapters:

(Depends on the state of recording.)

[HDD] [USB_HDD]: Approx. 1000 per title

[BD-RE] [BD -R] [RAM]: Approx. 1000 per disc

• [HDD] [USB_HDD] When the title has the maximum number of

chapters, you cannot perform the Resume play function

(> 39) or the “Changing thumbnail” (> 51) with the title.

• This function cannot be used on encrypted titles ( ).

File Decryption

1 Select “File Decryption” in “Edit”, then press

[OK].

2 Select whether to delete the original title or

not, then press [OK].

• Yes

The original title will be deleted to save HDD

capacity after decryption.

• No

The original title remains after decryption.

3 Select “Start”, then press [OK].

Decryption starts.

“Decrypting” appears during decryption.

• When a title that is copy protected (One

generation copy is permitted) is selected, the

original title will be deleted after decryption.

(> 15)

• When a decryption fails, the screen icon

( ) is changed to “ ”.

HDD

Decrypting

Editing chapters

Edit Chapter Mark:

Select the point where you want to start a new

chapter while viewing the title.

1 Press the green button.

2 Press [OK] at the point you want to divide.

• Repeat this step.

3 Press [RETURN ] to go to Chapter View

screen.

To delete the chapter:

1 Select the chapter, then press [DEL].

Multiple editing

Select the chapter, then press the yellow

button.

A check mark is displayed. Repeat this

step.

• Press the yellow button again to cancel.

2 Select “Delete”, then press [OK].

To combine chapters (Delete chapter

mark):

1 Select the chapter, then press [OPTION].

2 Select “Combine Chapters”, then press

[OK].

3 Select “Combine”, then press [OK].

The selected chapter is combined to the

next chapter.

DMR-BCT820_720_721EG_eng.book 53 ページ２０１２年８月１日　水曜日　午後５時１８分

Når du har redigeret således, kan du gemme

Favoritlister.

Tryk på [RETURN

Editing video

VQT4G51

Editing recorded titles

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM] [+R] [+RW]

Protection setting prevents the title from

accidental deletion.

• This function cannot be used on encrypted titles ( ).

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

• This function cannot be used on encrypted titles ( ).

[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]

To confirm the division point

After performing step 2.

Select “Preview”, then press [OK].

• The unit plays 10 seconds before and after the

division point.

To change the division point

After performing step 2.

Restart play and select “Divide”, then press [OK]

at the division point.

• [HDD] [USB_HDD] Divided titles will become a group of titles.

• This function cannot be used on encrypted titles ( ).

Setting protection

1 Select “Set up Protection” or “Cancel

Protection” in “Edit”, then press [OK].

2 Select “Yes”, then press [OK].

appears when setting the protection.

Partial deleting

1 Select “Partial Delete” in “Edit”, then press

[OK].

2 Press [OK] at the start point and end point to

delete.

• You can find the desired point by using play,

search, etc. (> 44)

3 Select “Continue”, then press [OK].

• Select “Next”, then press [OK] to delete other

sections. Up to 20 sections can be set.

(> go to step 2)

4 Select “Delete”, then press [OK].

• Chapter Mark is generated in the scene that

was partially deleted.

5 Press [RETURN ].

Start Time

Prog.Type:

Rec time

Social/Economic

MovieNot Viewed

Channel Date Title Name

All

Movie

9:00

Dividing title

1 Select “Divide Title” in “Edit”, then press [OK].

2 Press [OK] at the point to divide the title.

• You can find the desired point by using play,

search, etc. (> 44)

3 Select “Continue”, then press [OK].

4 Select “Divide”, then press [OK].

DMR-BCT820_720_721EG_eng.book 50 ページ２０１２年８月１日　水曜日　午後５時１８分

], og tryk derefter på [OK].

Getting started

SQT0351

You can use an external HDD in the following two

ways. (A single HDD cannot handle those two

ways simultaneously.)

• For recorded titles

Moving titles in the built-in HDD to a USB HDD

to save the capacity of the built-in HDD.

• The USB HDD must first be registered on this

unit. (> 77)

• For data files

Playing back MP4, JPEG, MP3, etc. (data files)

in a USB HDD with this unit.

• The USB HDD must be formatted in FAT12,

FAT16, FAT32 and NTFS file system.

• The USB HDD over 2 TB is not usable.

• This unit supports USB 2.0 High Speed.

• Although this unit can use USB 3.0 devices as USB 2.0

devices, in certain cases USB 3.0 devices cannot be used

due to differing connector shape, larger current ratings, etc.

(Use of USB 2.0 devices is recommended.)

• This unit does not recognise USB HDDs other than those in

which the size of one sector is 512-bytes or 4096-bytes.

(For details, consult the dealer of your USB HDD.)

• This unit does not guarantee connection with all USB

devices.

• Region management information

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

• Disc recorded on another device

• It may be necessary to finalize the disc, create

Top Menu or close the session on the

equipment used for recording to play on this

unit.

• [DVD-RW] Recorded in DVD Video Recording

(DVD-VR) format

- This unit can play back and copy to HDD.

- This unit does not support editing or

recording.

- It is possible to record and edit with

DVD-Video (DVD-V) format by formatting

discs with this unit.

• Recording may not be possible to discs which

were used for recording on other equipment.

• Play on other players

• [BD-RE] [BD-R] When these discs cannot be

played back on other Blu-ray Disc players, etc.

(e.g., title recorded with HE-AAC audio

format), convert the recording mode to play

them back. (> 52, File Conversion)

• [DVD-R] [DVD-RW] [+R] Finalisation is needed.

(> 99)

• [+RW] If the disc failed to play on other

equipment, we recommend you create a Top

Menu (> 99).

• [DVD-R] The disc created in AVCHD format can

only be played back on AVCHD compatible

equipment.

• Regarding 8 cm Disc

This unit cannot record or edit the 8 cm disc.

Only playback or copy to the HDD is possible.

• Discs that cannot be played

- DVD-RAM that cannot be removed from their cartridges

- 2.6 and 5.2 GB DVD-RAM, 12 cm

- DVD-Audio

- HD DVD

- Super Video CD, Super Audio CD, Video CD

- CD-ROM, Photo CD, PD, etc.

• Operation and sound quality of CDs that do not conform to

CD-DA specifications (copy control CDs, etc.) cannot be

guaranteed.

Notes

Notes for an External HDD (USB HDD)

Notes for the disc

e.g., BD-Video DVD-Video

DMR-BCT84_74EN_eng.book 9 ページ２０１４年７月２４日　木曜日　午後５時３分

• Timeroptagelsesprogrammer bliver annulleret.

DVB Tuning

Du kan genstarte Auto Setup. (a 21)

1 Vælg “Yes”, og tryk derefter på [OK].

• Hvis valg af land vises:

Vælg land, og tryk derefter på [OK].

2 Følg instruktionerne på skærmen og foretag de

følgende indstillinger.

1 Vælg ”Preset Channel Number” eller

”Operator’s Channel Number (LCN)”,

og tryk derefter på [OK].

2 Valg og ændring af punkter.

(For nærmere oplysninger, kontakt kabel-

udbyderen.)

Search Mode

• All Channels

Søg efter alle kanaler.

• Free Channels

Søg udelukkende efter gratis kanaler.

Scan Mode

• Quick:

Scanner den egnede frekvens for det valgte

land.

• Full:

Scanner hele frekvensområdet.

Frequency / Symbol Rate / Network ID

Normalt indstillet til “Auto”.

Hvis “Auto” ikke vises, eller hvis det er

nødvendigt, indtast den værdi, der oplyses af

din kabeludbyder med talknapperne.

3 Vælg “Start Scan”, og tryk derefter på [OK].

SQT035184