Operating Instructions

Convenient functions
SQT0351
81
• The menu is not displayed when playing photos.
Picture Settings
Picture Type
§2
Select the picture type.
Sharpness Adjustment
Adjusts the sharpness of images. The greater
the value is, the sharper images will be.
Noise Reduction
Reduces unnecessary noise in videos. The
greater the value is, the less noise will appear.
Luminance / Colour Adjustment
Adjusts the contrast, brightness, white
gamma, black gamma, colour saturation and
hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
24p/25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “HDMI Video Format” set to “Automatic”,
“1080i
§
” or “1080p
§
” (> 90)
§
Only for 24p Conversion
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Sound Effect Settings
§2
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Re-master 1-3
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Digital Tube Sound 1-6
This feature gives you a warm sound, like
that produced by a vacuum tube amplifier.
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
Sound Settings
Sound Effects
§3
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround (>
81)
Re-master 1-2 (>
81)
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
High Clarity Sound
§2
Stop processing signals that affect the audio
quality or turn off the front panel display to
make the audio quality clearer.
Select whether or not to output images.
This setting is able to switch by pressing the
yellow button during playing music.
3D Settings
Signal Format (>
49)
3D Picture Mode (>
49)
Manual Settings (>
49)
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
§2
[BCT84] only
§3
[BCT74] only
DMR-BCT84_74EN_eng.book 81 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
81
• The menu is not displayed when playing photos.
Picture Settings
Picture Type
§2
Select the picture type.
Sharpness Adjustment
Adjusts the sharpness of images. The greater
the value is, the sharper images will be.
Noise Reduction
Reduces unnecessary noise in videos. The
greater the value is, the less noise will appear.
Luminance / Colour Adjustment
Adjusts the contrast, brightness, white
gamma, black gamma, colour saturation and
hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
24p/25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “HDMI Video Format” set to “Automatic”,
“1080i
§
” or “1080p
§
” (> 90)
§
Only for 24p Conversion
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Sound Effect Settings
§2
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Re-master 1-3
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Digital Tube Sound 1-6
This feature gives you a warm sound, like
that produced by a vacuum tube amplifier.
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
Sound Settings
Sound Effects
§3
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround (>
81)
Re-master 1-2 (>
81)
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
High Clarity Sound
§2
Stop processing signals that affect the audio
quality or turn off the front panel display to
make the audio quality clearer.
Select whether or not to output images.
This setting is able to switch by pressing the
yellow button during playing music.
3D Settings
Signal Format (>
49)
3D Picture Mode (>
49)
Manual Settings (>
49)
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
§2
[BCT84] only
§3
[BCT74] only
DMR-BCT84_74EN_eng.book 81 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
81
• The menu is not displayed when playing photos.
Picture Settings
Picture Type
§2
Select the picture type.
Sharpness Adjustment
Adjusts the sharpness of images. The greater
the value is, the sharper images will be.
Noise Reduction
Reduces unnecessary noise in videos. The
greater the value is, the less noise will appear.
Luminance / Colour Adjustment
Adjusts the contrast, brightness, white
gamma, black gamma, colour saturation and
hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
24p/25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “HDMI Video Format” set to “Automatic”,
“1080i
§
” or “1080p
§
” (> 90)
§
Only for 24p Conversion
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Sound Effect Settings
§2
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Re-master 1-3
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Digital Tube Sound 1-6
This feature gives you a warm sound, like
that produced by a vacuum tube amplifier.
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
Sound Settings
Sound Effects
§3
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround (>
81)
Re-master 1-2 (>
81)
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
High Clarity Sound
§2
Stop processing signals that affect the audio
quality or turn off the front panel display to
make the audio quality clearer.
Select whether or not to output images.
This setting is able to switch by pressing the
yellow button during playing music.
3D Settings
Signal Format (>
49)
3D Picture Mode (>
49)
Manual Settings (>
49)
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
§2
[BCT84] only
§3
[BCT74] only
DMR-BCT84_74EN_eng.book 81 ページ ２０１４年７月２４日 木曜日 午後５時３分
Convenient functions
SQT0351
81
• The menu is not displayed when playing photos.
Picture Settings
Picture Type
§2
Select the picture type.
Sharpness Adjustment
Adjusts the sharpness of images. The greater
the value is, the sharper images will be.
Noise Reduction
Reduces unnecessary noise in videos. The
greater the value is, the less noise will appear.
Luminance / Colour Adjustment
Adjusts the contrast, brightness, white
gamma, black gamma, colour saturation and
hue.
Bandwidth Limitation
Adjusts the bandwidth limitations.
24p/25p Conversion
Plays back videos with film-like motion.
• This function is available on the following
conditions:
- “HDMI Video Format” set to “Automatic”,
“1080i
§
” or “1080p
§
” (> 90)
§
Only for 24p Conversion
- Connect 24p/25p compatible TV.
• Noise may appear on the image when you
switch the setting.
Progressive
Select the method of conversion for
progressive output to suit the type of title being
played.
• Auto
Automatically detects the film and video
content, and appropriately converts it.
• Video
Select this setting when the content is
distorted if “Auto” is selected.
• Film
Select this if the edges of the
film content appear jagged or
rough when “Auto” is
selected. However, if the
video content is distorted as shown in the
illustration to the right, then select “Auto”.
Reset to Default Picture Settings
Restores the default settings of the Picture
Settings menu.
Sound Effect Settings
§2
Sound Effects
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround
Enjoy a movie with powerful sound even
when the volume is kept low at night.
Re-master 1-3
Sound becomes more natural by adding
higher frequency signals not recorded on
the track.
Digital Tube Sound 1-6
This feature gives you a warm sound, like
that produced by a vacuum tube amplifier.
Sound Effect Frequency
Set the maximum sampling frequency for the
audio selected in “Sound Effects”.
Sound Settings
Sound Effects
§3
• This function is effective when “Digital Audio
Output” is set to “PCM”. (> 88)
Night Surround (>
81)
Re-master 1-2 (>
81)
Dialogue Enhancer
The volume of the centre channel is raised to
make dialogue easier to hear.
High Clarity Sound
§2
Stop processing signals that affect the audio
quality or turn off the front panel display to
make the audio quality clearer.
Select whether or not to output images.
This setting is able to switch by pressing the
yellow button during playing music.
3D Settings
Signal Format (>
49)
3D Picture Mode (> 49)
Manual Settings (>
49)
Graphic Display Level
You can change the 3D position of the
playback settings display, etc., during the 3D
playback.
§2
[BCT84] only
§3
[BCT74] only
DMR-BCT84_74EN_eng.book 81 ページ ２０１４年７月２４日 木曜日 午後５時３分
Videoindstillinger Videoindstillinger
Justerer billedernes skarphed. Jo højere værdi,
desto skarpere bliver billederne.
Vælg billedtype.
Denne funktion er aktiv, når “Digital Audio
Output “er indstillet til “PCM”. (a 88)
Nyd en film med kraftfuld lyd, selv om lyd-
styrken holdes lav, fx om natten.
Lyden bliver mere naturlig ved at tilføje
højere signalfrekvenser, der ikke er optaget
på nummeret.
Denne funktion giver dig en varm lyd
– ligesom fra en forstærker med rør.
Indstiller den maksimale samplingfrekvens for
den lyd, som vælges i ”Sound Effects”.
Afbryder behandling af signaler, som kan
påvirke lydkvaliteten, eller slukker displayet på
frontpanelet for at gøre lydkvaliteten klarere.
Vælg om billeder skal gengives eller ikke.
Denne indstilling kan ændres ved at trykke på
den gule knap under afspilning af musik.
Reducerer uønsket støj i videoer. Jo højere
værdi, desto mindre synlig bliver støjen.
Justerer kontrast, lysstyrke, hvid gamma, sort
gamma, farvemætning og tone.
Afspiller video med filmlignende bevægelse.
• Denne funktion er tilgængelig på de følgende
betingelser:
- ”HDMI Video Format” sat til ”Automatic”,
”1080i*” eller ”1080p*” (a 90)
* Kun for 24p Conversion
- Et 24p/25p kompatibelt TV er tilsluttet.
• Støj kan optræde i billedet, når du skifter
indstillingen.
Justerer båndbredde begrænsningerne.
Sætter enheden tilbage til standardindstill-
ingerne i Picture Settings menuen.
Vælg en konverteringsmetode til progressivt
output, så det passer til den type titel, der
afspilles.
Detekterer automatisk film- og videoindhold,
og konverterer det.
Vælg denne indstilling, når indholdet er
forvrænget, hvis “Auto” er valgt.
Vælg denne indstilling, hvis
kanterne på filmindholdet vis-
es ujævne eller ru, når “Auto”
er valgt. Men hvis videoind-
holdet forvrænges som vist i
illustrationen til højre, vælg da “Auto”.
Lydindstillinger
Lydindstillinger
Denne funktion er aktiv, når “Digital Audio
Output “er indstillet til “PCM”. (a 88)
Volumen i centerkanalen hæves, for at gøre
dialogen nemmere at høre.
Du kan ændre 3D position for afspilning
indstillingsskærm osv. under 3D-gengivelse.
Getting started
SQT0351
9
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (> 77)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit does not guarantee connection with all USB
devices.
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Disc recorded on another device
• It may be necessary to finalize the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio
format), convert the recording mode to play
them back. (> 52, File Conversion)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 99)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 99).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
- DVD-RAM that cannot be removed from their cartridges
- 2.6 and 5.2 GB DVD-RAM, 12 cm
- DVD-Audio
- HD DVD
- Super Video CD, Super Audio CD, Video CD
- CD-ROM, Photo CD, PD, etc.
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
Notes
Notes for an External HDD (USB HDD)
Notes for the disc
e.g., BD-Video DVD-Video
DMR-BCT84_74EN_eng.book 9 ページ ２０１４年７月２４日 木曜日 午後５時３分
• Menuen vises ikke ved visning af fotos.
Kun
BCT84
Kun
BCT74
SQT0351 81