Operating Instructions

Editing video
SQT0351
52
Deleting/Editing recorded titles
[HDD] [USB_HDD]
File Conversion is a function to convert the
recording mode of the title in DR mode and
AVCHD contents. The size of the converted title
will be small regularly. It will take about the same
time as the recorded duration.
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 50, Editing)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
File Conversion
1 Select “File Conversion” in “Edit”, then press
[OK].
e.g.,
2 Set the conversion options, then press [OK].
Recording Mode (>
8):
• [USB_HDD] You cannot select XP, SP, LP and
EP mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the title, and will not be recorded if they are
not included.
• Off
Subtitle will not be recorded.
Timing:
• Now
Conversion begins immediately after step 4.
• Timer recording will not be performed
during conversion.
• If an encrypted title ( ) is included, “Now”
cannot be selected.
• During standby
Conversion will be performed after the unit is
switched to standby mode.
File Conversion
Convert the selected title by changing its recording mode.
Please select recording mode and other options, then press OK.
RETURN
Subtitles Off
Recording Mode HL -- Longer Play
Timing During standby
OK
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
• The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 15)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“Copy” or “Conversion” on the front panel
display remains lighted during conversion.
• If the title is encrypted ( ), conversion
will start after decryption.
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
9:00 0:01(DR HL)
04.10
04.10
29.10
29.10
DMR-BCT84_74EN_eng.book 52 ページ ２０１４年７月２４日 木曜日 午後５時３分
Editing video
SQT0351
52
Deleting/Editing recorded titles
[HDD] [USB_HDD]
File Conversion is a function to convert the
recording mode of the title in DR mode and
AVCHD contents. The size of the converted title
will be small regularly. It will take about the same
time as the recorded duration.
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 50, Editing)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
File Conversion
1 Select “File Conversion” in “Edit”, then press
[OK].
e.g.,
2 Set the conversion options, then press [OK].
Recording Mode (>
8):
• [USB_HDD] You cannot select XP, SP, LP and
EP mode.
Subtitles:
• Automatic
Subtitles will be recorded if they are included
in the title, and will not be recorded if they are
not included.
• Off
Subtitle will not be recorded.
Timing:
• Now
Conversion begins immediately after step 4.
• Timer recording will not be performed
during conversion.
• If an encrypted title ( ) is included, “Now”
cannot be selected.
• During standby
Conversion will be performed after the unit is
switched to standby mode.
File Conversion
Convert the selected title by changing its recording mode.
Please select recording mode and other options, then press OK.
RETURN
Subtitles Off
Recording Mode HL -- Longer Play
Timing During standby
OK
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
• The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 15)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“Copy” or “Conversion” on the front panel
display remains lighted during conversion.
• If the title is encrypted ( ), conversion
will start after decryption.
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
9:00 0:01(DR HL)
04.10
04.10
29.10
29.10
DMR-BCT84_74EN_eng.book 52 ページ ２０１４年７月２４日 木曜日 午後５時３分
Redigering af video
Sletning/Redigering af optagede titler
3 Vælg det punkt, og tryk derefter på [OK].
Convert & Delete:
Den oprindelige titel vil blive slettet for at spare
HDD kapacitet efter konverteringen.
Convert Only:
Den oprindelige titel forbliver tilbage efter
konvertering.
• Den oprindelige titel vil blive slettet efter fil
Conversion, hvis den valgte titel er angivet
med
Editing video
VQT4G51
52
Editing recorded titles
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 49)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
• Teletext will not be recorded.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Language” (> 90)
- “Subtitles” of “Preferred Language” (> 90)
- Audio for HG / HX / HE / HL / HM Recording (> 95)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 36)
set, a programme may be unintentionally converted while in
“During standby”.
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
• The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 15)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“COPY” or “CONV” on the unit’s display
remains lighted during conversion.
• If the title is encrypted ( ), conversion
will start after decryption.
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
9:00 0:01(DR HL)
04/10
04/10
29/10
29/10
DMR-BCT820_720_721EG_eng.book 52 ページ ２０１２年８月１日 水曜日 午後５時１８分
. (a 15)
4 “Now” conversion:
Vælg “Start”, og tryk derefter på [OK].
“During standby” conversion:
Tryk på [OK].
• Konvertering vil blive udført efter at enheden
er skiftet til standby.
“COPY” eller “CONV” på apparatets display
forbliver tændt under konvertering.
• Hvis titlen er krypteret (
Playing back video
VQT4G51
44
Operation during play
• Depending on the media and the type of file, some
operations may not be possible.
• Depending on the media, it may take time for the menu
screen, pictures, sound, etc. to start.
• Discs continue to rotate while menus are displayed. Press
[STOP ∫] when you have finished playback to protect the
unit’s motor, your TV screen, etc.
• Titles that are copy protected (Copying is prohibited) cannot
be viewed going back in time more than the allowed
playback period. (> 15)
Press [STATUS ] twice.
e.g.,
Press [STOP ∫].
Press and hold [PLAY/a1.3 1].
• Press again to return to normal speed.
• DivX, MKV, MP4 and MPEG2 ([USB]): Quick View is not
effective.
• Quick View is not effective when playing back the DVD-RW
disc.
• Quick View may not work when recording in XP or FR
mode.
• Quick View cannot be used on encrypted titles ( ).
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
([+R] [+RW]: Up to 3 steps)
• DivX, MKV, MP4 and MPEG2 ([USB]): Audio is not heard
during all levels search.
Press [PAUSE ;].
• Press [PLAY/a1.3 1] to restart play.
While paused, press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
• DivX, MKV, MP4 and MPEG2 ([USB]): Slow-motion is not
effective.
• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction
[SLOW/SEARCH 5] only.
• Slow-motion cannot be used on encrypted titles ( ).
General operations
Status messages
Stop
Resume play function
Press [PLAY/a1.3 1] to restart from the stopped
position.
• The resume play function does not work
depending on the disc.
• Stopped position
[HDD] [USB_HDD], AVCHD ([SD]):
Stopped position for each title is memorized.
Discs:
Only previous stopped position is memorized.
The position may be cleared if the tray is
opened or the unit is switched to standby mode.
8:05:50 01.01.2012
T1 0:05.14 DR
0:30.00
Remain HDD
Quick View
Search
Pause
Slow-motion
DMR-BCT820_720_721EG_eng.book 44 ページ ２０１２年８月１日 水曜日 午後５時１８分
), vil
konverteringen starter efter dekryptering.
Hvis du vil annullere en “Now” konvertering
Tryk og hold [RETURN
Editing video
VQT4G51
53
[HDD]
Encrypted titles ( ) can be decrypted manually.
To cancel the decryption
Press and hold [RETURN ] for more than
3 seconds.
• For decryption, the CI module that supports the programme
is necessary.
• Depending on the programme, playback/decryption may
not be possible.
• During decryption, do not remove the CI module from this
unit.
[HDD] [USB_HDD] [BD-RE] [BD-R] [RAM]
1 Select “Chapter View”, then press [OK].
2 Perform the editing operations.
Playback from Chapter View
Refer to “Playback from Chapter View”. (> 41)
• The maximum number of chapters:
(Depends on the state of recording.)
[HDD] [USB_HDD]: Approx. 1000 per title
[BD-RE] [BD -R] [RAM]: Approx. 1000 per disc
• [HDD] [USB_HDD] When the title has the maximum number of
chapters, you cannot perform the Resume play function
(> 39) or the “Changing thumbnail” (> 51) with the title.
• This function cannot be used on encrypted titles ( ).
File Decryption
1 Select “File Decryption” in “Edit”, then press
[OK].
2 Select whether to delete the original title or
not, then press [OK].
• Yes
The original title will be deleted to save HDD
capacity after decryption.
• No
The original title remains after decryption.
3 Select “Start”, then press [OK].
Decryption starts.
“Decrypting” appears during decryption.
• When a title that is copy protected (One
generation copy is permitted) is selected, the
original title will be deleted after decryption.
(> 15)
• When a decryption fails, the screen icon
( ) is changed to “ ”.
HDD
Decrypting
Editing chapters
Edit Chapter Mark:
Select the point where you want to start a new
chapter while viewing the title.
1 Press the green button.
2 Press [OK] at the point you want to divide.
• Repeat this step.
3 Press [RETURN ] to go to Chapter View
screen.
To delete the chapter:
1 Select the chapter, then press [DEL].
Multiple editing
Select the chapter, then press the yellow
button.
A check mark is displayed. Repeat this
step.
• Press the yellow button again to cancel.
2 Select “Delete”, then press [OK].
To combine chapters (Delete chapter
mark):
1 Select the chapter, then press [OPTION].
2 Select “Combine Chapters”, then press
[OK].
3 Select “Combine”, then press [OK].
The selected chapter is combined to the
next chapter.
DMR-BCT820_720_721EG_eng.book 53 ページ ２０１２年８月１日 水曜日 午後５時１８分
] i mere end 3 sekunder.
For at bekræfte om konverteringen er afsluttet
Tryk på [DIRECT NAVIGATOR].
f.eks.
Når “
Editing video
VQT4G51
52
Editing recorded titles
To cancel a “Now” conversion
Press and hold [RETURN ] for more than
3 seconds.
To confirm whether the conversion is
completed
Press [DIRECT NAVIGATOR].
e.g.,
When “±± > ±± (Recording mode for
conversion)” is displayed, the conversion has not
finished.
To cancel a “During standby” conversion
After performing steps 1–3 (> 49)
1 Select “File Conversion” in “Edit”, then press
[OK].
2 Select “Yes”, then press [OK].
• To use “File Conversion”, the HDD needs enough storage
capacity.
• The size of converted title might increase depending on the
title.
• Teletext will not be recorded.
• File Conversion is stopped when this unit is turned on
during performing “During standby” conversion. Conversion
will start from the beginning again once the unit is switched
to standby mode.
• When converted, the audio content and subtitle language
will be selected according to the following settings:
- “Multi Audio” of “Preferred Language” (> 90)
- “Subtitles” of “Preferred Language” (> 90)
- Audio for HG / HX / HE / HL / HM Recording (> 95)
• When converted, 3D information may not be retained.
• In titles with the Auto Renewal Recording function (> 36)
set, a programme may be unintentionally converted while in
“During standby”.
3 Select the item, then press [OK].
Convert & Delete:
The original title will be deleted to save HDD
capacity after conversion.
Convert Only:
The original title remains after conversion.
• The original title will be deleted after File
Conversion, if the selected title is indicated
with . (> 15)
4 “Now” conversion:
Select “Start”, then press [OK].
“During standby” conversion:
Press [OK].
• Conversion will be performed after the unit is
switched to standby mode.
“COPY” or “CONV” on the unit’s display
remains lighted during conversion.
• If the title is encrypted ( ), conversion
will start after decryption.
Start Time
Prog.Type:
Rec time
Channel Date Title Name Titles
Movie
9:00 0:01(DR HL)
04/10
04/10
29/10
29/10
DMR-BCT820_720_721EG_eng.book 52 ページ ２０１２年８月１日 水曜日 午後５時１８分
(optagetilstand for
konvertering) “vises, er konverteringen ikke færdig.
File Conversion
HDD USB HDD
Filkonvertering er en funktion til at konvertere
optagetilstand af titlen i DR-tilstand og AVCHD
indhold. Størrelsen af den konverterede titel vil
være mindre. Det vil tage omkring det samme tid
som optagelsens varighed.
1 Vælg “File Conversion” i “Edit”, og tryk derefter
på [OK].
f.eks.
2 Indstil konverteringsindstillinger, og tryk derefter
på [OK].
Recording Mode (a 8):
•
USB HDD
Du kan ikke vælge XP, SP, LP og
EP-indstilling.
Subtitles:
• Automatic
Undertekster vil blive optaget, hvis de indgår
i titlen, og vil ikke blive registreret, hvis de
ikke er inkluderet.
• Off
Subtitle vil ikke blive optaget.
Timing:
• Now
Konvertering begynder umiddelbart efter trin 4.
• Timer-optagelse vil ikke blive udført under
konvertering.
• Hvis en krypteret titel (
Playing back video
VQT4G51
44
Operation during play
• Depending on the media and the type of file, some
operations may not be possible.
• Depending on the media, it may take time for the menu
screen, pictures, sound, etc. to start.
• Discs continue to rotate while menus are displayed. Press
[STOP ∫] when you have finished playback to protect the
unit’s motor, your TV screen, etc.
• Titles that are copy protected (Copying is prohibited) cannot
be viewed going back in time more than the allowed
playback period. (> 15)
Press [STATUS ] twice.
e.g.,
Press [STOP ∫].
Press and hold [PLAY/a1.3 1].
• Press again to return to normal speed.
• DivX, MKV, MP4 and MPEG2 ([USB]): Quick View is not
effective.
• Quick View is not effective when playing back the DVD-RW
disc.
• Quick View may not work when recording in XP or FR
mode.
• Quick View cannot be used on encrypted titles ( ).
Press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
([+R] [+RW]: Up to 3 steps)
• DivX, MKV, MP4 and MPEG2 ([USB]): Audio is not heard
during all levels search.
Press [PAUSE ;].
• Press [PLAY/a1.3 1] to restart play.
While paused, press [SLOW/SEARCH 6] or
[SLOW/SEARCH 5].
• Press [PLAY/a1.3 1] to restart play.
• The speed increases up to 5 steps.
• DivX, MKV, MP4 and MPEG2 ([USB]): Slow-motion is not
effective.
• [BD-V], AVCHD ([DVD-R] [SD]): Forward direction
[SLOW/SEARCH 5] only.
• Slow-motion cannot be used on encrypted titles ( ).
General operations
Status messages
Stop
Resume play function
Press [PLAY/a1.3 1] to restart from the stopped
position.
• The resume play function does not work
depending on the disc.
• Stopped position
[HDD] [USB_HDD], AVCHD ([SD]):
Stopped position for each title is memorized.
Discs:
Only previous stopped position is memorized.
The position may be cleared if the tray is
opened or the unit is switched to standby mode.
8:05:50 01.01.2012
T1 0:05.14 DR
0:30.00
Remain HDD
Quick View
Search
Pause
Slow-motion
DMR-BCT820_720_721EG_eng.book 44 ページ ２０１２年８月１日 水曜日 午後５時１８分
) er inkluderet,
kan”Now” ikke vælges.
• During standby
Konvertering vil blive udført efter at enheden
er skiftet til standby.
Hvis du vil annullere en “During standby”
konvertering
Efter udførelse af trin 1-3 (a 50)
1 Vælg “File Conversion” i “Edit”, og tryk derefter
på [OK].
2 Vælg “Yes”, og tryk derefter på [OK].
Getting started
SQT0351
9
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (> 77)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit does not guarantee connection with all USB
devices.
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Disc recorded on another device
• It may be necessary to finalize the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio
format), convert the recording mode to play
them back. (> 52, File Conversion)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 99)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 99).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
- DVD-RAM that cannot be removed from their cartridges
- 2.6 and 5.2 GB DVD-RAM, 12 cm
- DVD-Audio
- HD DVD
- Super Video CD, Super Audio CD, Video CD
- CD-ROM, Photo CD, PD, etc.
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
Notes
Notes for an External HDD (USB HDD)
Notes for the disc
e.g., BD-Video DVD-Video
DMR-BCT84_74EN_eng.book 9 ページ ２０１４年７月２４日 木曜日 午後５時３分
• For at bruge “File Conversion”, skal der være nok lagerplads
på HDD kapacitet.
SQT035152