Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsDMRBCT74EN

Playing back video

SQT0351

Playing titles on the HDD

1 Select the group, then press [OPTION].

2 Select “Edit”, then press [OK].

3 Select “Enter Title Name”, then press [OK].

4 Refer to “Entering text”. (> 99)

To edit the chapter in Chapter View

Refer to “Editing chapters”. (> 53)

Editing the grouped titles

1 Select the title or the group, then press the

yellow button.

• A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

• If you will perform “Remove”, select the title

in the group.

2 Press [OPTION].

3 Select the item, then press [OK].

Create Group:

Selected titles are bundled to form a group.

Select “Create”, then press [OK].

Release Grouping:

All the titles in the group are released.

Select “Release”, then press [OK].

Remove:

Selected titles are removed from the group.

Select “Remove”, then press [OK].

Changing the group name

Playback from Chapter View

Regarding chapters

You can divide a title into multiple chapters. Each

section between the division points (Chapter

Marks) becomes a chapter.

• Chapter Creation

This unit can create chapters automatically

while recording broadcasting. (> 87)

• If the title is recorded in the encrypted form, the chapter

will be created only after the title is decrypted.

1 Select the title, then press [OPTION].

2 Select “Chapter View”, then press [OK].

e.g., [HDD]

3 Select the chapter, then press [OK].

Chapter

Title

Chapter Marks

Press OK to start playing from

the selected chapter.

Selected chapter can be edited

via OPTION.

Press RETURN to go back to

previous menu.

Page 001/001

0:00.00

001

0:12.29

Play

SelectEdit Chapter Mark

Play

RETURN

Delete

DMR-BCT84_74EN_eng.book 42 ページ２０１４年７月２４日　木曜日　午後５時３分

Playing back video

SQT0351

Playing titles on the HDD

1 Select the group, then press [OPTION].

2 Select “Edit”, then press [OK].

3 Select “Enter Title Name”, then press [OK].

4 Refer to “Entering text”. (> 99)

To edit the chapter in Chapter View

Refer to “Editing chapters”. (> 53)

Editing the grouped titles

1 Select the title or the group, then press the

yellow button.

• A check mark is displayed. Repeat this step.

• Press the yellow button again to cancel.

• If you will perform “Remove”, select the title

in the group.

2 Press [OPTION].

3 Select the item, then press [OK].

Create Group:

Selected titles are bundled to form a group.

Select “Create”, then press [OK].

Release Grouping:

All the titles in the group are released.

Select “Release”, then press [OK].

Remove:

Selected titles are removed from the group.

Select “Remove”, then press [OK].

Changing the group name

Playback from Chapter View

Regarding chapters

You can divide a title into multiple chapters. Each

section between the division points (Chapter

Marks) becomes a chapter.

• Chapter Creation

This unit can create chapters automatically

while recording broadcasting. (> 87)

• If the title is recorded in the encrypted form, the chapter

will be created only after the title is decrypted.

1 Select the title, then press [OPTION].

2 Select “Chapter View”, then press [OK].

e.g., [HDD]

3 Select the chapter, then press [OK].

Chapter

Title

Chapter Marks

Press OK to start playing from

the selected chapter.

Selected chapter can be edited

via OPTION.

Press RETURN to go back to

previous menu.

Page 001/001

0:00.00

001

0:12.29

Play

SelectEdit Chapter Mark

Play

RETURN

Delete

DMR-BCT84_74EN_eng.book 42 ページ２０１４年７月２４日　木曜日　午後５時３分

Afspilning af video

Redigering af grupperede titler Afspilning fra Chapter View

Ændring af gruppenavn

Hvis du vil redigere kapitel i Chapter View

Se “Redigering af kapitler”. (

53)

1 Vælg titel eller gruppe, og tryk derefter på den

gule knap.

• En markering vises. Gentag dette trin.

• Tryk på den gule knap igen for at annullere.

• Hvis du udfører “Remove”, skal du vælge

titlen i gruppen.

2 Tryk på [OPTION].

3 Vælg punktet, og tryk derefter på [OK].

Opret gruppe:

Udvalgte titler bundtet til en gruppe.

Vælg “Create”, og tryk derefter på [OK].

Slip Gruppering:

Alle titler i gruppen er frigivet.

Vælg “Release”, og tryk derefter på [OK].

Fjern:

Udvalgte titler fjernet fra gruppen.

Vælg “Remove”, og tryk derefter på [OK].

1 Vælg den gruppe, og tryk derefter på

[OPTION].

2 Vælg “Edit”, og tryk derefter på [OK].

3 Vælg “Enter Title Name”, og tryk derefter på

[OK].

4 Se “Indtastning af tekst”. (

99)

Med hensyn til kapitler

Du kan opdele en titel i flere kapitler. Hvert sek-

tion mellem delingspunkterne (Chapter Marks)

bliver et kapitel.

• Kapitel Oprettelse

Denne enhed kan oprette kapitler automatisk

mens du optager udsendelser. (

87)

Getting started

SQT0351

You can use an external HDD in the following two

ways. (A single HDD cannot handle those two

ways simultaneously.)

• For recorded titles

Moving titles in the built-in HDD to a USB HDD

to save the capacity of the built-in HDD.

• The USB HDD must first be registered on this

unit. (> 77)

• For data files

Playing back MP4, JPEG, MP3, etc. (data files)

in a USB HDD with this unit.

• The USB HDD must be formatted in FAT12,

FAT16, FAT32 and NTFS file system.

• The USB HDD over 2 TB is not usable.

• This unit supports USB 2.0 High Speed.

• Although this unit can use USB 3.0 devices as USB 2.0

devices, in certain cases USB 3.0 devices cannot be used

due to differing connector shape, larger current ratings, etc.

(Use of USB 2.0 devices is recommended.)

• This unit does not recognise USB HDDs other than those in

which the size of one sector is 512-bytes or 4096-bytes.

(For details, consult the dealer of your USB HDD.)

• This unit does not guarantee connection with all USB

devices.

• Region management information

The unit can play back BD-Video/DVD-Video

discs of the following regions codes, including

“ALL”:

• Disc recorded on another device

• It may be necessary to finalize the disc, create

Top Menu or close the session on the

equipment used for recording to play on this

unit.

• [DVD-RW] Recorded in DVD Video Recording

(DVD-VR) format

- This unit can play back and copy to HDD.

- This unit does not support editing or

recording.

- It is possible to record and edit with

DVD-Video (DVD-V) format by formatting

discs with this unit.

• Recording may not be possible to discs which

were used for recording on other equipment.

• Play on other players

• [BD-RE] [BD-R] When these discs cannot be

played back on other Blu-ray Disc players, etc.

(e.g., title recorded with HE-AAC audio

format), convert the recording mode to play

them back. (> 52, File Conversion)

• [DVD-R] [DVD-RW] [+R] Finalisation is needed.

(> 99)

• [+RW] If the disc failed to play on other

equipment, we recommend you create a Top

Menu (> 99).

• [DVD-R] The disc created in AVCHD format can

only be played back on AVCHD compatible

equipment.

• Regarding 8 cm Disc

This unit cannot record or edit the 8 cm disc.

Only playback or copy to the HDD is possible.

• Discs that cannot be played

- DVD-RAM that cannot be removed from their cartridges

- 2.6 and 5.2 GB DVD-RAM, 12 cm

- DVD-Audio

- HD DVD

- Super Video CD, Super Audio CD, Video CD

- CD-ROM, Photo CD, PD, etc.

• Operation and sound quality of CDs that do not conform to

CD-DA specifications (copy control CDs, etc.) cannot be

guaranteed.

Notes

Notes for an External HDD (USB HDD)

Notes for the disc

e.g., BD-Video DVD-Video

DMR-BCT84_74EN_eng.book 9 ページ２０１４年７月２４日　木曜日　午後５時３分

• Hvis titlen er optaget i krypteret form, vil kapitlet først

blive skabt, når titlen er dekrypteret.

1 Vælg titelen, og tryk derefter på [OPTION].

2 Vælg “Chapter View”, og tryk derefter på [OK].

f.eks.

HDD

3 Vælg et kapitel, og tryk derefter på [OK].

Afspilning af titler på HDD

SQT035142