Operating Instructions

Recording
SQT0351
37
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
[BCT84]
• Programmes to be recorded with Keyword recording (> 38)
are not displayed.
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 35)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 07.01.2014 8:05
Delete
Info
Keyword List
New Timer Programme
MON 13.01
MON 13.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
MON 13.01
TUE 07.01
DR
HG
DR
DR
OK
OK
e.g., [BCT84]
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 35).
Displayed if timer recording of two
encrypted programmes is overlapping.
(When “Recording for Encrypted Channel”
is set to “Decryption Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 112)
- programmes are deactivated, etc.
DMR-BCT84_74EN_eng.book 37 ページ ２０１４年７月２４日 木曜日 午後５時３分
Recording
SQT0351
37
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
[BCT84]
• Programmes to be recorded with Keyword recording (> 38)
are not displayed.
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 35)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD TUE 07.01.2014 8:05
Delete
Info
Keyword List
New Timer Programme
MON 13.01
MON 13.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
MON 13.01
TUE 07.01
DR
HG
DR
DR
OK
OK
e.g., [BCT84]
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 35).
Displayed if timer recording of two
encrypted programmes is overlapping.
(When “Recording for Encrypted Channel”
is set to “Decryption Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 112)
- programmes are deactivated, etc.
DMR-BCT84_74EN_eng.book 37 ページ ２０１４年７月２４日 木曜日 午後５時３分
For at bekræfte og redigere et timer
program
1 Tryk på [PROG/CHECK].
f.eks.
For at forlade timeroptagelseslisten
Tryk på [EXIT U]
Rød: timeroptagelses standby er aktiveret.
Grey: Timer-optagelses standby er
deaktiveret.
Kopibeskyttet program
Det blev ikke optaget.
En del af eller hele programmet vil ikke
blive optaget da programmerne overlapper
hinanden.
Optagelsen af programmet blev ikke
fuldført af en eller anden grund.
Vises hvis optagelsen kan være på den
resterende plads
Dagligt eller ugentligt timer program er
indstillet.
Det kan muligvis ikke optages fordi:
- Der ikke nok plads til tilbage.
- Antallet af mulige titler har nået sit
maksimum. (
a
112)
- Programmet er deaktiveret, etc.
Vises hvis timer-optagelse af to kryptere-
de programmer er overlappende (Når
“optagelse for Krypteret kanal” er indstillet
til “Dekrypter Recording” kun) En del af
eller hele programmet ikke vil blive optaget
efter som de krypterede programmer er
overlappende.
Igangværende optagelse
HDD er fuld.
Auto Renewal optagelse er indstillet (
a
35)
Skærmikonerne
Optagelse
Getting started
SQT0351
9
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (> 77)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit does not guarantee connection with all USB
devices.
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Disc recorded on another device
• It may be necessary to finalize the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio
format), convert the recording mode to play
them back. (> 52, File Conversion)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 99)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 99).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
- DVD-RAM that cannot be removed from their cartridges
- 2.6 and 5.2 GB DVD-RAM, 12 cm
- DVD-Audio
- HD DVD
- Super Video CD, Super Audio CD, Video CD
- CD-ROM, Photo CD, PD, etc.
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
Notes
Notes for an External HDD (USB HDD)
Notes for the disc
e.g., BD-Video DVD-Video
DMR-BCT84_74EN_eng.book 9 ページ ２０１４年７月２４日 木曜日 午後５時３分
BCT84
• Programmer, som skal optages med Keyword optagelse
(
a
38), vises ikke.
2 Vælg et program, udfør derefter ændringerne.
For at deaktivere et timer-program
Tryk på den røde knap.
• Timeren ikonet “
Recording
VQT4G51
38
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD SUN 01.01.2012 8:05
Delete
Info
New Timer Programme
SAT 07.01
SAT 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
SAT 07.01
SUN 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 36).
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 117)
- programmes are deactivated, etc.
DMR-BCT820_720_721EG_eng.book 38 ページ ２０１２年８月１日 水曜日 午後５時１８分
” skifter fra rød til gråt.
• Tryk på den røde knap igen for at aktivere
timeren optagestandby. (Timer-ikonet “
Recording
VQT4G51
38
Timer recording
1 Press [PROG/CHECK].
2 Select the programme, then perform the
operations.
To exit the timer recording list
Press [EXIT ].
To confirm and edit a timer
programme
To deactivate a timer programme
Press the red button.
• The timer icon “F” will change from red to
grey.
• Press the red button again to activate timer
recording standby. (The timer icon “F” will
change to red.)
To delete a timer programme
Press [DEL].
To edit a timer programme
1 Press [OK].
2 Change the timer recording options.
• Refer to “Timer recording options”.
(> 36)
3 Press [OK].
To show programme information
Press [STATUS ].
Channel Name
Schedule
Mode
Space
OK
RETURN
Page Up
Page Down
Turn
Timer Off
Total 3/32
Timer Recording
30:30 DRHDD SUN 01.01.2012 8:05
Delete
Info
New Timer Programme
SAT 07.01
SAT 07.01
10:00 - 11:50
11:00 - 11:45
11:30 - 1:00
8:00 - 10:45
SAT 07.01
SUN 01.01
DR
HG
DR
DR
OK
OK
e.g.,
Screen icons
F
Red: Timer recording standby is activated.
Grey: Timer recording standby is
deactivated.
[
Currently recording programme
A part or all of the programme will not be
recorded since the programme is
overlapping.
The HDD is full.
Copy-protected programme
It was not recorded.
The recording of the programme was not
completed because of some reason.
Auto Renewal Recording is set (> 36).
Displayed if timer recording of two
encrypted programmes is overlapping
(When “Recording for Encrypted Channel”
is set to “Decrypt Recording” only)
A part or all of the programme will not be
recorded since the encrypted programme
is overlapping.
OK
Displayed if the recording can fit in the
remaining space
(Date)
Daily or weekly timer programme is set.
!
It may not be possible to record because:
- there is not enough space left.
- the number of possible titles has
reached its maximum. (> 117)
- programmes are deactivated, etc.
DMR-BCT820_720_721EG_eng.book 38 ページ ２０１２年８月１日 水曜日 午後５時１８分
”
vil skift til rød.)
Hvis du vil slette et timer-program
Tryk på [DEL].
For at redigere et timer-program
1 Tryk på [OK].
2 Ændring af timer indspilningsindstillinger.
• Se “Timer optagelse indstillinger”.
(
a
35)
3 Tryk på [OK].
For at vise program informationen
Tryk på [STATUS
Watching broadcasts
VQT4G51
28
Watching broadcasts
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press [OK].
3 Select “View”, then press [OK].
Page up/down
Press [CH WX].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS ].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
• Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 35)
• If you make access to Rovi Guide via VIERA Connect, you
can use an additional TV Guide which can search
programmes by keywords and can display the detailed
information, etc. (current as of July, 2012). (> 77)
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 37)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
7 Data service (Hybrid Broadcast Broadband
TV) (> 29)
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
Using TV Guide system
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
SUN 01.01
TV Guide
8:00 - 9:45
SUN 01.01.2012 8:05 Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
Using channel information
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 88)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer


 
e.g.,
DMR-BCT820_720_721EG_eng.book 28 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
SQT0351 37