Operating Instructions

Watching broadcasts
SQT0351
27
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 36)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
When “ ” appears in channel information
(> 27)
Press [STTL ].
• Press again to hide subtitle.
• Some subtitle contents can be displayed using Teletext.
(> 28)
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
Using channel information
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 84)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer



e.g.,
Operations while watching broadcast
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT ] to exit the screen.
Switching audio
DMR-BCT84_74EN_eng.book 27 ページ ２０１４年７月２４日 木曜日 午後５時３分
Se TV-udsendelser
Brug af kanalinformation Betjening mens du ser en udsendelse
For at vise detaljerede oplysninger
Tryk på [STATUS
Watching broadcasts
VQT4G51
28
Watching broadcasts
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press [OK].
3 Select “View”, then press [OK].
Page up/down
Press [CH WX].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS ].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
• Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 35)
• If you make access to Rovi Guide via VIERA Connect, you
can use an additional TV Guide which can search
programmes by keywords and can display the detailed
information, etc. (current as of July, 2012). (> 77)
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 37)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
7 Data service (Hybrid Broadcast Broadband
TV) (> 29)
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
Using TV Guide system
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
SUN 01.01
TV Guide
8:00 - 9:45
SUN 01.01.2012 8:05 Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
Using channel information
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 88)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer


 
e.g.,
DMR-BCT820_720_721EG_eng.book 28 ページ ２０１２年８月１日 水曜日 午後５時１８分
] igen.
Hvis du vil skjule informationsskærmen
Tryk [EXIT U].
For at ændre kategori
Tryk på den blå knap.
• For at registrere dine yndlingskanaler
1
Tryk på [OPTION].
2
Vælg “Digital TV Menu”, og tryk derefter på
[OK].
3 Vælg “Favourites Edit”, og tryk derefter på [OK].
4 Se “Foretrukne Redigering”. (
a
84)
Du kan skifte mellem det nuværende program
og det næste program
Tryk på [◄, ►].
For at skifte til en anden kanal
Tryk på [▲, ▼], og tryk derefter på [OK].
Mens du ser et program
Tryk på [STATUS
Watching broadcasts
VQT4G51
28
Watching broadcasts
1 Press [GUIDE].
TV Guide screen appears.
2 Select the programme, then press [OK].
3 Select “View”, then press [OK].
Page up/down
Press [CH WX].
To view a programme list for another day
Press the green button (Previous) or the yellow
button (Next).
To see programme information
Press [STATUS ].
To retrieve the programme data for the area
where data have not been acquired
Select the area, then press [STATUS ].
• Some broadcasters may not send the
programme data. You cannot retrieve the data
from them.
To set a timer Recording using the TV Guide
System
Refer to “Timer recording”. (> 35)
• If you make access to Rovi Guide via VIERA Connect, you
can use an additional TV Guide which can search
programmes by keywords and can display the detailed
information, etc. (current as of July, 2012). (> 77)
While watching a programme
Press [STATUS ].
Channel information appears.
1 Current Category
2 Encrypted broadcast
3 Set timer (> 37)
4 Subtitle
5 Teletext
6 Multiple audio/Sub Channel
7 Data service (Hybrid Broadcast Broadband
TV) (> 29)
To show detailed information
Press [STATUS ] again.
To hide the information screen
Press [EXIT ].
To switch between the current programme
and the next programme
Press [2, 1].
To switch to another channel
Press [3, 4], then press [OK].
Using TV Guide system
Page Down
Information
Page Up
Category+24 hoursTimer Rec.
SUN 01.01
TV Guide
8:00 - 9:45
SUN 01.01.2012 8:05 Category: All DVB Channels
8:00 8:30 9:00 9:30 10:00 10:30
OK
RETURN
Using channel information
To change Category
Press the blue button.
• To register your favourite channels
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Favourites Edit”, then press [OK].
4 Refer to “Favourites Edit”. (> 88)
HDD
71:20 DR
1
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer
10:30
1
Now
Dolby D
Change category
All DVB Channels
NEWS
9:00 - 11:00
Set timer


 
e.g.,
DMR-BCT820_720_721EG_eng.book 28 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
Når “
Watching broadcasts
VQT4G51
29
When “ ” appears in channel information
(> 28)
Press [STTL ].
• Press again to hide subtitle.
• Some subtitle contents can be displayed using Teletext.
(> right)
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
You can enjoy the interactive data services for
digital broadcasting.
To use Hybrid Broadcast Broadband TV
application, perform network connection and
settings. (> 20, 24)
When notification message is displayed:
Follow the on-screen instructions.
When the Teletext is included in data service:
When [TEXT ] is pressed, the Teletext of data
service will be displayed.
• Operation buttons:
[3, 4, 2, 1], [OK], number buttons or colour buttons, etc.
• Operations may vary depending on the broadcaster.
• On-screen instructions may not correspond to the remote
control buttons.
• It may take some time to show the data service.
• Not all the data services are available depending on the
broadcaster.
• Some functions of the data service may be deactivated
during recording.
When “ ” appears in channel information
(> 28)
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 95, Teletext)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 104)
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Multi Audio” or “Sub Channel”, then
press [OK].
4 Select the item.
Operations while watching broadcast
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT ] to exit the screen.
Switching audio
To use data service (Hybrid Broadcast
Broadband TV)
To show the Teletext
1 Press [TEXT ].
• When the Teletext of data service is
displayed, press [TEXT ] again.
Aspect
To select the contents in the broadcast
DMR-BCT820_720_721EG_eng.book 29 ページ ２０１２年８月１日 水曜日 午後５時１８分
“ vises i kanalinformation
(
a
27)
Tryk på [STTL
Watching broadcasts
VQT4G51
29
When “ ” appears in channel information
(> 28)
Press [STTL ].
• Press again to hide subtitle.
• Some subtitle contents can be displayed using Teletext.
(> right)
Press [AUDIO].
• Audio will switch according to the contents of
the programme every time it is pressed.
You can enjoy the interactive data services for
digital broadcasting.
To use Hybrid Broadcast Broadband TV
application, perform network connection and
settings. (> 20, 24)
When notification message is displayed:
Follow the on-screen instructions.
When the Teletext is included in data service:
When [TEXT ] is pressed, the Teletext of data
service will be displayed.
• Operation buttons:
[3, 4, 2, 1], [OK], number buttons or colour buttons, etc.
• Operations may vary depending on the broadcaster.
• On-screen instructions may not correspond to the remote
control buttons.
• It may take some time to show the data service.
• Not all the data services are available depending on the
broadcaster.
• Some functions of the data service may be deactivated
during recording.
When “ ” appears in channel information
(> 28)
2 Use [3, 4, 2, 1], number buttons or colour
buttons, etc. according to on-screen
instructions.
• You can change the display mode. (> 95, Teletext)
You can switch the screen mode.
Refer to “Switching the aspect ratio of the
screen”. (> 104)
When a programme includes audio signals etc.,
you can select signals.
1 Press [OPTION].
2 Select “Digital TV Menu”, then press [OK].
3 Select “Multi Audio” or “Sub Channel”, then
press [OK].
4 Select the item.
Operations while watching broadcast
To show subtitle
To change subtitle language
1 Press [OPTION].
2 Select “Subtitle Language” in “Digital TV
Menu”, then press [OK].
3 Select the desired language.
• Press [EXIT ] to exit the screen.
Switching audio
To use data service (Hybrid Broadcast
Broadband TV)
To show the Teletext
1 Press [TEXT ].
• When the Teletext of data service is
displayed, press [TEXT ] again.
Aspect
To select the contents in the broadcast
DMR-BCT820_720_721EG_eng.book 29 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
•
Tryk igen for at skjule underteksterne.
For at ændre undertekstsprog
1
Tryk på [OPTION].
2
Vælg “Subtitle Language” i “Digital TV Menu”,
og tryk derefter på [OK].
3
Vælg det ønskede sprog.
• Tryk på [EXIT U] for at forlade skærmen.
Getting started
SQT0351
9
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (> 77)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit does not guarantee connection with all USB
devices.
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Disc recorded on another device
• It may be necessary to finalize the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio
format), convert the recording mode to play
them back. (> 52, File Conversion)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 99)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 99).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
- DVD-RAM that cannot be removed from their cartridges
- 2.6 and 5.2 GB DVD-RAM, 12 cm
- DVD-Audio
- HD DVD
- Super Video CD, Super Audio CD, Video CD
- CD-ROM, Photo CD, PD, etc.
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
Notes
Notes for an External HDD (USB HDD)
Notes for the disc
e.g., BD-Video DVD-Video
DMR-BCT84_74EN_eng.book 9 ページ ２０１４年７月２４日 木曜日 午後５時３分
• Noget undertekstindhold kan vises ved hjælp af tekst-
TV. (
a
28)
Tryk på [AUDIO].
•
Audio skifter i overensstemmelse med indholdet
af programmet, hver gang der trykkes.
Aktuel kategori
Krypteret udsendelse
Indstil timeren (
a
36)
Undertekst
Tekst-TV
Multi audio / Sub kanal
For at vise undertekster
Skifte lyd
Kanalinformation vises
f.eks.
SQT0351 27