Operating Instructions

Se TV-udsendelser
For at skifte til den kanal, du tidligere har set
Tryk på [LAST VIEW
Watching broadcasts
VQT4G51
27
Watching broadcasts
Watching
broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
• Selection of channel is made easy by creating a Favourite
of the channels. (> 88, Favourites Edit)
• When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 46, 47, 3D Type, Signal Format)
If you have locked channels (> 90, Child Lock
List) or set a ratings level (> 90, Parental Rating),
you may be asked to enter the PIN. In that case,
enter the 4-digit PIN with the number buttons by
following the on-screen instructions.
• Make a note of the PIN you have decided on
in case you forget it.
• PIN can be changed via “PIN Entry”. (> 100)
To watch an encrypted broadcast, insert the CI
module into the CI slot. (> 14)
• Depending on the CI module, a PIN may be
demanded. If prompted to enter a PIN code,
enter the set PIN code with the number buttons.
• Set according to the CI module. (> 86, 97,
Common Interface)
You can select from the list of channel names.
2 Select the channel, then press [OK].
To skip unwanted channels
The channel is skipped next time you select the
channel.
1 While watching the broadcast to skip, press
[DEL].
2 Press [OK].
• You can select the skipped channel with the number
buttons.
• When you want to restore the skipped channel, edit the
channel list. (> 86, 89)
To edit the channel list
Refer to “Channel List”. (> 89)
Instructions for operations are generally
described using the remote control. (> 12)
1 Press [INPUT SELECT] and select “TV”,
then press [OK].
2 Press [CH WX] to select the channel.
• You can also select the channel by the
following operations
- Using number buttons.
- Using Channel List (> right)
- Using TV Guide system (> 28)
- Using channel information (> 28)
About the PIN for parental control
If encrypted channels do not appear
Using Channel List
1 Press [OK].
• To sort the channel, press the red button.
• To change the category, press the blue
button.
All DVB Channels
Select
View
RETURN
7
6
5
4
3
2
1
Page up
Page down
Category
123/ABC
Sorting 123...
Channel names
Encrypted channel
DMR-BCT820_720_721EG_eng.book 27 ページ ２０１２年８月１日 水曜日 午後５時１８分
].
• Denne funktion fungerer kun for de kanaler, du
har set i mere end 10 sekunder.
Sådan skifter du til de radiokanaler eller til alle
kanaler
Tryk på [RADIO/TV].
Indtast den 4-cifrede PIN-kode med taltasterne
ved at følge instruktionerne på skærmen.
• Notér PIN du har valgt, hvis du skulle
glemme den.
• PIN-kode (undtagen til CAM-moduler) kan
ændres via “PIN Entry”. (
a
94)
• For CAM-modulers PIN-kode, se manualen til dit
CAM-modul.
For at se et krypteret udsendelse, skal du indsætte
et CI-modul i et CI-slot. (a 14)
• Indstil i henhold til CI-modulet.
(a 82, 91, Common Interface)
Getting started
SQT0351
9
You can use an external HDD in the following two
ways. (A single HDD cannot handle those two
ways simultaneously.)
• For recorded titles
Moving titles in the built-in HDD to a USB HDD
to save the capacity of the built-in HDD.
• The USB HDD must first be registered on this
unit. (> 77)
• For data files
Playing back MP4, JPEG, MP3, etc. (data files)
in a USB HDD with this unit.
• The USB HDD must be formatted in FAT12,
FAT16, FAT32 and NTFS file system.
• The USB HDD over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• Although this unit can use USB 3.0 devices as USB 2.0
devices, in certain cases USB 3.0 devices cannot be used
due to differing connector shape, larger current ratings, etc.
(Use of USB 2.0 devices is recommended.)
• This unit does not recognise USB HDDs other than those in
which the size of one sector is 512-bytes or 4096-bytes.
(For details, consult the dealer of your USB HDD.)
• This unit does not guarantee connection with all USB
devices.
• Region management information
The unit can play back BD-Video/DVD-Video
discs of the following regions codes, including
“ALL”:
• Disc recorded on another device
• It may be necessary to finalize the disc, create
Top Menu or close the session on the
equipment used for recording to play on this
unit.
• [DVD-RW] Recorded in DVD Video Recording
(DVD-VR) format
- This unit can play back and copy to HDD.
- This unit does not support editing or
recording.
- It is possible to record and edit with
DVD-Video (DVD-V) format by formatting
discs with this unit.
• Recording may not be possible to discs which
were used for recording on other equipment.
• Play on other players
• [BD-RE] [BD-R] When these discs cannot be
played back on other Blu-ray Disc players, etc.
(e.g., title recorded with HE-AAC audio
format), convert the recording mode to play
them back. (> 52, File Conversion)
• [DVD-R] [DVD-RW] [+R] Finalisation is needed.
(> 99)
• [+RW] If the disc failed to play on other
equipment, we recommend you create a Top
Menu (> 99).
• [DVD-R] The disc created in AVCHD format can
only be played back on AVCHD compatible
equipment.
• Regarding 8 cm Disc
This unit cannot record or edit the 8 cm disc.
Only playback or copy to the HDD is possible.
• Discs that cannot be played
- DVD-RAM that cannot be removed from their cartridges
- 2.6 and 5.2 GB DVD-RAM, 12 cm
- DVD-Audio
- HD DVD
- Super Video CD, Super Audio CD, Video CD
- CD-ROM, Photo CD, PD, etc.
• Operation and sound quality of CDs that do not conform to
CD-DA specifications (copy control CDs, etc.) cannot be
guaranteed.
Notes
Notes for an External HDD (USB HDD)
Notes for the disc
e.g., BD-Video DVD-Video
DMR-BCT84_74EN_eng.book 9 ページ ２０１４年７月２４日 木曜日 午後５時３分
• Kanalvalget gøres lettere ved at skabe en favoritliste.
(
a
84, Favoritter Redigering)
•
Når du ser 3D-program, kan undertekster og TV Guide,
osv., muligvis ikke vises korrekt, afhængigt af indstillinger.
(
a
48, 49, 3D Type, Signal Format)
Hvis krypterede kanaler ikke vises
Hvis denne enhed kræver en PIN-kode
Instruktioner til generelt brug beskrives ved
hjælp af fjernbetjeningen. (
a
12)
1 Tryk på [INPUT SELECT] og vælg “TV”,
tryk derefter på [OK].
• Hvis operatørprofilen er ved at bliver
opdateret, kan et andet billede blive
vist på skærmen. (
a
28)
2 Tryk på [CH
Watching broadcasts
VQT5D92
27
Watching broadcasts
Watching
broadcasts
To switch to the channel you have previously
watched
Press [LAST VIEW ].
• This function will work only for the channels you
have watched for more than 10 seconds.
To switch to the radio channels or to the all
channels
Press [RADIO/TV].
• Selection of channel is made easy by creating a Favourite
of the channels. (> 86, Favourites Edit)
• When you are watching the 3D programme, subtitles and
TV Guide, etc., may not display correctly depending on the
settings. (> 47, 48, 3D Type, Signal Format)
Enter the PIN with the number buttons by
following the on-screen instructions.
• If you decide on a PIN, make a note it in case
you forgot it.
• PIN (except CAM’s) can be changed via “PIN
Entry”. (> 99)
• For CAM’s PIN, refer to your CAM’s operating
instructions.
To watch an encrypted broadcast, insert the CI
module into the CI slot. (> 14)
• Set according to the CI module. (> 84, 95,
Common Interface)
Instructions for operations are generally
described using the remote control. (> 12)
1 Press [INPUT SELECT] and select “TV”,
then press [OK].
• If the Operator profile is being updated, a
different display may appear on the
screen. (> 30)
2 Press [CH WX] to select the channel.
• You can also select the channel by the
following operations.
- Using number buttons
- Using Channel List (> 28)
- Using TV Guide system (> 28)
- Using channel information (> 29)
If this unit request a PIN
If encrypted channels do not appear
DMR-BCT83_73EN_eng.book 27 ページ ２０１３年７月１８日 木曜日 午前１０時２８分
] for at vælge kanal.
• Du kan også vælge kanal, på følgende
måder
- Brug talknapperne.
- Brug Channel List (
a
26)
- Gennem TV Guide-system (
a
26)
- Gennem kanalinformation (
a
27)
Se TV-udsendelser
SQT0351 25