Operating Instructions

Getting started
SQT0351
10
HDD and media information
To format an SD card
Refer to “Format Disc/Format Card”. (> 98)
• Usable memory is slightly less than the card capacity.
• If the SD card is formatted on other equipment, the time
necessary for recording may be longer or the card may not
be able to be used on this unit. In these cases, format the
card on this unit.
• SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards)
USB memories support FAT12, FAT16, FAT32
and NTFS file systems.
• The USB memory over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• This unit does not guarantee connection with all USB
devices.
• Do not touch the recorded surface of the discs
or the terminal surface of the SD cards.
• If there is dirt or condensation on the disc, wipe
with a damp cloth and then wipe dry.
Notes for the SD cards
• Compatible SD card
- SD Memory Card
(from 8 MB to 2 GB, FAT12 and FAT16
formats)
- SDHC Memory Card
(from 4 GB to 32 GB, FAT32 format)
- SDXC Memory Card
(48 GB, 64 GB, exFAT format)
• Using miniSD card or microSD card
Mini-type and micro-type cards can also be
used, but must be used with adaptor cards
(optional).
Notes for the USB memories
Media handling
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use ballpoint pens or other hard writing
implements, when writing on the label side of
the disc.
• Do not drop, stack, or impact discs.
• Do not place objects on discs.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rental discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs.
• Do not expose the terminals of the SD card to
water, garbage or other strange things.
• Do not place in the following areas:
- In hot places, such as under the direct
sunlight.
- In very dusty or humid areas.
- Locations susceptible to significant difference
in temperature (condensation can occur).
- Where static electricity or electromagnetic
waves occur.
DO DO NOT
DO DO NOT
DO NOT
DMR-BCT84_74EN_eng.book 10 ページ ２０１４年７月２４日 木曜日 午後５時３分
Getting started
SQT0351
10
HDD and media information
To format an SD card
Refer to “Format Disc/Format Card”. (> 98)
• Usable memory is slightly less than the card capacity.
• If the SD card is formatted on other equipment, the time
necessary for recording may be longer or the card may not
be able to be used on this unit. In these cases, format the
card on this unit.
• SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards)
USB memories support FAT12, FAT16, FAT32
and NTFS file systems.
• The USB memory over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• This unit does not guarantee connection with all USB
devices.
• Do not touch the recorded surface of the discs
or the terminal surface of the SD cards.
• If there is dirt or condensation on the disc, wipe
with a damp cloth and then wipe dry.
Notes for the SD cards
• Compatible SD card
- SD Memory Card
(from 8 MB to 2 GB, FAT12 and FAT16
formats)
- SDHC Memory Card
(from 4 GB to 32 GB, FAT32 format)
- SDXC Memory Card
(48 GB, 64 GB, exFAT format)
• Using miniSD card or microSD card
Mini-type and micro-type cards can also be
used, but must be used with adaptor cards
(optional).
Notes for the USB memories
Media handling
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use ballpoint pens or other hard writing
implements, when writing on the label side of
the disc.
• Do not drop, stack, or impact discs.
• Do not place objects on discs.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rental discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs.
• Do not expose the terminals of the SD card to
water, garbage or other strange things.
• Do not place in the following areas:
- In hot places, such as under the direct
sunlight.
- In very dusty or humid areas.
- Locations susceptible to significant difference
in temperature (condensation can occur).
- Where static electricity or electromagnetic
waves occur.
DO DO NOT
DO DO NOT
DO NOT
DMR-BCT84_74EN_eng.book 10 ページ ２０１４年７月２４日 木曜日 午後５時３分
Getting started
SQT0351
10
HDD and media information
To format an SD card
Refer to “Format Disc/Format Card”. (> 98)
• Usable memory is slightly less than the card capacity.
• If the SD card is formatted on other equipment, the time
necessary for recording may be longer or the card may not
be able to be used on this unit. In these cases, format the
card on this unit.
• SDHC Memory Cards and SDXC Memory Cards can be
used in equipment that is compatible with the appropriate
cards. (SDHC Memory Cards can also be used in
equipment compatible with SDXC Memory Cards)
USB memories support FAT12, FAT16, FAT32
and NTFS file systems.
• The USB memory over 2 TB is not usable.
• This unit supports USB 2.0 High Speed.
• This unit does not guarantee connection with all USB
devices.
• Do not touch the recorded surface of the discs
or the terminal surface of the SD cards.
• If there is dirt or condensation on the disc, wipe
with a damp cloth and then wipe dry.
Notes for the SD cards
• Compatible SD card
- SD Memory Card
(from 8 MB to 2 GB, FAT12 and FAT16
formats)
- SDHC Memory Card
(from 4 GB to 32 GB, FAT32 format)
- SDXC Memory Card
(48 GB, 64 GB, exFAT format)
• Using miniSD card or microSD card
Mini-type and micro-type cards can also be
used, but must be used with adaptor cards
(optional).
Notes for the USB memories
Media handling
• Do not attach labels or stickers to discs.
• Do not use disc cleaning sprays, benzine,
thinner, static electricity prevention liquids or
any other solvent.
• Do not use ballpoint pens or other hard writing
implements, when writing on the label side of
the disc.
• Do not drop, stack, or impact discs.
• Do not place objects on discs.
• Do not use the following discs:
- Discs with exposed adhesive from removed
stickers or labels (rental discs, etc.).
- Discs that are badly warped or cracked.
- Irregularly shaped discs.
• Do not expose the terminals of the SD card to
water, garbage or other strange things.
• Do not place in the following areas:
- In hot places, such as under the direct
sunlight.
- In very dusty or humid areas.
- Locations susceptible to significant difference
in temperature (condensation can occur).
- Where static electricity or electromagnetic
waves occur.
DO DO NOT
DO DO NOT
DO NOT
DMR-BCT84_74EN_eng.book 10 ページ ２０１４年７月２４日 木曜日 午後５時３分
HDD/USB HDD håndtering og pleje Når apparatet skal yttes
Rengøring
Når du sender denne enhed til reparation
Bortskaffelse eller overdragelse af denne enhed
Sikkerhedsforanstaltninger
• HDD er en højpræcisions enhed
HDD er et højpræcisions apparat til optagelse og
er let modtagelig for skader. Derfor skal du være
opmærksom på følgende punkter, mens
enheden er tændt, især under brug. Ellers kan
HDD og det optagede Indhold blive beskadiget:
- Udsæt ikke enheden for vibrationer og stød.
- Tag ikke netledningen fra stikkontakten.
• HDD er en midlertidig lagerenhed
• HDD er ikke en evig lagerenhed. Det anbefales
at gemme det optagede indhold på en disc,
eller at bevare de oprindelige data eller CD’er,
som de blev kopieret fra.
• Hvis du opdager et problem med HDD, f.eks.
mærkelige lyde, gem da øjeblikkeligt (Backup)
hele indholdet og bring apparatet til service.
Hvis du fortsætter med at bruge harddisken
med et problem, kan enheden eller indholdet
blive beskadiget.
• Hvis HDD eller USB HDD er beskadiget, kan
indholdet ikke gendannes.
Inden apparatet flyttes, skal du sikre at disc-skuff-
en er tom.
1 Bring enheden til standby. (Vent til “Goodbye”
forsvinder fra displayet.)
2 Fjern netledningen fra stikkontakten.
3 Flyttes først efter at apparatet er fuldstændig
stoppet (ca. 3 minutter) for at undgå at udsætte
for vibrationer og stød. (Selv efter at enheden
er i standby, fortsætter HDD drift i en kort tid.
• Placer enheden på en overflade, der er plan
og ikke udsættes for vibrationer eller stød.
• Placer ikke enheden på noget, der genererer
varme, f.eks. en Set Top Box osv.
• Placer enheden i et område, hvor kondens
ikke forekommer. Forhold, hvor kondens kan
forekomme
- Når der er en markant ændring i temperatur,
f.eks. i nærheden af aircondition, eller hvor kold
luft direkte påvirker enheden.
- Når der er høj luftfugtighed eller meget damp i
rummet.
I ovenstående situation, uden at tænde for
enheden, lad apparatet justere sig til stuetempera-
tur ved at vente 2-3 timer, indtil kondensen er
forsvundet.
• Enheden kan gå i stykker, hvis cigaretrøg
eller insektspray/damp osv. kommer ind i
apparatet.
Vedligeholdelse
• Denne enhed
- Tør af med en blød, tør klud.
- Brug aldrig sprit, fortynder eller rensebenzin til
rengøring af apparatet.
-
Før brug af en kemisk behandlet klud, læs om-
hyggeligt vejledningen, der fulgte med kluden.
• Denne enhed linse
• Brug Lens Cleaner (ekstraudstyr) til at rengøre
enhedens linse.
Registreringen af USB HDD kan være annulleret
under reparationen af denne enhed.
Du kan bruge USB HDD igen ved gen-registrering,
men alle optagelser på USB HDD mistes. I
sådanne tilfælde kan optaget indhold (data) ikke
gendannes.
Denne enhed kan indeholde privat information. Før
du bortskaffer eller overdrager denne enhed, bør
du gøre følgende for at slette dens data, bl.a.
personlig eller fortrolig information:
- Formater HDD (
a
82, 87)
- Vælg ”Shipping Condition” (
a
82, 95)
Lens cleaner: RP-CL720AE
• Denne linserenser er muligvis ikke tilgængelig
for salg i alle lande. I Danmark bedes du
spørge din Panasonic forhandler til råds.
Kom godt i gang
SQT0351 11