User guide

19
RQT7394
Getting started
On the DVD recorder
After step 5 (➡ page 16)
1 Press [3, 4] to select “Manual” and
press [ENTER].
2 Press [3, 4] to select “IP Address”
and press [ENTER].
3 Press the numbered buttons to enter
the number and press [ENTER].
≥Press [2, 1] to move the cursor.
≥Press [¢ CANCEL] to clear the numbers.
Repeat step 2 and 3 to enter “Subnet Mask”, “Default
Gateway” and “DNS Server” numbers.
IP Address
If the computer’s IP address is 192.168.0.15, enter
192.168.0. and then enter an arbitrary number, except 15,
between 2 and 254 (➡ page 18, step 4).
Subnet Mask
Enter the same set of digits as the computer’s Subnet mask
(➡ page 18, step 4).
Default Gateway
Enter the same set of digits as the computer’s Default
gateway (➡ page 18, step 4).
DNS Server
Enter the same set of digits as the computer’s Preferred
DNS server (➡ page 18, step 4).
Example:
§
Make a note of this IP address. You will need it when
operating this unit from the computer (➡ page 56).
4 Press [3, 4] to select “Set” and
press [ENTER].
≥Once the connection has been correctly established “Now
connected to the Local Area Network” will be displayed.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
To manually enter the DVD recorder’s IP Address
IP Address
§
:
192.168.0.14
Subnet Mask : 255.255.255.0
Default Gateway : 192.168.0.1
DNS Server : 192.168.0.1
SETUP
Disc
Video
Audio
Display
TV Screen
Channel
Set Up
TCP / IP Settings
Network
Set
Press “Set” to store the values after input.
IP Address
,,, . ,,, . ,,, . ,,,
Subnet Mask
,,, . ,,, . ,,, . ,,,
Default Gateway
,,, . ,,, . ,,, . ,,,
DNS Server
,,, . ,,, . ,,, . ,,,
7394en.book Page 19 Wednesday, March 30, 2005 9:45 AM