DMP-BDT320_VQT3V22_eng.book 1 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Owner’s Manual Blu-ray DiscTM Player Model No. DMP-BDT321 DMP-BDT320 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, contact: U.S.A.
DMP-BDT320_VQT3V22_eng.book 2 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Getting started THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions.
DMP-BDT320_VQT3V22_eng.book 3 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Unit ≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ≥ Do not place sources of naked flames, such as lighted candles, on this unit. Placement To reduce the risk of fire, electric shock or product damage, ≥ Do not install or place this unit in a bookcase, built-in cabinet or in another confined space.
DMP-BDT320_VQT3V22_eng.book 4 ページ ２０１２年１月１１日 Accessories Check the supplied accessories before using this unit. 1 Remote control (N2QAYB000710) Batteries for remote control 2 1 AC power supply cord (K2CB2CB00022) [For_Canada] The enclosed Canadian French label sheet corresponds to the English display on the unit. ≥ Product numbers provided in this Owner’s Manual correct as of December 2011. These may be subject to change. ≥ Do not use AC power supply cord with other equipment.
DMP-BDT320_VQT3V22_eng.
DMP-BDT320_VQT3V22_eng.book 6 ページ ２０１２年１月１１日 ∫ Discs that cannot be played in this unit Any other disc that is not specifically supported or previously described. ≥ DVD-RAM ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ [For_U.S.A.
DMP-BDT320_VQT3V22_eng.book 7 ページ ２０１２年１月１１日 水曜日 午後８時４９分 1 2 1 7 2 8 INTERNET 3 HOME 9 KEYS 4 5 OPTION R 6 RETURN G B Turn the unit on and off Show the Home screen of the VIERA Connect (> 21) 3 Show HOME menu (> 16) 4 Touchpad (> 8) Used for various operation Move the highlight, confirm the selection, etc.
DMP-BDT320_VQT3V22_eng.book 8 ページ ２０１２年１月１１日 Using the touchpad The touchpad of the remote control is used for various operations such as moving the highlight or pointer, confirming the selection, playback control, entering characters, etc. 水曜日 午後８時４９分 ∫ Switching the screen Some screens can be switched by lightly flicking your finger horizontally or vertically on the touchpad. Flick your finger quickly and release from the touchpad.
２０１２年１月１１日 Using the KEYS screen The KEYS screen that can perform item selection, playback control, text input, etc., is displayed on the screen when [KEYS] is pressed. KEYS screen operation will take priority over all other operation on the screen. 1 2 水曜日 午後８時４９分 Entering characters 1 When the keyboard screen appears: Move the highlight or the pointer onto “Input Mode”, then tap. You can select the input method from two types as follows. The mode switches each time “Input Mode” is selected.
DMP-BDT320_VQT3V22_eng.book 10 ページ ２０１２年１月１１日 水曜日 午後８時４９分 STEP 1 : Connecting to a TV Perform either one of the following connections in accordance with your TV input terminal. ≥ Before making any connections, we recommend that you temporarily disconnect all the units from AC power. ≥ Do not connect video signals through a video recorder. Due to copy guard protection the picture may not be displayed properly. ≥ Use the High Speed HDMI cables. Non-HDMI-compliant cables cannot be utilized.
DMP-BDT320_VQT3V22_eng.book 11 ページ ２０１２年１月１１日 水曜日 午後８時４９分 STEP 2 : Connecting to an amplifier/receiver Perform either one of the following connections in accordance with your amplifier/receiver input terminal. HDMI AV OUT HDMI IN HDMI OUT (ARC) HDMI IN (ARC) Amplifier/receiver ≥ Set “Digital Audio Output” (> 28). ≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT, then connect the TV and the amplifier/receiver.
DMP-BDT320_VQT3V22_eng.book 12 ページ ２０１２年１月１１日 水曜日 午後８時４９分 STEP 3 : Connecting to the network The following services can be used when this unit is connected to broadband. ≥ Firmware can be updated (> 15) ≥ You can enjoy BD-Live (> 20) ≥ You can enjoy VIERA Connect (> 21) ≥ You can access other devices (Home Network) (> 22) ≥ This unit supports Wi-Fi DirectTM and can make a wireless connection to wireless devices without router. You can use this function when enjoying Home Network feature, etc.
２０１２年１月１１日 STEP 5 : Settings Easy Setting After connecting your new player for the first time and pressing [Í], a screen for the basic settings will appear. 午後８時４９分 Easy Network Setting After completing “Easy Setting”, you can perform “Easy Network Setting”. Wired connection Select “Wired”. Preparation Turn on the television and select the appropriate video input on the television. 1 水曜日 Easy Network Setting Select a connection mode. Current setting : Wired Press [Í]. Setup screen appears.
DMP-BDT320_VQT3V22_eng.book 14 ページ ２０１２年１月１１日 ∫ “Search for wireless network” The available wireless networks will be displayed. 1 Select your network name. ≥ If your network name is not displayed, search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed, in this case enter manually. Wireless Settings Select a wireless network for connection.
DMP-BDT320_VQT3V22_eng.book 15 ページ ２０１２年１月１１日 Reprogramming the remote control If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. (> 32, “Remote Control Code”) 水曜日 午後８時４９分 Smart eco-sensor This mode will decrease the power consumption when the unit is in stand-by mode and the sensor does not detect people close by.
DMP-BDT320_VQT3V22_eng.book 16 ページ ２０１２年１月１１日 Inserting or removing media Playback 水曜日 午後８時４９分 HOME menu Major functions of this unit can be operated from the HOME menu. Preparation Turn on the television and select the appropriate video input on the television. 1 2 Press [Í] to turn on the unit. Operate the touchpad to select the item. Tap to select the centered item. Swipe or flick your finger up, down, left, or right to select other items. ≥ If there are any other items, repeat this step.
２０１２年１月１１日 水曜日 Multi User Mode Multi User Mode is a function that enables switching of multiple settings easily. Up to 4 people can use the unit with their own settings. The following settings can be personalized. ≥ The user icon ≥ The wallpaper of Home menu ≥ The audio and picture settings (> 24, 27) USER1 Network Blu-ray Disc Player Photos Setup Music B Personalize 2nd user A The user name and icon currently selected B Personalize a new user and switch the users with colored buttons.
DMP-BDT320_VQT3V22_eng.book 18 ページ ２０１２年１月１１日 Playback 1 Insert the media. Playback starts depending on the media. 2 Select the item to play. Repeat this procedure if necessary. ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Select [∫] from the KEYS screen when you have finished playback to protect the unit’s motor, your television screen and so on. ≥ DivX [For_Canada] and MKV: Successive play is not possible.
DMP-BDT320_VQT3V22_eng.book 19 ページ ２０１２年１月１１日 午後８時４９分 Displaying menus and playback information Quick playback control Basic operation can be performed by swiping the edge of the touchpad with your finger, such as the following. ≥ Perform the operation when the KEYS screen is not displayed. 水曜日 1 Repeatedly press [KEYS] to display the cursor key input screen. 2 Select a key. Stop Play See page 9 for the KEYS screen operation. Following functions may not work depending on the media and contents.
DMP-BDT320_VQT3V22_eng.book 20 ページ ２０１２年１月１１日 Enjoying 3D video and photos Preparation Connect 3D compatible TV to an HDMI AV OUT terminal of this unit using a High Speed HDMI Cable. (> 10, 11) ≥ Perform the necessary preparations for the TV. ≥ Play back following the instructions displayed on the screen. ≥ 3D Settings (> 26, 29) ≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue.
２０１２年１月１１日 Enjoying Network Service (NETFLIX, etc.) You can access information services from the VIERA Connect Home screen via the Internet. VIERA Connect provides a variety of selected Internet services such as the following.
DMP-BDT320_VQT3V22_eng.book 22 ページ ２０１２年１月１１日 Home Network feature Playing back contents on the DLNA server You can share photos, videos and music stored in the DLNA Certified media server (PC with Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this player. 水曜日 午後８時４９分 Using the Digital Media Controller You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).
２０１２年１月１１日 VIERA LinkTM “HDAVI ControlTM” What is VIERA Link “HDAVI Control”? VIERA LinkTM is a new name for EZ SyncTM. VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or amplifier/receiver under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details. Preparation 1 Set “VIERA Link” to “On” (> 32).
DMP-BDT320_VQT3V22_eng.book 24 ページ ２０１２年１月１１日 Option menu 水曜日 午後８時４９分 Settings Operation Menu A variety of playback operations and settings can be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. ∫ Soundtrack Show or change the soundtrack. About Multi User Mode ∫ Audio channel Select the audio channel number. : Settings of the items with this indication are saved by the respective users registered in the Home menu.
DMP-BDT320_VQT3V22_eng.book 25 ページ ２０１２年１月１１日 ∫ Secondary Video Video Select on/off of images. The recording method of original video appears. ≥ During search/slow-motion or frame-by-frame, only the primary video is displayed. Soundtrack Select on/off of audio and the language. ∫ Control Panel Display the Control Panel. Playing back while using VIERA Link, etc. e.g., EXIT 水曜日 午後８時４９分 Video Settings ∫ Picture Mode Select the picture quality mode during play.
DMP-BDT320_VQT3V22_eng.book 26 ページ ２０１２年１月１１日 Audio Settings ∫ Sound Effects*1, *2 Select the sound effect. ≥ Night Surround: Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily. ≥ Re-master: This feature gives you brighter sound by increasing the high frequency portion of the audio.
DMP-BDT320_VQT3V22_eng.book 27 ページ ２０１２年１月１１日 Setup menu Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus. About Multi User Mode : Settings of the items with this indication are saved by the respective users registered in the Home menu. Please refer to page 17 for details about user registration and switching. Press [HOME].
DMP-BDT320_VQT3V22_eng.book 28 ページ ２０１２年１月１１日 ∫ Still Mode (paused video) Select the type of picture shown when you pause playback. Auto Automatically selects the type of picture shown. Field Select if jittering occurs when “Auto” is selected. Frame Select if small text or fine patterns cannot be seen clearly when “Auto” is selected. ∫ Seamless Play The chapter segments in playlists are played seamlessly. ≥ Select “On”, when the picture freezes for a moment at the chapters segment in playlists.
DMP-BDT320_VQT3V22_eng.book 29 ページ ２０１２年１月１１日 ∫ 7.1ch Audio Reformatting Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch. ≥ If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) ≥ Audio reformatting is enabled in the following cases: – When you have selected “PCM” in “Digital Audio Output”. – When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM.
DMP-BDT320_VQT3V22_eng.book 30 ページ ２０１２年１月１１日 Network ∫ Easy Network Setting (> 13) ∫ Network Settings Perform network-related settings individually. Tap to show the following settings: ¾LAN Connection Mode Select the LAN connection method. ≥ Select “Wireless Master” when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected. ¾Wireless Settings This allows the wireless router and connection settings to be set.
２０１２年１月１１日 Registration Type Auto Allow connection to all the equipment that is accessing this unit. Manual Set the permission of the connection individually for the equipment that is accessing this unit. Remote Device List Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected. ¾ BD-Live Internet Access (> 20) You can restrict Internet access when BD-Live functions are used.
DMP-BDT320_VQT3V22_eng.book 32 ページ ２０１２年１月１１日 ¾VIERA Link Set to use “HDAVI Control” function when connected via HDMI cable to a device that supports “HDAVI Control”. ≥ Select “Off” when you do not want to use “HDAVI Control”. ∫ Unit Settings Tap to show the following settings: ¾Front Panel Display Changes the brightness of the unit’s display. ≥ If “Auto” is selected, the display is set to bright and only dimmed during playback. ¾Slot-in LED Control Set if the slot-in LED is to light up or not.
DMP-BDT320_VQT3V22_eng.book 33 ページ ２０１２年１月１１日 Troubleshooting guide 水曜日 午後８時４９分 Reference Other support information: “Customer Services Directory (United States and Puerto Rico)” (> 44) or “Limited Warranty (Only for CANADA)” (> 45). The following do not indicate a problem with this unit: – Regular disc rotating sounds. – Image disturbance during search. – Image disturbance when replacing 3D discs. ∫ Unit doesn’t respond to remote control or front panel buttons.
DMP-BDT320_VQT3V22_eng.book 34 ページ ２０１２年１月１１日 This unit does not recognize the USB connection correctly. ¾ Disconnect and reconnect the USB cable. If it still does not recognize the connection, turn the power of this unit off and on again. ¾ USB devices may not be recognized by this unit when connected using the following : – a USB hub – a USB extension cable ¾ If you connect USB HDD to this unit, use the USB cable that is supplied with the HDD.
２０１２年１月１１日 Audio Cannot switch audio. ¾ When connecting an amplifier/receiver using an OPTICAL terminal or an HDMI terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. (> 28) Cannot hear the desired audio type. ¾ Check the connections and the “Digital Audio Output” settings. (> 11, 28) ¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu. (> 28) Playback Disc cannot be played.
DMP-BDT320_VQT3V22_eng.book 36 ページ ２０１２年１月１１日 Messages The following messages or service numbers appear on the television or unit’s display. On the television Cannot play. ¾ You inserted an incompatible disc (Discs recorded in PAL video, etc.). Cannot display on this unit. ¾ You tried to play a non-compatible image. ¾ Confirm “SD” on the unit’s display is not displayed and re-insert the card. No disc inserted. ¾ The disc may be upside down. $ This operation is not available.
DMP-BDT320_VQT3V22_eng.book 37 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Hor F (“ ” stands for a number.) ¾ There is something unusual. ¾ Check the unit using the troubleshooting guide. If the service number remains displayed, do the following. 1 Disconnect the plug from the AC outlet, wait a few seconds, then reconnect it. 2 Press [Í/I] to turn the power on. If the service number remains displayed despite doing the above, request service from the dealer.
DMP-BDT320_VQT3V22_eng.
DMP-BDT320_VQT3V22_eng.book 39 ページ ２０１２年１月１１日 Specifications Signal system NTSC Operating temperature range i5 oC to i35 oC (i41 oF to i95 oF) Operating humidity range 10 % to 80 % RH (no condensation) Video output Output level: 1.
DMP-BDT320_VQT3V22_eng.book 40 ページ ２０１２年１月１１日 Audio information The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 28, Digital Audio Output) ≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format. “Digital Audio Output” Terminal “Bitstream” “PCM” HDMI AV Outputs using OUT original audio*1 BD-Video : 7.
DMP-BDT320_VQT3V22_eng.book 41 ページ ２０１２年１月１１日 水曜日 午後８時４９分 “AVCHD”, “AVCHD 3D”, “AVCHD Progressive” and “AVCHD 3D/Progressive” are trademarks of Panasonic Corporation and Sony Corporation. Java is a registered trademark of Oracle and/or its affiliates. Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. Manufactured under license under U.S.
DMP-BDT320_VQT3V22_eng.book 42 ページ ２０１２年１月１１日 水曜日 午後８時４９分 ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DLNA, the DLNA Logo and DLNA CERTIFIED are trademarks, service marks, or certification marks of the Digital Living Network Alliance.
DMP-BDT320_VQT3V22_eng.book 43 ページ ２０１２年１月１１日 水曜日 午後８時４９分 (1) MS/WMA This product is protected by certain intellectual property rights of Microsoft Corporation and third parties. Use or distribution of such technology outside of this product is prohibited without a license from Microsoft or an authorized Microsoft subsidiary. (2) MS/PlayReady/Final Product Labeling This product contains technology subject to certain intellectual property rights of Microsoft.
DMP-BDT320_VQT3V22_eng.book 44 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Limited Warranty (ONLY FOR U.S.A.
DMP-BDT320_VQT3V22_eng.book 45 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Limited Warranty (Only for CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc.
DMP-BDT320_VQT3V22_eng.book 46 ページ ２０１２年１月１１日 Referencia rápida en español 午後８時４９分 Reproducción básica (Spanish Quick Reference) Preparación Encienda el televisor y seleccione la entrada de vídeo adecuada en el televisor. Conexiones básicas Conexión a un televisor compatible con HDMI Cable HDMI 水曜日 1 Después de conectar su nuevo reprodutor y pulsar el botón de encendido, aparecerá la pantalla de la configuración básica.
DMP-BDT320_VQT3V22_eng.book 47 ページ ２０１２年１月１１日 Uso de la KEYS pantalla La pantalla KEYS para selección de opciones, control de reproducción, entrada de texto, etc., se visualiza cuando se pulsa [KEYS]. Las funciones de la pantalla KEYS tendrán prioridad sobre cualquier otra operación visualizada. 1 Seleccione la pantalla de funciones pulsando [KEYS] varias veces. ≥ Se puede cambiar de pantalla pasando el dedo en dirección horizontal. 2 Mueva el puntero hasta la tecla que desea seleccionar.
DMP-BDT320_VQT3V22_eng.book 48 ページ ２０１２年１月１１日 水曜日 午後８時４９分 Index A Audio Changing audio . . . . . .18 Language . . . . . . . .29, 38 B BD-Live . . . . . . . . . . . . . .20 D DivX . . . . . . . . . . . . . . . . .39 DLNA . . . . . . . . . . . . . . . . 22 F File format. . . . . . . . . . . .39 Firmware update . . . . . . . 15 K KEYS screen . . . . . . . . . . .9 L LAN . . . . . . . . . . . . . . . . .12 Language Audio . . . . . . . . . . . . . .29 Menu . . . . . . . . . . . . . .29 On-screen. . . . . . .
