Operating instructions

32
VQT3V25
Messages
The following messages or service numbers may
appear on the TV or unit’s display.
Cannot play.
Cannot play on this unit.
¾ You tried to play a non-compatible image.
No disc inserted.
¾ The disc may be upside down.
$ This operation is not available.
¾ Some operations are unsupported by the unit.
For example;
IP address is not set.
¾ The “IP Address” in “IP Address / DNS
Settings” is “---. ---. ---. ---”. Set the “IP
Address”, “Subnet Mask”, and “Gateway
Address”. (Select the automatic address
acquisition if necessary.)
SEt 
(“  ” stands for a number.)
¾ The remote control and main unit are using
different codes. Change the code on the
remote control.
H or F
(“  ” stands for a number.)
¾ There is something unusual.
¾ Check the unit using the troubleshooting
guide. If the service number remains
displayed, do the following.
If the service number remains displayed despite
doing the above, request service from the dealer.
Inform the dealer of the service number when
requesting service.
On the television
¾ You inserted an incompatible disc.
– During playback, reverse slow-motion or
reverse frame-by-frame is not possible.
The wireless access point currently has a low
network security setting. It is recommended
to change to a higher setting.
¾ Authentication type for the wireless LAN is
set to “Open system”, or the encryption type
is set to “No encryption”. It is recommended
to encrypt for safety reasons. For details,
refer to the instructions of the wireless router
being used. Encryption is required when
playing back video, etc., from DLNA
compatible devices.
On the unit’s display
Press and hold [OK] and
the indicated number
button at the same time
for more than 5 seconds.
1 Disconnect the plug from the household
mains socket wait a few seconds, then
reconnect it.
2 Press [Í/I] to turn the unit on.
DMP-BD77EB-VQT3V25.book 32 ページ ２０１２年１月１８日 水曜日 午後４時５２分