Operation Manual

Getting started
- 8 -
Control reference guide
When other Panasonic devices respond to the
remote control of the unit, change the remote
control code. (> 27)
SECONDARY
AUDIO
PIP
1
2
3
6
4
5
7
8
19
10
9
20
18
16
15
17
14
13
12
11
1 Turn the unit on and off
2 TV operation buttons
You can operate the Panasonic TV using this
unit’s remote control. Some buttons may not
work depending on the TV.
[Í TV] : Turn the TV on and off
[AV] : Change input
[ijVOL] : Adjust the volume
3 Select title numbers, etc./Enter numbers
4 Cancel
5 Change audio (> 16)
6 Basic playback control buttons (> 16)
7 Show the status messages (> 17)
8 Show Top menu (> 16)
9 Show Option menu (> 22)
10 Coloured buttons (red, green, yellow, blue)
Used for various purposes depending on the
display
11 Transmit the remote control signal
12 Open or close the disc tray (> 13)
13 Switch Secondary Video on/off
(Picture-in-picture) (> 22)
14 Switch Secondary Audio on/off
15 Show the Home Screen of Network Service
(> 19)
16 Exit the Menu screen
17 Show Pop-up menu (> 16)
18 Show HOME menu (> 14)
19 [3, 4, 2, 1] : Move the highlight for
selection
[OK] : Confirm the selection
(;1) : Frame-by-frame (> 16)
20 Return to previous screen
75 6
1 2 3 4
1 Disc tray (> 13)
2 USB port (> 13)
3 POWER LED
The LED lights up when the unit is turned on,
and flashes when error occurs. (> 31)
4 Remote control signal sensor
Distance: Within approx. 7 m
Angle: Approx. 20e up and down, 30e left and
right
5 Open or close the disc tray (> 13)
6 Basic playback control switches (> 16)
7 Standby/on switch (Í/I) (> 11)
Press to switch the unit from on to standby
mode or vice versa. In standby mode, the unit
is still consuming a small amount of power.
Rear panel terminals (> 9, 10)