Blu-ray Disc Player Operating Instructions

33
VQT2H86
Reference
The settings of the audio output vary depending on the connected equipment. Refer to the table below and set each of items.
Press [FUNCTION MENU] > select “Other Functions” > “[OK]”> select “Setup” > “[OK]”>
“Audio” > Set each item
For details of the each item, refer to page 26.
Recommended audio output setting
Example of connected equipment
TV via HDMI
*1
Receiver with
HD
audio
*2
decoder
via HDMI
Receiver without
HD
audio
*2
decoder
via HDMI
Receiver via OPTICAL
Setup menu
“Digital
Audio
Output”
“Dolby D/Dolby D
+/Dolby TrueHD”
“PCM” “Bitstream
”“PCM” “PCM”
“DTS/DTS-HD” “PCM” “Bitstream”“PCM” “PCM”
“BD-Video
Secondary Audio”
“Off” “Off” “Off” “Off”
“PCM Down Conversion” No effect No effect No effect
“Off
”
*3
“Downmix” “Stereo” No effect No effect
“Stereo
”
*4
≥ Because underlined items are the factory presets, it is not necessary to change these settings.
*1
If connected to TV via except HDMI, these settings have no effect.
*2
HD audio: Dolby Digital Plus, Dolby TrueHD, DTS-HD High Resolution Audio and DTS-HD Master Audio
*3
If the connected equipment that does not support 96 kHz, set to “On”.
*4
If the connected equipment that supports the virtual surround function, set to “Surround encoded”.
DMP-BD65_45_VQT2H86_eng.book 33 ページ ２００９年１２月５日 土曜日 午後７時１７分