User Guide

RQT8746
20
Menus Items Settings and details
Play
Repeat Play (Only when the elapsed time is being displayed on the unit display.)
Selects the item which you want to repeat. The items displayed differ depending on the type of disc.
≥All Entire disc
≥Chapter Chapter
≥Group Entire group
≥PL Playlist
≥Title Title (DVD-Video, etc.)
≥Track Track
≥Off
Select “Off” to cancel.
Picture
Picture Mode
[BD-V] [DVD-V] [DVD-VR] [VCD]
Select the picture quality mode during play.
≥Normal: Default setting
≥Soft: Soft picture with fewer video artifacts
≥Fine: Details are sharper
≥Cinema: Mellows movies, enhances detail in dark scenes.
≥User: You can make further adjustments.
Press [3, 4, 2, 1] to select “Picture Adjustment” and press [ENTER].
If the video adjustment buttons on the remote control are used, the setting is automatically
changed to “User”.
Contrast: Brightness: Sharpness: Colour:
Gamma: 3D-NR: Integrated DNR:
➡ For details, see page 14
DNR [BD-V] [DVD-V] [DVD-VR] [VCD]
Reduces mosaic-like distortion and picture degradation.
On ↔ Off
Progressive
§
Select “On” to enable progressive output.
≥Depending on the type of television used, the video may be stretched horizontally when video is output
in progressive mode. When this occurs, select “Off” and the video will then be output as “576i/480i”.
≥This setting will be fixed to “On” if you connect with an HDMI cable and set “HDMI Video Mode” to “On”
(➡ 23, “HDMI” tab).
]Note]
≥When connected to a regular television (CRT: Cathode ray tube) or a multi-system television using PAL
mode, even if it is progressive compatible, progressive output can cause some flickering. Turn off
“Progressive” if this occurs.
Transfer
§
[When “Progressive”
(➡ above) is set to
“On”.]
Select the method of conversion for progressive output to suit the type of material being played (➡ 30,
Glossary, Film and video).
When playing PAL discs (When the tray is opened, the setting will return to “Auto”.)
≥Auto: Automatically detects the film and video content, and appropriately converts it.
≥Video: Select when using “Auto”, and the content is distorted.
When playing NTSC discs
≥Auto1 (Normal): Automatically detects the film and video content, and appropriately converts it.
≥Auto2: In addition to “Auto1”, automatically detects film contents with different frame rates and
appropriately converts it.
≥Video: Select when using “Auto1” and “Auto2”, and the content is distorted.
4:3 Aspect [BD-V] [DVD-V] [DVD-VR] [VCD]
You can select how images made for 4:3 aspect screens are displayed on a 16:9 aspect television.
≥Zoom: Makes 4:3 letterbox video expand to full screen on a wide screen television (16:9).
≥Normal: The picture is displayed as a 4:3 ratio image in the centre of the screen.
Sound
V.S.S. [DVD-V] [DVD-VR]
(Dolby Digital with 2 channels or more only)
Enjoy a surround-like effect if you are using two front speakers only.
≥Emphasis ≥Natural ≥Off
≥Turn V.S.S. off if it causes distortion.
≥Do not use in combination with surround effects on other equipment.
≥V.S.S. does not work for bilingual recordings.
Dialog Enhancer [BD-V] [DVD-V] [DVD-VR]
(Dolby Digital with 3 channels or more only, including a centre channel)
The volume of the centre channel is raised to make dialog easier to hear.
On ↔ Off
Re-master [DVD-V] [DVD-VR] [CD]
≥1–3, Off
(➡ 14, Reproducing more natural audio)
Digital Filter When audio is output from AV terminal, 2ch AUDIO OUT terminals, or 7.1ch AUDIO OUT terminals
(➡ 8–10)
≥Normal: A clear timbre.
≥Slow: Gives music atmosphere, with softness and a feeling of depth.
Other
Position Select the position of the On-screen menu.
≥1 (Standard): Highest
to
≥5: Lowest
§
Only when you have selected “576p/480p”, “720p”, “1080i” in “Component Resolution” (➡ 23, “Connection” tab)
Settings 11 Changing settings with the On-screen menu
DMP_BD10EG.book Page 20 Wednesday, August 30, 2006 8:57 PM