DMP-BBT01_VQT3W08 _eng.book 1 ページ ２０１２年４月６日 金曜日 午後３時０分 Owner’s Manual Blu-ray DiscTM Player Model No. DMP-BBT01 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Please keep this manual for future reference. If you have any questions, contact: U.S.A.
DMP-BBT01_VQT3W08 _eng.book 2 ページ ２０１２年４月６日 金曜日 午後３時０分 Getting started THE FOLLOWING APPLIES IN THE U.S.A. AND CANADA IMPORTANT SAFETY INSTRUCTIONS Read these operating instructions carefully before using the unit. Follow the safety instructions on the unit and the applicable safety instructions listed below. Keep these operating instructions handy for future reference. 1 Read these instructions. 2 Keep these instructions. 3 Heed all warnings. 4 Follow all instructions.
２０１２年４月６日 Small object ≥ Keep the Memory Card out of reach of children to prevent swallowing. ≥ Keep the screw out of reach of children to prevent swallowing. CAUTION Unit ≥ This unit utilizes a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. ≥ Do not place sources of naked flames, such as lighted candles, on this unit.
DMP-BBT01_VQT3W08 _eng.book 4 ページ ２０１２年４月６日 Accessories Check the supplied accessories before using this unit. 1 Remote control (N2QAYB000710) Batteries for remote control 2 1 AC adaptor (RFEA221W) AC power supply cord (K2CB2CB00022) HDMI cable (K1HY19YY0012) Pedestal (RFA3385) 1 1 1 金曜日 午後３時０分 Unit and media care ∫ Clean this unit with a soft, dry cloth ≥ Never use alcohol, paint thinner or benzine to clean this unit.
DMP-BBT01_VQT3W08 _eng.
DMP-BBT01_VQT3W08 _eng.book 6 ページ ２０１２年４月６日 ∫ Discs that cannot be played in this unit Any other disc that is not specifically supported or previously described. ≥ DVD-RAM ≥ Super Audio CD ≥ Photo CD ≥ DVD-Audio ≥ Video CD and Super Video CD ≥ WMA discs ≥ [For_U.S.A.] : All types of DivX discs [For_Canada] : DivX Plus HD discs ≥ PAL discs ≥ HD DVD ≥ BD-Video discs recorded at a rate of 50 fields/sec ∫ Region management information BD-Video This unit can play BD-Video discs supporting the region code “A”.
DMP-BBT01_VQT3W08 _eng.book 7 ページ ２０１２年４月６日 金曜日 午後３時０分 1 2 1 Turn the unit on and off Show the Home screen of the VIERA Connect (> 22) 3 Show HOME menu (> 17) 4 Touchpad (> 8) Used for various operation Move the highlight, confirm the selection, etc.
DMP-BBT01_VQT3W08 _eng.book 8 ページ ２０１２年４月６日 Using the touchpad The touchpad of the remote control is used for various operations such as moving the highlight or pointer, confirming the selection, playback control, entering characters, etc. 金曜日 午後３時０分 ∫ Switching the screen Some screens can be switched by lightly flicking your finger horizontally or vertically on the touchpad. Flick your finger quickly and release from the touchpad.
２０１２年４月６日 Using the KEYS screen The KEYS screen that can perform item selection, playback control, text input, etc., is displayed on the screen when [KEYS] is pressed. KEYS screen operation will take priority over all other operation on the screen. 1 2 金曜日 午後３時０分 Entering characters 1 When the keyboard screen appears: Move the highlight or the pointer onto “Input Mode”, then tap. You can select the input method from two types as follows. The mode switches each time “Input Mode” is selected.
DMP-BBT01_VQT3W08 _eng.book 10 ページ ２０１２年４月６日 金曜日 午後３時０分 STEP 1 : Installing the Unit The unit can be installed in following four ways. ≥ Use the pedestal supplied with the unit. ≥ Beware of tipping or falling of the main unit when connecting the cables after installation. ≥ The remote control signal sensor that will operate will change depending on the installation, so please note this when pointing the remote control at the unit.
DMP-BBT01_VQT3W08 _eng.book 11 ページ ２０１２年４月６日 金曜日 午後３時０分 Vertical installation with pedestal To reattach (> below) Remote control signal sensor 1 Remove the screw at the bottom of the supplied pedestal using a screwdriver (+), and separate the top section and the bottom section of the pedestal. Top section of the pedestal is not used. 2 Align the rear end of the main unit against the rear end of the pedestal, and lower the main unit. Press and secure the main unit into the pedestal.
DMP-BBT01_VQT3W08 _eng.book 12 ページ ２０１２年４月６日 金曜日 午後３時０分 STEP 3 : Connecting to an amplifier/receiver Perform either one of the following connections in accordance with your amplifier/receiver input terminal. HDMI AV OUT HDMI cable (supplied) HDMI cable HDMI IN HDMI OUT (ARC) HDMI IN (ARC) Amplifier/receiver ≥ Set “Digital Audio Output” (> 29). ≥ When connecting to a non-3D compatible amplifier/receiver, connect this unit to a TV via HDMI AV OUT, then connect the TV and the amplifier/receiver.
DMP-BBT01_VQT3W08 _eng.book 13 ページ ２０１２年４月６日 金曜日 午後３時０分 STEP 4 : Connecting to the network Wireless LAN connection This unit can be connected to a wireless router wirelessly. Wireless router, etc. Internet ≥ For up-to-date compatibility information on your wireless router, refer to http://panasonic.jp/support/global/cs/ (This site is in English only.) For additional information about this unit refer to http://www.panasonic.com/consumer/support (For U.S.A.
DMP-BBT01_VQT3W08 _eng.book 14 ページ ２０１２年４月６日 STEP 6 : Settings Easy Setting After connecting your new player for the first time and pressing [Í], a screen for the basic settings will appear. 午後３時０分 Easy Network Setting After completing “Easy Setting”, you can perform “Easy Network Setting”. Wired connection Select “Wired”. Preparation Turn on the television and select the appropriate video input on the television. 1 金曜日 Easy Network Setting Select a connection mode.
２０１２年４月６日 ∫ “Search for wireless network” The available wireless networks will be displayed. 1 Select your network name. ≥ If your network name is not displayed, search again by pressing the [R] button on the remote control. Stealth SSID will not be displayed; in this case, enter manually. Wireless Settings Select a wireless network for connection.
DMP-BBT01_VQT3W08 _eng.book 16 ページ ２０１２年４月６日 Reprogramming the remote control If you have more than one Panasonic player/ recorder and the remote control operates both products at once, you will need to change the remote control code to prevent this occurrence. (> 33, “Remote Control Code”) 金曜日 午後３時０分 Firmware updates Occasionally, Panasonic may release updated firmware for this unit that may add or improve the way a feature operates. These updates are available free of charge.
DMP-BBT01_VQT3W08 _eng.book 17 ページ ２０１２年４月６日 Inserting or removing media Playback 金曜日 午後３時０分 HOME menu Major functions of this unit can be operated from the HOME menu. Preparation Turn on the television and select the appropriate video input on the television. Operate the touchpad to select the item. Tap to select the centered item. Swipe or flick your finger up, down, left, or right to select other items. ≥ If there are any other items, repeat this step. HOME To eject the disc Touch [<].
DMP-BBT01_VQT3W08 _eng.book 18 ページ ２０１２年４月６日 Multi User Mode Multi User Mode is a function that enables switching of multiple settings easily. Up to 4 people can use the unit with their own settings. The following settings can be personalized. ≥ The user icon ≥ The wallpaper of Home menu ≥ The audio and picture settings (> 25, 28) 午後３時０分 Smartphone used as a remote control can be registered with Personalize respect to each user. Smartphone ≥ Multiple users cannot be registered for one smartphone.
２０１２年４月６日 Playback 1 Insert the media. Playback starts depending on the media. 2 Select the item to play. Repeat this procedure if necessary. ≥ DISCS CONTINUE TO ROTATE WHILE MENUS ARE DISPLAYED. Select [∫] from the KEYS screen when you have finished playback to protect the unit’s motor, your television screen and so on. ≥ DivX [For_Canada] and MKV: Successive play is not possible.
DMP-BBT01_VQT3W08 _eng.book 20 ページ ２０１２年４月６日 午後３時０分 Displaying menus and playback information Quick playback control Basic operation can be performed by swiping the edge of the touchpad with your finger, such as the following. ≥ Perform the operation when the KEYS screen is not displayed. 金曜日 1 Repeatedly press [KEYS] to display the cursor key input screen. 2 Select a key. Stop or Play See page 9 for the KEYS screen operation.
２０１２年４月６日 Enjoying 3D video and photos Preparation Connect this unit to a 3D compatible TV. (> 11, 12) ≥ Perform the necessary preparations for the TV. ≥ Play back following the instructions displayed on the screen. ≥ 3D Settings (> 27, 30) ≥ Please refrain from viewing 3D images if you do not feel well or are experiencing visual fatigue. In the event that you experience dizziness, nausea, or other discomfort while viewing 3D images, discontinue use and rest your eyes.
DMP-BBT01_VQT3W08 _eng.book 22 ページ ２０１２年４月６日 VIERA Connect (Enjoying NETFLIX, etc.) VIERA Connect allows you to access some specific websites supported by Panasonic, and enjoy Internet contents such as photos, videos, etc. from VIERA Connect Home screen. This unit has no full browser function and all features of websites may not be available. VIERA Connect provides a variety of selected Internet services such as the following.
DMP-BBT01_VQT3W08 _eng.book 23 ページ ２０１２年４月６日 Home Network feature Playing back contents on the DLNA server You can share photos, videos and music stored in the DLNA Certified media server (PC with Windows 7 installed, smartphone, etc.) connected to your home network, and enjoy the contents with this player. 金曜日 午後３時０分 Using the Digital Media Controller You can use the smartphone, etc. as the Digital Media Controller (DMC) to play back contents from DLNA server on the Renderer (this unit).
DMP-BBT01_VQT3W08 _eng.book 24 ページ ２０１２年４月６日 VIERA LinkTM “HDAVI ControlTM” What is VIERA Link “HDAVI Control”? VIERA LinkTM is a new name for EZ SyncTM. VIERA Link “HDAVI Control” is a convenient function which will link the operations of this unit and a Panasonic TV (VIERA) or amplifier/receiver under “HDAVI Control”. You can use this function by connecting the equipment with an HDMI cable. See the operating instructions for connected equipment for operational details.
DMP-BBT01_VQT3W08 _eng.book 25 ページ ２０１２年４月６日 Option menu 金曜日 午後３時０分 Settings A variety of playback operations and settings can be performed from this menu. Available options differ depending on the playing contents and the condition of the unit. About Multi User Mode : Settings of the items with this indication are saved by the respective users registered in the Home menu. Please refer to page 18 for details about user registration and switching.
DMP-BBT01_VQT3W08 _eng.book 26 ページ ２０１２年４月６日 ∫ Secondary Video Video Select on/off for images. The recording method of original video appears. ≥ During search/slow motion or frame-by-frame, only the primary video is displayed. Soundtrack Select on/off for audio and language. ∫ Playback Information Window Displays the following. Audio/video attribute information of disc. Settings status of “Digital Audio Output” (> 29). HDMI output information.
２０１２年４月６日 Audio Settings ∫ Sound Effects*1, *2 Select the sound effect. ≥ Night Surround: Enjoy a movie with powerful sound even when the volume is kept low at night. The audio is set in such a way that it can be heard easily. ≥ Re-master: This feature gives you brighter sound by increasing the high frequency portion of the audio.
DMP-BBT01_VQT3W08 _eng.book 28 ページ ２０１２年４月６日 Setup menu Change the unit’s settings if necessary. The settings remain intact even if you switch the unit to standby. Some items in the Setup menu are common to the Option menu. You can get the same effect with both menus. About Multi User Mode : Settings of the items with this indication are saved by the respective users registered in the Home menu. Please refer to page 18 for details about user registration and switching. 1 2 3 Press [HOME].
２０１２年４月６日 ∫ Still Mode (paused video) Select the type of picture shown when you pause playback. Auto Automatically selects the type of picture shown. Field Select if jittering occurs when “Auto” is selected. Frame Select if small text or fine patterns cannot be seen clearly when “Auto” is selected. ∫ Seamless Play The chapter segments in playlists are played seamlessly. ≥ Select “On” when the picture freezes for a moment at the chapters segment in playlists.
DMP-BBT01_VQT3W08 _eng.book 30 ページ ２０１２年４月６日 ∫ 7.1ch Audio Reformatting Surround sound with 6.1ch or less is automatically expanded and played back at 7.1ch. ≥ If “Off” is selected, sound is played over the original number of channels. (Note that in the case of 6.1ch audio, playback will be at 5.1ch.) ≥ Audio reformatting is enabled in the following cases: – When you have selected “PCM” in “Digital Audio Output”. – When the audio is Dolby Digital, Dolby Digital Plus, Dolby TrueHD or LPCM.
２０１２年４月６日 Network ∫ Easy Network Setting (> 14) ∫ Network Settings Perform network-related settings individually. Tap to show the following settings: ¾ LAN Connection Mode Select the LAN connection method. ≥ Select “Wireless Master” when you make a direct wireless connection between this unit and a Home Network device. Internet connection is not available when this item is selected. ¾ Wireless Settings This allows the wireless router and connection settings to be set.
DMP-BBT01_VQT3W08 _eng.book 32 ページ ２０１２年４月６日 Registration Type Auto Allow connection to all the equipment that is accessing this unit. Manual Set the permission of the connection individually for the equipment that is accessing this unit. Remote Device List Registering/deregistering of the displayed equipment can be performed when “Manual” in “Registration Type” is selected. ¾BD-Live Internet Access (> 21) You can restrict Internet access when BD-Live functions are used.
DMP-BBT01_VQT3W08 _eng.book 33 ページ ２０１２年４月６日 ¾ VIERA Link Set to use “HDAVI Control” function when connected via HDMI cable to a device that supports “HDAVI Control”. ≥ Select “Off” when you do not want to use “HDAVI Control”. ∫ Unit Settings Tap to show the following settings: ¾ Standby LED Set the Standby/on LED to either light up or turn off when the unit is in standby mode. ¾ Unit Operation Sound Set the volume of operation of this unit.
DMP-BBT01_VQT3W08 _eng.book 34 ページ ２０１２年４月６日 金曜日 午後３時０分 Indicator illumination Reference Confirm the following items in correspondence to the status of the LED of the unit. An error condition exists when the Status LED is red. Open the panel at the side of the main unit and check the status of the indicator LEDs. If the red LED does not turn off even when following operation is performed, contact your dealer. Indicator LEDs Description The remote control and main unit are using different codes.
DMP-BBT01_VQT3W08 _eng.book 35 ページ ２０１２年４月６日 金曜日 午後３時０分 Red lights up Lights up The copyright protected disc cannot be played back. One of the devices connected to the main unit via the HDMI cable (TV, amplifier, etc.) does not support copyright protection. Red lights up Flashes The disc in use cannot be played back since the copyright information is invalid. Lights up Messages Cannot display on this unit. ¾ You tried to play a non-compatible image. No disc inserted. ¾ The disc may be upside down.
DMP-BBT01_VQT3W08 _eng.book 36 ページ ２０１２年４月６日 Troubleshooting guide Before requesting service, please perform the following steps. Do you have the latest firmware installed? Firmware updates may be released to correct operating irregularities that are discovered with certain movies. (> 16) 4 Make the following checks and visit our website for more information. For U.S.A. : www.panasonic.com/help Enter the model number. For Canada : http://www.panasonic.ca 4 Or visit our website to find a service center.
２０１２年４月６日 You have forgotten your ratings password. You want to cancel the ratings level. ¾ The ratings level returns to the factory preset. 1 Turn the unit on. 2 Press and hold [KEYS], [B] and [Y] at the same time for more than 5 seconds. – Status LED and INFO LED start to flash. 3 Press [R] repeatedly until the CALL LED lights up. (> 7, “Indicator LEDs”) 4 Press [G]. This unit does not recognize the USB connection correctly. ¾ Disconnect and reconnect the USB cable.
DMP-BBT01_VQT3W08 _eng.book 38 ページ ２０１２年４月６日 Audio Cannot switch audio. ¾ When connecting an amplifier/receiver using DIGITAL AUDIO OUT or HDMI AV OUT terminal, you cannot switch the audio if “Digital Audio Output” is set to “Bitstream”. Set “Digital Audio Output” to “PCM”. (> 29) Cannot hear the desired audio type. ¾ Check the connections and the “Digital Audio Output” settings. (> 12, 29) ¾ To output audio from a device connected with an HDMI cable, set “HDMI Audio Output” to “On” in the Setup menu.
２０１２年４月６日 Supplemental information Display Language Display Language Display Language English French German Italian Spanish Dutch Swedish Norwegian Danish Portuguese Russian JPN CHI KOR MAL VIE THA POL CES SLK HUN FIN Japanese Chinese Korean Malay Vietnamese Thai Polish Czech Slovak Hungarian Finnish ARA HIN PER IND MRI BUL RUM GRE TUR Arabic Hindi Persian Indonesian Maori Bulgarian Romanian Greek Turkish Others ∫ Language code list Language Code Abkhazian: 6566 Afar: 6565 Afrikaans: 6570 Albanian:
DMP-BBT01_VQT3W08 _eng.book 40 ページ ２０１２年４月６日 金曜日 午後３時０分 Specifications Specifications are subject to change without notice.
DMP-BBT01_VQT3W08 _eng.book 41 ページ ２０１２年４月６日 Audio information The audio output differs depending on which terminals are connected to the amplifier/receiver, and the settings on the unit. (> 29, Digital Audio Output) ≥ The number of channels listed is the maximum possible number of output channels when connected to amplifier/ receiver compatible with the respective audio format. “Digital Audio Output” Terminal “Bitstream” “PCM” HDMI AV Outputs using OUT original audio*1 BD-Video : 7.
DMP-BBT01_VQT3W08 _eng.book 42 ページ ２０１２年４月６日 金曜日 午後３時０分 MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson. SDXC Logo is a trademark of SD-3C, LLC. “DVD Logo” is a trademark of DVD Format/Logo Licensing Corporation. The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance. The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance. “Wi-Fi”, “Wi-Fi Protected Setup”, “Wi-Fi Direct”, “WPA” and “WPA2” are marks or registered marks of the Wi-Fi Alliance.
DMP-BBT01_VQT3W08 _eng.book 43 ページ ２０１２年４月６日 金曜日 午後３時０分 gSOAP Public License 1.3 Part of the software embedded in this product is gSOAP software. Portions created by gSOAP are Copyright (C) 2001-2009 Robert A. van Engelen, Genivia inc. All Rights Reserved. THE SOFTWARE IN THIS PRODUCT WAS IN PART PROVIDED BY GENIVIA INC AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
DMP-BBT01_VQT3W08 _eng.book 44 ページ ２０１２年４月６日 金曜日 午後３時０分 Limited Warranty (ONLY FOR U.S.A.
DMP-BBT01_VQT3W08 _eng.book 45 ページ ２０１２年４月６日 金曜日 午後３時０分 Limited Warranty (Only for CANADA) Panasonic Canada Inc. 5770 Ambler Drive, Mississauga, Ontario L4W 2T3 PANASONIC PRODUCT - LIMITED WARRANTY Panasonic Canada Inc.
DMP-BBT01_VQT3W08 _eng.book 46 ページ ２０１２年４月６日 Referencia rápida en español 午後３時０分 Reproducción básica (Spanish Quick Reference) Preparación Encienda el televisor y seleccione la entrada de vídeo adecuada en el televisor. Conexiones básicas Conexión a un televisor compatible con HDMI Cable HDMI (suministrado) 金曜日 1 Pulse [Í] para encender la unidad. Después de conectar su nuevo reprodutor y pulsar el botón de encendido, aparecerá la pantalla de la configuración básica. HDMI IN 2 Inserte el medio.
DMP-BBT01_VQT3W08 _eng.book 47 ページ ２０１２年４月６日 Uso de la KEYS pantalla La pantalla KEYS para selección de opciones, control de reproducción, entrada de texto, etc., se visualiza cuando se pulsa [KEYS]. Las funciones de la pantalla KEYS tendrán prioridad sobre cualquier otra operación visualizada. 1 2 3 Seleccione la pantalla de funciones pulsando [KEYS] varias veces. ≥ Se puede cambiar de pantalla pasando el dedo en dirección horizontal. Mueva el puntero hasta la tecla que desea seleccionar.
DMP-BBT01_VQT3W08 _eng.book 48 ページ ２０１２年４月６日 金曜日 午後３時０分 Index A Audio Changing audio . . . . . .19 Language . . . . . . . .30, 39 B BD-Live . . . . . . . . . . . . . .21 D DivX . . . . . . . . . . . . . . . . .40 DLNA . . . . . . . . . . . . . . . . 23 F File format. . . . . . . . . . . .40 Firmware update . . . . . . . 16 K KEYS screen . . . . . . . . . . .9 L LAN . . . . . . . . . . . . . . . . .13 Language Audio . . . . . . . . . . . . . .30 Menu . . . . . . . . . . . . . .30 On-screen. . . . . . . .
