Operating Instruction
3. Recording Modes
86
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform Programme Shift by rotating the rear dial.
A Programme Shift indication
• It will switch between Programme Shift operation and
Exposure Compensation operation (P161) every time
the rear dial is pressed while the values are displayed.
• To cancel Programme Shift, turn the camera off or rotate the rear dial until the Programme
Shift indication disappears.
Programme Shift is easily cancelled by setting [Fn Button Set] on the [Custom] menu to
[One Push AE]. (P94)
Programme Shift
Displaying/not displaying the exposure meter
> [Custom] > [Expo.Meter] > [ON]/[OFF]
B Exposure meter
• Set to [ON] to display the Exposure meter when correcting
exposure, performing Programme Shift, setting aperture,
and setting shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the display information for screen by
pressing [DISP.]. (P45)
• The Exposure meter disappears after approximately 4 seconds if no operation is performed.
9898
0
2
00
604.0 604.0
250 15
4.0 5.6 8.0
3060125
SSSS
SS
F
F
A
MENU
9898
0
2
00
604.0 604.0
250 15
4.0 5.6 8.0
3060125
SSSS
SS
F
F
B
86
3. Načini snimanja
Promjena vrijednosti
U načinu rada programa automatske ekspozicije možete mijenjati postavljenu vrijednost
otvora blende i brzinu zatvarača bez promjene ekspozicije. To se naziva promjenom
vrijednosti.
Možete zamutiti pozadinu smanjivanjem vrijednosti otvora blende ili snimiti objekt
u pokretu s više dinamike usporavanjem brzine zatvarača kad snimate fotograje u
programu automatske ekspozicije.
1 Napola pritisnite okidač da bi se na zaslonu pojavile vrijednost otvora blende i
brzina zatvarača.
2 Tijekom prikaza vrijednosti (oko 10 sekundi),
promijenite vrijednosti okretanjem stražnjeg
kotačića.
Ⓐ Pokazatelj promjene vrijednosti
• Prebacit će se s mijenjanja vrijednosti na
kompenzaciju ekspozicije (161. str.) svaki put kad se pritisne stražnji kotačić dok su
prikazane vrijednosti.
• Za poništavanje promjene vrijednosti, isključite fotoaparat ili zakrećite stražnji kotačić
sve dok ne nestane pokazatelj promjene vrijednosti.
Funkcija promjene vrijednosti jednostavno se može poništiti postavljanjem funkcije [Fn
Button Set] (Postavljanje funkc. gumba) u izborniku [Custom] na [One Push AE] (Auto.
ekspozicija jednim pritiskom). (94. str.)
Prikazivanje/neprikazivanje mjerača ekspozicije
→ [Custom] (Prilagođeno) → [Expo.Meter] (Mjerač ekspozicije) →
[ON]/[OFF]
Ⓑ mjerač ekspozicije
• Postavite na [ON] za prikaz mjerača ekspozicije kad
popravljate ekspoziciju, mijenjate vrijednosti, postavljate
otvor blende i brzinu zatvarača.
• Neprikladna područja raspona prikazana su crvenom
bojom.
• Kad se mjerač ekspozicije ne prikazuje, promijenite prikaz
informacija na zaslonu pritiskom na [DISP.]. (45. str.)
• Mjerač ekspozicije nestaje nakon približno 4 sekunde ako se ne obavi nikakva radnja.
MENU
3. Recording Modes
86
In Programme AE Mode, you can change the preset aperture value and shutter speed
without changing the exposure. This is called Programme Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Programme AE Mode.
1 Press the shutter button halfway and display the aperture value and shutter
speed value on the screen.
2 While the values are displayed (about 10 seconds),
perform Programme Shift by rotating the rear dial.
A Programme Shift indication
• It will switch between Programme Shift operation and
Exposure Compensation operation (P161) every time
the rear dial is pressed while the values are displayed.
• To cancel Programme Shift, turn the camera off or rotate the rear dial until the Programme
Shift indication disappears.
Programme Shift is easily cancelled by setting [Fn Button Set] on the [Custom] menu to
[One Push AE]. (P94)
Programme Shift
Displaying/not displaying the exposure meter
> [Custom] > [Expo.Meter] > [ON]/[OFF]
B Exposure meter
• Set to [ON] to display the Exposure meter when correcting
exposure, performing Programme Shift, setting aperture,
and setting shutter speed.
• Unsuitable areas of the range are displayed in red.
• When the Exposure meter is not displayed, switch the display information for screen by
pressing [DISP.]. (P45)
• The Exposure meter disappears after approximately 4 seconds if no operation is performed.
9898
0
2
00
604.0 604.0
250 15
4.0 5.6 8.0
3060125
SSSS
SS
F
F
A
MENU
9898
0
2
00
604.0 604.0
250 15
4.0 5.6 8.0
3060125
SSSS
SS
F
F
B