Operating Instruction
263
11. Using the Wi-Fi function
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P261)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the
QR code will be enlarged. When it is difficult to
scan the QR code, try enlarging it.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone.
7 Select the
SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image
App”. (P261)
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC
263
11. Using the Wi-Fi function
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P261)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the
QR code will be enlarged. When it is difficult to
scan the QR code, try enlarging it.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone.
7 Select the
SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image
App”. (P261)
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC
263
11. Using the Wi-Fi function
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P261)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the
QR code will be enlarged. When it is difficult to
scan the QR code, try enlarging it.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone.
7 Select the
SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image
App”. (P261)
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC
263
11. Using the Wi-Fi function
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P261)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the
QR code will be enlarged. When it is difficult to
scan the QR code, try enlarging it.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone.
7 Select the
SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image
App”. (P261)
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC
263
11. Using the Wi-Fi function
If you are using an iOS device
When scanning the QR code to set up a connection
(If you are reconnecting the camera, steps 1 to 5 are not required)
1 Start “Image App”. (P261)
2 Select [QR code], and then select [OK].
3 Using “Image App”, scan the QR code
displayed on the screen of the camera.
•
If you press [MENU/SET] on the camera, the
QR code will be enlarged. When it is difficult to
scan the QR code, try enlarging it.
4 Install the profile of “IMAGE APP”.
•
A message will be displayed on the browser.
• If the smartphone is locked with a passcode, enter the
passcode to unlock the smartphone.
5 Press the home button to close the browser.
6 Turn on the Wi-Fi function in the setting menu of the smartphone.
7 Select the
SSID displayed on the screen of the camera.
8 Return to the home screen, and then start “Image
App”. (P261)
IMAGE APP
Panasonic Corporation
Wi-Fi
Wi-Fi
0123456789ABC
Wi-Fi
0123456789ABC
263
Ako se koristite uređajem iOS
Povezivanje očitavanjem QR-koda
(Kod ponovnog povezivanja fotoaparata nije potrebno obaviti korake od do )
Pokrenite "Image App". (261 str.)
Odaberite [QR code] (QR kod), zatim
odaberite [OK] (U redu).
S pomoću aplikacije "Image App" očitajte QR-
kod prikazan na zaslonu fotoaparata.
• Ako pritisnete [MENU/SET] na fotoaparatu,
povećat će se QR kod. Ako je teško očitati QR-
kod, uvećajte ga.
Instalirajte prol aplikacije "IMAGE APP".
• Prikazat će se poruka na pregledniku.
• Ako je pametni telefon zaštićen lozinkom,
unesite lozinku da biste otključali pametni
telefon.
Pritisnite početni gumb da biste zatvorili preglednik.
Uključite funkciju Wi-Fi u izborniku postavki na pametnom telefonu.
Odaberite SSID prikazan na zaslonu fotoaparata.
Vratite se na početni zaslon i pokrenite aplikaciju
"Image App" (261. str.)
11. Korištenje funkcijom Wi-Fi