Operating Instruction

193
7. Functions Customised for Various Subjects and Purposes
Using screens and displays suitable for
recording
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative (P161) referring to the histogram (P47) and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P64) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1] → [Zebra 2] → [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] → [OFF], allowing
you to switch the setting quickly.
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF] —
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
•
You can select a brightness value between [50%] and [105%]. In [Zebra 2],
you can select [OFF]. If you select [100%] or [105%], only the areas that
are already white saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be processed as a zebra
pattern will be.
MENU
193
Upotreba zaslona i prikaza prikladnih za
snimanje
Provjera bijelo zasićenih područja ([Zebra Pattern] (Uzorak zebre))
Primjenjivi načini rada:
Možete pregledati bijela zasićena područja prikazivanjem područja koja su iznad
određene razine osvijetljenosti kao uzorak zebre. Možete postaviti minimalnu razinu
osvijetljenosti (svjetline) koja će se obraditi kao uzorak zebre.
→ [Custom] (Prilagođeno) → [Zebra Pattern] (Uzorak zebre)
[ZEBRA1]
Prikazuje područja iznad određene razine
osvijetljenosti kao uzorak zebre nagnut udesno.
[ZEBRA2]
Prikazuje područja iznad određene razine
osvijetljenosti kao uzorak zebre nagnut ulijevo.
[OFF] (Isklj.) —
[SET] (Postavi)
Postavlja minimalnu razinu svjetline za svaki uzorak zebre.
[Zebra 1]/[Zebra 2]
Pritisnite ▲/▼ da biste odabrali svjetlinu i zatim pritisnite
[MENU/SET].
• Možete odabrati vrijednost svjetline između [50%] i [105%]. U načinu
[Zebra 2], možete odabrati [OFF]. Ako odaberete [100%] ili [105%],
u uzorku zebre prikazat će se samo područja koja su već zasićena
bijelom bojom. Što je manja vrijednost, to će raspon svjetline koji će
biti obrađen u uzorku zebre biti veći.
• Ako postoje bijela zasićena područja, preporučujemo da kompenzirate ekspoziciju prema
negativnoj vrijednosti (161. str.), prema histogramu (47. str.) i zatim snimite fotograju.
• Prikazani uzorci zebre neće se snimiti.
• Ako dodijelite [Zebra Pattern] funkciji [Fn Button Set] (64. str.) u izborniku [Custom], uzorak
zebre mijenjat će se na sljedeći način svaki put kada pritisnete funkcijski gumb kojemu je
dodijeljena funkcija: [Zebra 1] → [Zebra 2] → [OFF].
Kada je [Zebra 2] postavljeno na [OFF], postavke se mijenjaju redoslijedom [Zebra 1] →
[OFF], što vam omogućuje da brzo promijenite postavku.
MENU
7. Funkcije prilagođene za različite objekte i namjene
193
7. Functions Customised for Various Subjects and Purposes
Using screens and displays suitable for
recording
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative (P161) referring to the histogram (P47) and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P64) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1] → [Zebra 2] → [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] → [OFF], allowing
you to switch the setting quickly.
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF] —
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
•
You can select a brightness value between [50%] and [105%]. In [Zebra 2],
you can select [OFF]. If you select [100%] or [105%], only the areas that
are already white saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be processed as a zebra
pattern will be.
MENU
193
7. Functions Customised for Various Subjects and Purposes
Using screens and displays suitable for
recording
Applicable modes:
You can check areas that may be white saturated by displaying areas above a certain
luminance level in a zebra pattern. You can also set the minimum luminance level
(brightness) to be processed as a zebra pattern.
•
If there are any white saturated areas, we recommend compensating the exposure towards
negative (P161) referring to the histogram (P47) and then taking the picture.
• Displayed zebra patterns will not be recorded.
• If you assign [Zebra Pattern] to [Fn Button Set] (P64) in the [Custom] menu, each time you
press the function button to which the setting is assigned, the zebra pattern toggles as follows:
[Zebra 1] → [Zebra 2] → [OFF].
When [Zebra 2] is set to [OFF], the setting toggles in the order of [Zebra 1] → [OFF], allowing
you to switch the setting quickly.
Checking areas that may be white saturated ([Zebra Pattern])
> [Custom] > [Zebra Pattern]
[ZEBRA1]
Displays areas above a certain luminance level by a
right-leaning zebra pattern.
[ZEBRA2]
Displays areas above a certain luminance level by a
left-leaning zebra pattern.
[OFF] —
[SET]
Sets the minimum brightness level for each zebra pattern.
[Zebra 1]/[Zebra 2]
Press 3/4 to select the brightness, and press [MENU/SET].
•
You can select a brightness value between [50%] and [105%]. In [Zebra 2],
you can select [OFF]. If you select [100%] or [105%], only the areas that
are already white saturated are displayed in a zebra pattern. The smaller
the value is, the wider the brightness range to be processed as a zebra
pattern will be.
MENU